Commit Graph

107448 Commits

Author SHA1 Message Date
andrew
e4b0c28166 Move reloc.c to the top level Makefile as it has become generic. 2015-04-11 10:21:26 +00:00
andrew
968170bb2a Update the arm efi ldscript to generate a valid efi binary 2015-04-11 10:07:58 +00:00
ganbold
c2d0c65e7a This modifies several FreeBSD drivers to use the GNU approach to
supply clk81 information.  It also changes the hardware strings
in some of the drivers to match what's present in the GNU files.

Submitted by:  John Wehle
Reviewed by:   imp
2015-04-11 08:34:41 +00:00
ganbold
2c7cd4307b This modifies several FreeBSD drivers to use the hardware strings
present in the GNU dts files.

Submitted by:  John Wehle
Reviewed by:   imp
2015-04-11 08:30:37 +00:00
ganbold
3d8067d548 This modifies the FreeBSD Amlogic DTS files to use the GNU files
as the base.

Submitted by:	John Wehle
Reviewed by:	imp
2015-04-11 08:27:38 +00:00
ganbold
436ddce665 The GNU files don't include a DTS for the aml8726-m8b (which has
cortex-a5 cores unlike the aml8726-m8 which has cortex-a9 cores).

Submitted by:	John Wehle
Reviewed by:	imp
2015-04-11 08:25:53 +00:00
ganbold
759dedc691 The GNU Amlogic DTS files have some errors (e.g. bad register
address, bad IRQ, etc) which are fixed by this patch.

John has sent these changes to the author of the files who said
he'll propagate the changes further upstream.

Submitted by:	John Wehle
Reviewed by:	imp
2015-04-11 08:17:39 +00:00
rpaulo
692e8bf361 netmap: improve the netmap attach message on FreeBSD.
MFC after:	1 week
2015-04-11 06:20:46 +00:00
jkim
94f110f313 Merge ACPICA 20150410. 2015-04-11 03:23:41 +00:00
delphij
34b5443a48 Attempt to fix build after 281351 by defining full prototype for the
functions that were moved to ip_reass.c.
2015-04-11 01:06:59 +00:00
delphij
1d2768112d Merge changes from vendor driver version 1.1.1:
v1.1.1 2015-03-26
 * Support 4Kn drive.
 * Change the SCSI target ID of the disk to be the index of physical
   connetion to the HBA.
 * Support staggered drive spin up.
 * Fix a bug that command would be timeout because of improper
   interrupt service routine.
 * Error handling to avoid scsi command lost which caused system
   hang up.
 * Fix a bug that fail to get the devcie's serial number via
   FreeNAS WebGUI.

Many thanks to HighPoint for continued support of FreeBSD!

MFC after:	2 weeks
2015-04-11 00:45:03 +00:00
eadler
0a3f7d0390 iwn, wlan: fix typos
Fxi tow typos

Obtained from:	DragonFlyBSD
MFC after:	3 days
2015-04-10 20:55:17 +00:00
emaste
f81c3bc31e Use explicitly sized types in EFI module metadata
This will allow the same metadata struct to be used on all platforms.

Differential Revision:	https://reviews.freebsd.org/D2275
Reviewed by:	jhb
2015-04-10 19:26:45 +00:00
ae
77d9811f99 Fix the IPV6_MULTICAST_IF sockopt handling. RFC 3493 says when the
interface index is specified as zero, the system should select the
interface to use for outgoing multicast packets. Even the comment
for the in6p_set_multicast_if() function says about index of zero.
But in fact for zero index the function just returns EADDRNOTAVAIL.

I.e. if you first set some interface and then will try reset it
with zero ifindex, you will get EADDRNOTAVAIL.

Reset im6o_multicast_ifp to NULL when interface index specified as
zero. Also return EINVAL in case when ifnet_byindex() returns NULL.
This will be the same behaviour as when ifindex is bigger than
V_if_index. And return EADDRNOTAVAIL only when interface is not
multicast capable.

Reported by:	Olivier Cochard-Labbé
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2015-04-10 19:09:51 +00:00
will
e2c616f11c tmpfs_getattr(): Return more correct allocated byte counts.
For VREG vnodes, return the resident page count (multiplied by PAGE_SIZE)
for the tmpfs node's anonymous VM object that stores actual file contents.

For all other vnodes, return the tmpfs_node's tn_size, which should not
be rounded to a page.

This change allows using stat(2) to identify a sparse file on tmpfs.

Reviewed by:	kib
MFC after:	1 week
2015-04-10 19:04:39 +00:00
emaste
d03e11cb10 Add build support for i386 loader.efi
Kernel changes are required for this to be useful but this will allow
others to experiment.

