getlogin_r is specified by POSIX to to take a size_t len, not int. Fix our
version to do the same, bump the symbol version due to ABI change and
provide compat.
This was reported to break compilation of Ruby 2.8.
Some discussion about the necessity of the ABI compat did take place in the
review. While many 64-bit platforms would likely be passing it in a 64-bit
register and zero-extended and thus, not notice ABI breakage, some do
sign-extend (e.g. mips).
PR: 247102
Submitted by: Bertram Scharpf <software@bertram-scharpf.de> (original)
Submitted by: cem (ABI compat)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26335
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
For libc regcomp, this will be a nop. libregex will take this to mean that
it needs to turn off GNU extensions, effectively switching it back to the
POSIX-compliant libc implementation at runtime.
pthread_get_name_np() and pthread_set_name_np().
This re-applies r361770 after compatibility fixes.
Reviewed by: antoine, jkim, markj
Tested by: antoine (exp-run)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
for pthread_get_name_np() and pthread_set_name_np(), to be
compatible with Linux.
PR: 238404
Proposed and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
Lot of third-party Linux code uses #include <malloc.h>, expecting to
find the malloc extensions there. Instead of trying to fight them,
accept that attempt to deprecate the header causes more troubles than
solves potential portability issues, and provide our jemalloc
extensions.
PR: 155429
Reviewed by: imp, jhibbits, dab, hselasky, philip, emaste, jilles
Exp-run by: antoine (PR 245366)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D24297
Do not include stdbool.h, it makes the header incompatible with some
third-party code that typedefs bool manually.
Remove inclusion of strings.h, which typically conflicts with the use
of symbol 'index'.
Separate inclusion of sys/cdefs.h is not needed because sys/types.h
already handles that.
Exp-run by: antoine (PR 245366)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24297
close_range(min, max, flags) allows for a range of descriptors to be
closed. The Python folk have indicated that they would much prefer this
interface to closefrom(2), as the case may be that they/someone have special
fds dup'd to higher in the range and they can't necessarily closefrom(min)
because they don't want to hit the upper range, but relocating them to lower
isn't necessarily feasible.
sys_closefrom has been rewritten to use kern_close_range() using ~0U to
indicate closing to the end of the range. This was chosen rather than
requiring callers of kern_close_range() to hold FILEDESC_SLOCK across the
call to kern_close_range for simplicity.
The flags argument of close_range(2) is currently unused, so any flags set
is currently EINVAL. It was added to the interface in Linux so that future
flags could be added for, e.g., "halt on first error" and things of this
nature.
This patch is based on a syscall of the same design that is expected to be
merged into Linux.
Reviewed by: kib, markj, vangyzen (all slightly earlier revisions)
Differential Revision: https://reviews.freebsd.org/D21627
This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .
This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.
Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.
New KPI:
struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.
Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.
Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:
int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.
Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.
Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.
More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232
Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232
utilities so that they will compile with -fno-common.
Started by: Kyle Evans (kevans)
Reviewed by: Kyle Evans (kevans)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24210
Headers are placed in the -development package via install args in rules
in share/mk/bsd.incs.mk; there is no need to explicitly modify TAGS in
include/Makefile. (Mentioned in review D24139.)
Discussed with: manu
The function allows to peek at the thread exit status and even see
return value, without joining (and thus finally destroying) the target
thread.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D23676
Among the same justification as the other stdio _unlocked; in addition to an
inline version in <stdio.h>, we must provide a function in libc as well for
the functionality. This fixes the lang/gcc* builds, which want to use the
symbol from libc.
PR: 243810
Reported by: antoine, swills, Michael <michael.adm gmail com>
X-MFC-With: r357284
rand(3)'s standard C API is extremely limiting, but we can do better
than the historical 32-bit state Park-Miller LCG we've shipped since
2001: r73156.
The justification provided at the time for not using random(3) was that
rand_r(3) could not be made to use the same algorithm. That is still
true. However, the irrelevance of rand_r(3) is increasingly obvious.
Since that time, POSIX has marked the interface obsolescent. rand_r(3)
never became part of the standard C library. If not for API
compatibility reasons, I would just remove rand_r(3) entirely.
So, I do not believe it is a problem for rand_r(3) and rand(3) to
diverge.
The 12 ABI is maintained with compatibility definitions, but this
revision does subtly change the API of rand(3). The sequences of
pseudorandom numbers produced in programs built against new versions of
libc will differ from programs built against prior versions of libc.
Reviewed by: kevans, markm
MFC after: no
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23290
fflush_unlocked is currently desired in ports by sysutils/metalog, and
redefined as the locked fflush.
fputc_unlocked, fputs_unlocked, fread_unlocked, and fwrite_unlocked are
currently desired in ports by devel/elfutils, and redefined as the locked
fputs, fread, and fwrite respectively.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23336
to port software written for Linux variant of qsort_r(3).
Reviewed by: kib, arichardson
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23174
And remove the inline/deprecated attribute use entirely in stdlib.h, from
r355747. The intent was to provide a buildable API transitionary period, but
clearly that was counter-productive.
