As we are moving away from portsnap,
let's not recommend it in the manual page.
Reviewed by: bcr (manpages), mat (portmgr)
Differential Revision: https://reviews.freebsd.org/D25847
Update the ng_iface documentation and hooks to reflect the fact that the
node currently only supports IPv4 and v6 packets.
Reviewed by: Lutz Donnerhacke
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25862
As part of onboarding and while listening to Holy Ghost by The Bar-Kays, outline
my mentorship. 0mp is mentor, with allanjude and bcr as co-mentor.
Reviewed by: 0mp, allanjude, bcr
Approved by: 0mp (mentor), allanjude (mentor), bcr (mentor)
Differential Revision: D25855
- In the initial description of si_addr, do not claim that it is
always the faulting instruction.
- For si_addr, document that it is generally set to the PC for
synchronous signals, but that it can be set to the the address of
the faulting memory reference for some signals including SIGSEGV and
SIGBUS. In particular, while SIGSEGV generally sets si_addr to the
faulting memory reference, SIGBUS can vary. On some platforms, some
SIGBUS signals set si_addr to the PC and other SIGBUS signals set
si_addr to the faulting address depending on the specific hardware
exception.
- For si_trapno, synchronous signals should set this to some value.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25777
For purposes of handling hardware error reported via NMIs I need a way to
escape NMI context, being too restrictive to do something significant.
To do it this change introduces new swi_sched() flag SWI_FROMNMI, making
it careful about used KPIs. On platforms allowing IPI sending from NMI
context (x86 for now) it immediately wakes clk_intr_event via new IPI_SWI,
otherwise it works just like SWI_DELAY. To handle the delayed SWIs this
patch calls clk_intr_event on every hardclock() tick.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25754
Currently, force_depend() from rc.subr(8) does not support depending on
scripts outside of /etc/rc.d (like /usr/local/etc/rc.d). The /etc/rc.d path
is hard-coded into force_depend().
MFC after: 1 week
Allow TLS records to be decrypted in the kernel after being received
by a NIC. At a high level this is somewhat similar to software KTLS
for the transmit path except in reverse. Protocols enqueue mbufs
containing encrypted TLS records (or portions of records) into the
tail of a socket buffer and the KTLS layer decrypts those records
before returning them to userland applications. However, there is an
important difference:
- In the transmit case, the socket buffer is always a single "record"
holding a chain of mbufs. Not-yet-encrypted mbufs are marked not
ready (M_NOTREADY) and released to protocols for transmit by marking
mbufs ready once their data is encrypted.
- In the receive case, incoming (encrypted) data appended to the
socket buffer is still a single stream of data from the protocol,
but decrypted TLS records are stored as separate records in the
socket buffer and read individually via recvmsg().
Initially I tried to make this work by marking incoming mbufs as
M_NOTREADY, but there didn't seemed to be a non-gross way to deal with
picking a portion of the mbuf chain and turning it into a new record
in the socket buffer after decrypting the TLS record it contained
(along with prepending a control message). Also, such mbufs would
also need to be "pinned" in some way while they are being decrypted
such that a concurrent sbcut() wouldn't free them out from under the
thread performing decryption.
As such, I settled on the following solution:
- Socket buffers now contain an additional chain of mbufs (sb_mtls,
sb_mtlstail, and sb_tlscc) containing encrypted mbufs appended by
the protocol layer. These mbufs are still marked M_NOTREADY, but
soreceive*() generally don't know about them (except that they will
block waiting for data to be decrypted for a blocking read).
- Each time a new mbuf is appended to this TLS mbuf chain, the socket
buffer peeks at the TLS record header at the head of the chain to
determine the encrypted record's length. If enough data is queued
for the TLS record, the socket is placed on a per-CPU TLS workqueue
(reusing the existing KTLS workqueues and worker threads).
- The worker thread loops over the TLS mbuf chain decrypting records
until it runs out of data. Each record is detached from the TLS
mbuf chain while it is being decrypted to keep the mbufs "pinned".
However, a new sb_dtlscc field tracks the character count of the
detached record and sbcut()/sbdrop() is updated to account for the
detached record. After the record is decrypted, the worker thread
first checks to see if sbcut() dropped the record. If so, it is
freed (can happen when a socket is closed with pending data).
Otherwise, the header and trailer are stripped from the original
mbufs, a control message is created holding the decrypted TLS
header, and the decrypted TLS record is appended to the "normal"
socket buffer chain.
(Side note: the SBCHECK() infrastucture was very useful as I was
able to add assertions there about the TLS chain that caught several
bugs during development.)
Tested by: rmacklem (various versions)
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24628
AVL trees, red-black trees, and others. Weak AVL (wavl) trees are a
recently discovered member of that class. This change replaces
red-black rebalancing with weak AVL rebalancing in the RB tree macros.
Wavl trees sit between AVL and red-black trees in terms of how
strictly balance is enforced. They have the stricter balance of AVL
trees as the tree is built - a wavl tree is an AVL tree until the
first deletion. Once removals start, wavl trees are lazier about
rebalancing than AVL trees, so that removals can be fast, but the
balance of the tree can decay to that of a red-black tree. Subsequent
insertions can push balance back toward the stricter AVL conditions.
Removing a node from a wavl tree never requires more than two
rotations, which is better than either red-black or AVL
trees. Inserting a node into a wavl tree never requires more than two
rotations, which matches red-black and AVL trees. The only
disadvantage of wavl trees to red-black trees is that more insertions
are likely to adjust the tree a bit. That's the cost of keeping the
tree more balanced.
