A long long time ago the register keyword told the compiler to store
the corresponding variable in a CPU register, but it is not relevant
for any compiler used in the FreeBSD world today.
ANSIfy related prototypes while here.
Reviewed by: cem, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10193
is blocked. The spurious wakeup might result in spurious EINTR.
The reschedule_signals() function is called when the calling thread
has the signal mask changed. For each newly blocked signal, we try to
find a thread which might have the signal not blocked. If no such
thread exists, sigtd() returns random thread, which must not be waken
up. I decided that re-checking, as suggested by PR submitter, is more
reasonable change than to change sigtd() interface, due to other uses
of sigtd(). signotify() already performs this check.
Submitted by: Duane <parakleta@darkreality.org>
PR: 219228
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When a thread enters ptracestop(), for example because it had received
SIGSTOP from ptrace(PT_ATTACH), it attempts to suspend other threads in
the same process. In the case of a thread sleeping interruptibly in an
SBDRY section, sig_suspend_threads() must wake the thread and allow it to
reach the user-mode boundary. However, sig_suspend_threads() would
erroneously avoid waking up such threads, resulting in an apparent hang.
Reviewed by: kib
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The previous misuse of sys_sigqueue() was sending random register or
stack garbage to 64-bit targets. The freebsd32 implementation preserves
the sival_int member of value when signaling a 64-bit process.
Document the mixed ABI implementation of union sigval and the
incompability of sival_ptr with pointer integrity schemes.
Reviewed by: kib, wblock
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10605
resulting in a process dumping core in the corefile.
Also extend procstat to view select members of 'struct ptrace_lwpinfo'
from the contents of the note.
Sponsored by: Dell EMC Isilon
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
Suppose a traced process is stopped in ptracestop() due to receipt of a
SIGSTOP signal, and is awaiting orders from the tracing process on how
to handle the signal. Before sending any such orders, the tracing
process exits. This should kill the traced process. But suppose a second
thread handles the SIGKILL and proceeds to exit1(), calling
thread_single(). The first thread will now awaken and will have a chance
to check once more if it should go to sleep due to the SIGSTOP. It must
not sleep after P_SINGLE_EXIT has been set; this would prevent the
SIGKILL from taking effect, leaving a stopped orphan behind after the
tracing process dies.
Also add new tests for this condition.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9890
When a thread is stopped in ptracestop(), the ptrace(2) user may request
a signal be delivered upon resumption of the thread. Heretofore, those signals
were discarded unless ptracestop()'s caller was issignal(). Fix this by
modifying ptracestop() to queue up signals requested by the ptrace user that
will be delivered when possible. Take special care when the signal is SIGKILL
(usually generated from a PT_KILL request); no new stop events should be
triggered after a PT_KILL.
Add a number of tests for the new functionality. Several tests were authored
by jhb.
PR: 212607
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
In collaboration with: jhb
Differential Revision: https://reviews.freebsd.org/D9260
Use C99 designators to set the value of each slot and the nitems macro to
check for valid entries. In the process, switch to indexing by signal
number rather than signal-1 for improved clarity.
Obtained from: CheriBSD (a6053c5abf03a5f53bbfcdd3a26429383f67e09f)
Sponsored by: DARPA, AFRL
Reviewed by: kib
target. Due to a way issignal() selects the next signal to deliver
and report, if the simultaneous or already pending another signal
exists, that signal might be reported by the next waitpid(2) call.
This causes minor annoyance for debuggers, which must be prepared to
take any signal as the first event, then filter SIGSTOP later.
More importantly, for tools like gcore(1), which attach and then
detach without processing events, SIGSTOP might leak to be delivered
after PT_DETACH. This results in the process being unintentionally
stopped after detach, which is fatal for automatic tools.