Reported by: delphij, imp, others
The legacy version of GCC4 currently in base does not support the
parameterized form of this function attribute, as recent introduced in
stdlib.h (r355747).
As we have done for other function attributes with similar compatibility
problems, add a version-compatibile definition in sys/cdefs.h. Note that
Clang defines itself to be GCC 4, so one must check for __clang__ in
addition to __GNUC__ version. On legacy GCC 4, the macro expands to just
the __deprecated__ attribute; on modern GCC or Clang, the macro expands to
the parameterized variant with the message.
Ignoring legacy or unsupported compilers, the macro is also beneficial in
that it is a bit more ergonomic than the full
__attribute__((__deprecated__())) boilerplate.
Reported by: CI (but not tinderbox); imp and others
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D22817
It serves no useful purpose and wasn't as popular as its equally meritless
cousin, srandomdev(3).
Setting aside the problems with rand(3) in general, the problem with this
interface is that the seed isn't shared with the caller (other than by
attacking the output of the generator, which is trivial, but not a hallmark of
pleasant API design). The (arguable) utility of rand(3) or random(3) is as a
semi-fast simulation generator which produces consistent results from a given
seed. These are mutually at odd. Furthermore, sometimes people got the
mistaken impression that a high quality random seed meant a weak generator like
rand(3) or random(3) could be used for things like cryptographic key
generation. This is absolutely not so.
The API was never part of a standard and was not widely used in tree. Existing
in-tree uses have all been removed.
Possible replacement in out of tree codebases:
char buf[3];
time_t t;
time(t);
strftime(buf, sizeof(buf), "%S", gmtime(&t));
srand(atoi(buf));
Relnotes: yes
These functions (sigandset, sigisemptyset, sigorset) are commonly available
in at least musl libc and glibc; sigorset, at least, has proven quite useful
in qemu-bsd-user work for tracking the current process signal mask in a more
self-documenting/aesthetically pleasing manner.
Reviewed by: bapt, jilles, pfg
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22187
Summary:
In rS338751, the check to declare `timespec_get()` for C++17 and higher
was incorrectly done against a `cplusplus` define, while it should have
been `__cplusplus`.
Fix this by using `__cplusplus`, and also bump `__FreeBSD_version` so it
becomes possible to correctly check for `timespec_get()` in upstream
libc++ headers.
Reviewed by: brooks, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D22735
gets is unsafe and shouldn't be used (for many years now). Leave it in
the existing symbol version so anything that previously linked aginst it
still runs, but do not allow new software to link against it.
(The compatability/legacy implementation must not be static so that
the symbol and in particular the compat sym gets@FBSD_1.0 make it
into libc.)
PR: 222796 (exp-run)
Reported by: Paul Vixie
Reviewed by: allanjude, cy, eadler, gnn, jhb, kib, ngie (some earlier)
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12298
Since YP protocol definition uses the constant to declare
variable-size opaque byte strings, the change should be binary
compatible with existing installations which do not expose keys or
values larger than 1024 bytes.
All uses of local variables with YPMAXRECORD sizes were removed to
avoid insane stack use. On the other hand, variables with static
lifetime should be fine and only result in increased VA use.
Glibc made same change, increasing the allowed length for keys and
values in YP to 16M, in 2013.
Reviewed by: markj
Discussed with: ian
Sponsored by: Mellanox Technologies
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D20900
This is a variant of mkostemps() which takes a directory descriptor and
returns a descriptor for a tempfile relative to that directory. Unlike
the other mktemp functions, mkostempsat() can be used in capability
mode.
Reviewed by: cem
Discussed with: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21031
copy_file_range(2) is a Linux compatible syscall created by r350315.
Reviewed by: kib, asomers
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20584
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
ioctl definitions and related datatypes that allow userland control of pwm
hardware via the pwmc device. The new name and location better reflects its
assocation with a single device driver.
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
Error messages in gai_strerror(3) vary largely among OSs.
For new software we largely replaced the obsoleted EAI_NONAME and
with EAI_NODATA but we never updated the corresponding message to better
match the intended use. We also have references to ai_flags and ai_family
which are not very descriptive for non-developer end users.
Bring new new error messages based on informational RFC 3493, which has
obsoleted RFC 2553, and make them consistent among the header adn
manpage.
MFC after: 1 month
Differentical Revision: D18630
NL_ARGMAX is the maximum number of positional arguments supported by
printf(3). Prior to r308145 it was declared as 99 and not enforced.
r308145 added enforcement and increased the value to 64k.
Unfortunately, development versions of PostgreSQL used the system
definition to allocate and zero an NL_ARGMAX * 4 sized array on the
stack of its snprintf implementation with measurable performance
impacts. This has been fixed in new PostgreSQL versions, but it is
possible that other programs suffer from this problem.
A value of 4096 puts us on par with Linux and is certainly large enough
for any reasonable program.
Reviewed by: mjg
Reported by: mjg
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D17387
Differential revision: https://reviews.freebsd.org/D8286