Testing has shown that for the cases where red-black trees do worst,
wavl trees better balance leads to faster lookups, so that if lookups
outnumber insertions by a nontrivial amount, lookup time saved exceeds
the extra cost of balancing.
Reviewed by: alc, gbe, markj
Tested by: pho
Discussed with: emaste
Differential Revision: https://reviews.freebsd.org/D25480
Document that iwm(4) currently doesn't support 802.11n and 802.11ac.
PR: 247874
Submitted by: Charles Ross <cwr at sdf dot org>
Reviewed by: brueffer, markj
Approved by: brueffer
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25666
These routines are similar to crypto_getreq() and crypto_freereq() but
operate on caller-supplied storage instead of allocating crypto
requests from a UMA zone.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25691
initializations.
Relax some overly perscriptive rules against declarations: they may be at the
start of any blocks, even if things aren't super complicated. Allow more
initializations (those that call simple functions, like accessor functions for
newbus are fine). Allow the common idiom of declaring the loop variable in a for
loop.
This tries to codify what common exceptions are today, as well as give
some guidance on when it's best to do these things.
Reviewed by: tsoome, kp, markm, allanjude, jiles, cem, rpokala
(earlier versions: seanc, melifaro, bapt, pjd, bz, pstef, arichards,
jhibits, vangyzen, jmallet, ian, glebius, jhb, dab, adrian,
sef, gnn)
Differential Revision: https://reviews.freebsd.org/D25312
Note: date not bumped because "content" was not changed, just inserted some
missing words.
PR: 248001
Submitted by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 2 weeks
Sponsored by: Klara Inc.
The EIP-97 is a packet processing module found on the ESPRESSObin. This
commit adds a crypto(9) driver for the crypto and hash engine in this
device. An initial skeleton driver that could attach and submit
requests was written by loos and others at Netgate, and the driver was
finished by me.
Support for separate AAD and output buffers will be added in a separate
commit, to simplify merging to stable/12 (where those features don't
exist).
Reviewed by: gnn, jhb
Feedback from: andrew, cem, manu
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D25417
Optionally, alert you if the contents change from the previous backup
PR: 86388
Submitted by: Rob Fairbanks <rob.fx907@gmail.com>, Miroslav Lachman <000.fbsd@quip.cz> (Original Version)
MFC after: 4 weeks
Relnotes: yes
Sponsored by: Klara Inc.
Event: July 2020 Bugathon
Differential Revision: https://reviews.freebsd.org/D25628
With this change, a kernel compiled with "options SCTP_SUPPORT" and
without "options SCTP" supports dynamic loading of the SCTP stack.
Currently sctp.ko cannot be unloaded since some prerequisite teardown
logic is not yet implemented. Attempts to unload the module will return
EOPNOTSUPP.
Discussed with: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21997
This implementation doesn't have any major deviations from the other EFI
ports. I've copied the boilerplate from arm and arm64.
I've tested this with the following boot flows:
OpenSBI (M-mode) -> u-boot (S-mode) -> loader.efi -> FreeBSD
OpenSBI (M-mode) -> u-boot (S-mode) -> boot1.efi -> loader.efi -> FreeBSD
Due to the way that u-boot handles secondary CPUs, OpenSBI >= v0.7 is required,
as the HSM extension is needed to bring them up explicitly. Because of this,
using BBL as the SBI implementation will not be possible. Additionally, there
are a few recent u-boot changes that are required as well, all of which will be
present in the upcoming v2020.07 release.
Looks good: emaste
Differential Revision: https://reviews.freebsd.org/D25135
This fixes Linux gettyname(3), with caveats (see PR).
PR: kern/240767
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25558
- Update the core-secretary role.
- Update the comment to mention that the sorting is done based on FreeBSD
login name
Reported by: bofh (with core-secretary@ hat on)
Reviewed by: bcr
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D25526
dumpon has accepted device names without the prefix ever since r291207.
Since dumpon and savecore are always paired, they ought to accept the same
arguments. Prior to this change, specifying 'dumpdev="da3"' in
/etc/rc.conf, for example, would result in dumpon working just fine but
savecore complaining that "Dump device does not exist".
PR: 247618
Reviewed by: cem, bcr
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25500
Expand the mentioned RFC in the SEE ALSO section
and reference RFC1701 and RFC1702.
PR: 240250
Reviewed by: bcr (mentor)
Approved by: bcr (mentor)
Obtained from: OpenBSD
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D25504
These implementations of the bc and dc programs offer a number of advantages
compared to the current implementations in the FreeBSD base system:
- They do not depend on external large number functions (i.e. no dependency
on OpenSSL or any other large number library)
- They implements all features found in GNU bc/dc (with the exception of
the forking of sub-processes, which the author of this version considers
as a security issue).
- They are significantly faster than the current code in base (more than
2 orders of magnitude in some of my tests, e.g. for 12345^100000).
- They should be fully compatible with all features and the behavior of the
current implementations in FreeBSD (not formally verified).
- They support POSIX message catalogs and come with localized messages in
Chinese, Dutch, English, French, German, Japanese, Polish, Portugueze,
and Russian.
- They offer very detailed man-pages that provide far more information than
the current ones.
The upstream sources contain a large number of tests, which are not
imported with this commit. They could be integrated into our test
framework at a latter time.
Installation of this version is controlled by the option "MK_GH_BC=yes".
This option will be set to yes by default in 13-CURRENT, but will be off
by default in 12-STABLE.
Approved by: imp
Obtained from: https://git.yzena.com/gavin/bc
MFC after: 4 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19982