The solution is to force SIGSTOP to be the first signal reported after
the attach. Attach code is modified to set P2_PTRACE_FSTP to indicate
that the attaching ritual was not yet finished, and issignal() prefers
SIGSTOP in that condition. Also, the thread which handles
P2_PTRACE_FSTP is made to guarantee to own p_xthread during the first
waitpid(2). All that ensures that SIGSTOP is consumed first.
Additionally, if P2_PTRACE_FSTP is still set on detach, which means
that waitpid(2) was not called at all, SIGSTOP is removed from the
queue, ensuring that the process is resumed on detach.
In issignal(), when acting on STOPing signals, remove the signal from
queue before suspending. Otherwise parallel attach could result in
ptracestop() acting on that STOP as if it was the STOP signal from the
attach. Then SIGSTOP from attach leaks again.
As a minor refactoring, some bits of the common attach code is moved
to new helper proc_set_traced().
Reported by: markj
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7256
number of core files allowed by a particular process when using the %I core
file name pattern.
Sanity check at compile time to ensure the value is within the valid range of
0-10.
Reviewed by: jtl, sjg
Approved by: sjg (mentor)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D6812
ptrace() now stores a mask of optional events in p_ptevents. Currently
this mask is a single integer, but it can be expanded into an array of
integers in the future.
Two new ptrace requests can be used to manipulate the event mask:
PT_GET_EVENT_MASK fetches the current event mask and PT_SET_EVENT_MASK
sets the current event mask.
The current set of events include:
- PTRACE_EXEC: trace calls to execve().
- PTRACE_SCE: trace system call entries.
- PTRACE_SCX: trace syscam call exits.
- PTRACE_FORK: trace forks and auto-attach to new child processes.
- PTRACE_LWP: trace LWP events.
The S_PT_SCX and S_PT_SCE events in the procfs p_stops flags have
been replaced by PTRACE_SCE and PTRACE_SCX. PTRACE_FORK replaces
P_FOLLOW_FORK and PTRACE_LWP replaces P2_LWP_EVENTS.
The PT_FOLLOW_FORK and PT_LWP_EVENTS ptrace requests remain for
compatibility but now simply toggle corresponding flags in the
event mask.
While here, document that PT_SYSCALL, PT_TO_SCE, and PT_TO_SCX both
modify the event mask and continue the traced process.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7044
calculate appropriate return value for stops. Simplify the code by
using them.
Fix typo in sig_suspend_threads(). The thread which sleep must be
aborted is td2. (*)
In issignal(), when handling stopping signal for thread in
TD_SBDRY_INTR state, do not stop, this is wrong and fires assert.
This is yet another place where execution should be forced out of
SBDRY-protected region. For such case, return -1 from issignal() and
translate it to corresponding error code in sleepq_catch_signals().
Assert that other consumers of cursig() are not affected by the new
return value. (*)
Micro-optimize, mostly VFS and VOP methods, by avoiding calling the
functions when SIGDEFERSTOP_NOP non-change is requested. (**)
Reported and tested by: pho (*)
Requested by: bde (**)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
TDF_SEINTR flags values, unlike TDF_SBDRY, must be treated almost as
if TDF_SBDRY is not set for STOP signal delivery. The only difference
is that sig_suspend_threads() should abort the sleep instead of doing
immediate suspension.
Reported by: ngie
Sponsored by: The FreeBSD Foundation
MFC after: 12 days
Approved by: re (gjb)
exiting (NOTE_EXIT->knlist_remove_inevent()), two things happen:
- knote kn_knlist pointer is reset
- INFLUX knote is removed from the process knlist.
And, there are two consequences:
- KN_LIST_UNLOCK() on such knote is nop
- there is nothing which would block exit1() from processing past the
knlist_destroy() (and knlist_destroy() resets knlist lock pointers).
Both consequences result either in leaked process lock, or
dereferencing NULL function pointers for locking.
Handle this by stopping embedding the process knlist into struct proc.
Instead, the knlist is allocated together with struct proc, but marked
as autodestroy on the zombie reap, by knlist_detach() function. The
knlist is freed when last kevent is removed from the list, in
particular, at the zombie reap time if the list is empty. As result,
the knlist_remove_inevent() is no longer needed and removed.
