ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count. Migrate these to use the new bus_alloc_resource_anywhere() API.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
block. Use it in all the PNP drivers to export either the current PNP
table. For uart, create a custom table and export it using
MODULE_PNP_INFO since it's the only one that matches on function
number.
Differential Review: https://reviews.freebsd.org/D3461
we also know that it "can't fail" given the single-threaded nature of
device enumeration. Go ahead and check it just in case, but add a
comment.
CID: 1009393
Sponsored by: Netflix, Inc
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself. Update all callers to use the return value.
With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.
NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices. Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.
Differential Revision: https://reviews.freebsd.org/D1440
Reviewed by: adrian, bz, gnn
Sponsored by: EMC / Isilon Storage Division
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.
MFC after: 1 month
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.
For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.
Approved by: re (kib)
MFC after: 6 weeks
C-NET(PC) has a cfe at location 1 that has both an odd irq mask (it
matches pc98 machines, so maybe it was a flag for pc98 operation) as
well as a memory map. Since this driver doesn't know how to cope, we
start with cfe2, which is purely an I/O space mapped and that seems to
make it work. I say 'seems' here, because the card I have doesn't
seem to have the right dongle for full testing...
from the softc.
- Rework the watchdog timer to match other NIC drivers:
- Start a timer in fe_init() that runs once a second and checks a counter
in the softc that is identical to the deprecated 'if_timer'.
- Just adjust the softc tx timeout value when sending packets instead of
scheduling the timer.
- Use IFQ_SET_MAXLEN().
Tested by: WATANABE Kazuhiro
- Add a mutex to the softc to protect the softc and device hardware.
- Don't leak bus resources if if_alloc() fails during attach.
- Setup the interrupt handler after calling ether_ifattach().
- Use a private timer to manage the transmit watchdog.
Tested by: WATANABE Kazuhiro CQG00620 of nifty.ne.jp
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
confused with the Credit Card Adapter II and its spawn (which the xe
driver supports). These changes get my card probing and attaching. I
recently won one of these (and a NEC rebadged version) in an lot
auction. The NEC didn't work, so I took it apart and found the
MB86960A chip and then modified if_fe_pccard.c to attach. I can't
test this card further since I have no dongle for this card.
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash. Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.
Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.
Approved by: re (dwhite)
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
address, nor do we need the alignment requirements, so eliminate them.
This likely means that we can now collapse some of the entries as we
have no need of them anymore (they match other entries and were there
only to get the right attr memory offset of the enet addr).
cards work. These changes depend on the expanded funce parsing that
just was committed to pccard_cis.c. In NetBSD the ethernet address
was read out of attr memory directly. We rely on the kernel pccard
parser to pulll this information out of what appears to be an obsolete
funce with the information in it.
# I'm still getting the no rx interrupt sometimes with some hub/switches
# for reasons unknown... But usually only one and only when dhclient
# runs.
aware of any fe based cards that do anything except network (well,
maybe the fujitsu scsi/lan card, but I've only seen two of those on
ebay in the last 3 years).
read the ethernet address from the attribute space hasn't been
implemented. Also add flags for the MBH10302. The flags and maddr
fields will be used when reading from the attribute space...
fe1: <EAGLE Technology NE200 ETHERNET LAN MBH10302 04>
As reported by Sean Shapira. This appears to be working. Eagle used
Fujitsu's vendor number, with a product number of 4 (which is the same
as the vendor number, which is a little suspect). Since there's no
apparent conflict, go ahead and use it.
Submitted by: Sean Shapira