Other changes:
In filt_procattach(), clear NOTE_EXEC and NOTE_FORK desired events
from kn_sfflags for knote registered by kernel to only get NOTE_CHILD
notifications. The flags leak resulted in excessive
NOTE_EXEC/NOTE_FORK reports.
Fix immediate note activation in filt_procattach(). Condition should
be either the immediate CHILD_NOTE activation, or immediate NOTE_EXIT
report for the exiting process.
In knote_fork(), do not perform racy check for KN_INFLUX before kq
lock is taken. Besides being racy, it did not accounted for notes
just added by scan (KN_SCAN).
Some minor and incomplete style fixes.
Analyzed and tested by: Eric Badger <eric@badgerio.us>
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D6859
framework allowing to set the suspension policy for the dynamic block.
Extend the currently possible policies of stopping on interruptible
sleeps and ignoring such sleeps by two more: do not suspend at
interruptible sleeps, but interrupt them with either EINTR or ERESTART.
Reviewed by: jilles
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
The allproc_lock lock used in the sysctl_kern_corefile function is initialized
in the procinit function which is called after setting sysctl values at boot.
That means if we set kern.corefile at boot we will be trying to use
lock with is uninitialized and machine will crash.
If we define kern.corefile as tunable instead of using CTFLAG_RWTUN we will
not call the sysctl_kern_corefile function and we will not use an uninitialized
lock. When machine will boot then we will start using function depending on
the lock.
Reviewed by: pjd
Add two new LWPINFO flags: PL_FLAG_BORN and PL_FLAG_EXITED for reporting
thread creation and destruction. Newly created threads will stop to report
PL_FLAG_BORN before returning to userland and exiting threads will stop to
report PL_FLAG_EXIT before exiting completely. Both of these events are
only enabled and reported if PT_LWP_EVENTS is enabled on a process.
- Use SDT_PROBE<N>() instead of SDT_PROBE(). This has no functional effect
at the moment, but will be needed for some future changes.
- Don't hardcode the module component of the probe identifier. This is
set automatically by the SDT framework.
MFC after: 1 week
SDT_PROBE requires 5 parameters whereas SDT_PROBE<n> requires n parameters
where n is typically smaller than 5.
Perhaps SDT_PROBE should be made a private implementation detail.
MFC after: 20 days
As CloudABI processes cannot adjust their signal handlers, we need to
make sure that we start up CloudABI processes with consistent signal
masks. Though the POSIx standard signal behavior is all right, we do
need to make sure that we ignore SIGPIPE, as it would otherwise be
hard to interact with pipes and sockets.
Extend execsigs() to iterate over ps_sigignore and call sigdflt() for
each of the ignored signals.
Reviewed by: kib
Obtained from: https://github.com/NuxiNL/freebsd
Differential Revision: https://reviews.freebsd.org/D3365
SIGCHLD signal, should keep full 32 bits of the status passed to the
_exit(2).
Split the combined p_xstat of the struct proc into the separate exit
status p_xexit for normal process exit, and signalled termination
information p_xsig. Kernel-visible macro KW_EXITCODE() reconstructs
old p_xstat from p_xexit and p_xsig. p_xexit contains complete status
and copied out into si_status.
Requested by: Joerg Schilling
Reviewed by: jilles (previous version), pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
tdsigwakeup() increases the priority of the low-priority threads, to
give them a chance to be terminated timely. Also, kernel allows user
to signal kernel processes. The combined effect is that signalling
idle process bump a priority of the selected delivery thread, which
starts eating CPU.
Check for the delivery thread be an idle thread and do not raise its
priority then.
The signal delivery to the kernel threads must be opt-in feature.
Kernel thread should explicitely declare the ability to handle signals
directed to it. E.g., nfsd threads check for signal as an indication
of exit request.
Most threads do not handle signals at all, and queuing the signal to
them causes odd side-effects. Most innocent consequence is the memory
leak due to queued ksiginfo, which is never deleted from the sigqueue.
Code to prevent even queuing signals to the kernel threads is trivial,
but it requires careful examination of each call to kproc/kthread
creation to decide should the signalling be allowed. The commit is a
stop-gap measure which fixes the immediate case for now.
PR: 200493
Reported and tested by: trasz
Discussed with: trasz, emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Previously format string traversal could happen while the string itself was
being modified.
Use allproc_lock as coredumping is a rare operation and as such we don't
have to create a dedicated lock.
Submitted by: Tiwei Bie <btw mail.ustc.edu.cn>
Reviewed by: kib
X-Additional: JuniorJobs project
in kern_gzio.c. The old gzio interface was somewhat inflexible and has not
worked properly since r272535: currently, the gzio functions are called with
a range lock held on the output vnode, but kern_gzio.c does not pass the
IO_RANGELOCKED flag to vn_rdwr() calls, resulting in deadlock when vn_rdwr()
attempts to reacquire the range lock. Moreover, the new gzio interface can
be used to implement kernel core compression.
This change also modifies the kernel configuration options needed to enable
userland core dump compression support: gzio is now an option rather than a
device, and the COMPRESS_USER_CORES option is removed. Core dump compression
is enabled using the kern.compress_user_cores sysctl/tunable.
Differential Revision: https://reviews.freebsd.org/D1832
Reviewed by: rpaulo
Discussed with: kib
This change implements a notification (via devctl) to userland when
the kernel produces coredumps after a process has crashed.
devd can then run a specific command to produce a human readable crash
report. The command is most usually a helper that runs gdb/lldb
commands on the file/coredump pair. It's possible to use this
functionality for implementing automatic generation of crash reports.
devd(8) will be notified of the full path of the binary that crashed and
the full path of the coredump file.
attachment to the process. Note that the command is not intended to
be a security measure, rather it is an obfuscation feature,
implemented for parity with other operating systems.
Discussed with: jilles, rwatson
Man page fixes by: rwatson
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
== SIG_DFL or SIG_IGN. Sloppy code does not fully initialize struct
sigaction for such cases, and being too demanding in the case of
default handler does not catch anything.
Reported and tested by: Alex Tutubalin <lexa@lexa.ru>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the created file name was cached. Use the flag for core dumps.
Requested by: rpaulo
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
feature is to quisce the system before suspend.
Stop is implemented by reusing the thread_single(9) with the special
mode SINGLE_ALLPROC. SINGLE_ALLPROC differs from the existing
single-threading modes by allowing (requiring) caller to operate on
other process. Interruptible sleeps for !TDF_SBDRY threads are
suspended like SIGSTOP does it, instead of aborting the sleep, like
SINGLE_NO_EXIT, to avoid spurious EINTRs on resume.
Provide debugging sysctl debug.stop_all_proc, which causes total stop
and suspends syncer, while waiting for variable reset for resume. It
is used for debugging; should be removed after the real use of the
interface is added.
In collaboration with: pho
Discussed with: avg
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
method needs pre-reset state of the ps_siginfo to correctly construct
signal frame.
Move sigdflt() call after the sv_sendsig() invocation in postsig().
Simultaneously extract common code from trapsignal() and postsig()
into new helper postsig_done().
Submitted by: rea
MFC after: 1 week
- Do not dump into system files.
- Do not acquire write reference to the mount point where img.core is
written, in the coredump(). The vn_rdwr() calls from ELF imgact
request the write ref from vn_rdwr(). Recursive acqusition of the
write ref deadlocks with the unmount.
- Instead, take the range lock for the whole core file. This prevents
parallel dumping from two processes executing the same image,
converting the useless interleaved dump into sequential dumping,
with second core overwriting the first.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pre-r270321. Namely, the flags are preserved for SIG_DFL and SIG_IGN
dispositions.
Requested and reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