Differential Revision:	https://reviews.freebsd.org/D2276
2015-04-10 18:49:43 +00:00
emaste
ee55ee8e46 Limit EFI framebuffer metadata to amd64 for now
The i386 loader.efi does not yet exist. Avoid dealing with vt and
framebuffer issues there until the initial bootstrapping is done.
2015-04-10 18:08:09 +00:00
ian
ef72b39e7d Use OF_getencpropalloc() to handle endianess of the properties.
Submitted by:	Michal Meloun
2015-04-10 13:50:57 +00:00
ian
8e7c521fdb Add a pmap_kremove_device() to undo mappings made with pmap_kenter_device().
Previously we used pmap_kremove(), but with ARM_NEW_PMAP it does the remove
in a way that isn't SMP-coherent (which is appropriate in some circumstances
such as mapping/unmapping sf buffers).  With matching enter/remove routines
for device mappings, each low-level implementation can do the right thing.

Reviewed by:	Svatopluk Kraus <onwahe@gmail.com>
2015-04-10 13:26:35 +00:00
ian
5b36d2f7ec The "get latency" and "get bitmode" device commands are read operations,
not writes.
2015-04-10 13:20:31 +00:00
glebius
50ede929e1 Redo r274966. Instead of global all-interface all-vnet undocumented sysctl,
use per-interface flag, and document it.

Sponsored by:	Nginx, Inc.
2015-04-10 09:50:13 +00:00
andrew
469a6f6d98 Port the EFI reloc codeto work on arm64. This used the rela relocation
table so wiill need the addend included in the relocation calculation.

Sponsored by:	The FreeBSD Foundation
2015-04-10 09:15:35 +00:00
glebius
662cdec164 UMA zone limit can be lowered, so remove protection against from
the sysctl_handle_uma_zone_max().

Sponsored by:	Nginx, Inc.
2015-04-10 06:56:49 +00:00
glebius
d2eb1d4ad8 o Use Jenkins hash. With previous hash, for a single source IP address and
sequential IP ID case (e.g. ping -f), distribution fell into 8-10 buckets
  out of 64. With Jenkins hash, distribution is even.
o Add random seed to the hash.

Sponsored by:	Nginx, Inc.
2015-04-10 06:55:43 +00:00
glebius
a0f9f3c303 Move all code related to IP fragment reassembly to ip_reass.c. Some
function names have changed and comments are reformatted or added, but
there is no functional change.

Claim copyright for me and Adrian.

Sponsored by:	Nginx, Inc.
2015-04-10 06:02:37 +00:00
glebius
1f2f31e87d Now that IP reassembly is no longer under single lock, book-keeping amount
of allocations in V_nipq is racy.  To fix that, we would simply stop doing
book-keeping ourselves, and rely on UMA doing that.  There could be a
slight overcommit due to caches, but that isn't a big deal.

o V_nipq and V_maxnipq go away.
o net.inet.ip.fragpackets is now just SYSCTL_UMA_CUR()
o net.inet.ip.maxfragpackets could have been just SYSCTL_UMA_MAX(), but
  historically it has special semantics about values of 0 and -1, so
  provide sysctl_maxfragpackets() to handle these special cases.
o If zone limit lowers either due to net.inet.ip.maxfragpackets or due to
  kern.ipc.nmbclusters, then new function ipq_drain_tomax() goes over
  buckets and frees the oldest packets until we are in the limit.
  The code that (incorrectly) did that in ip_slowtimo() is removed.
o ip_reass() doesn't check any limits and calls uma_zalloc(M_NOWAIT).
  If it fails, a new function ipq_reuse() is called. This function will
  find the oldest packet in the currently locked bucket, and if there is
  none, it will search in other buckets until success.

Sponsored by:	Nginx, Inc.
2015-04-09 22:13:27 +00:00
marius
4bb707efc4 Don't enable RX and TX before their initial configuration is done, i. e.
after setting up interrupt moderation but before turning interrupts on.
This matches what Realtek's r8168 Linux driver does as of version 8.039.00
and fixes problems with certain incarnations of certain MAC revisions
like the interface requiring an extra up/down-cycle after boot to start
working or DMA configuration not being adhered to.

PR:		193743, 197535
MFC after:	1 week
2015-04-09 21:35:44 +00:00
glebius
8685b42463 In the ip_reass() do packet examination and adjusting before acquiring
locks and doing lookups.

Sponsored by:	Nginx, Inc.
2015-04-09 21:32:32 +00:00
glebius
a68631b0e4 Make ip reassembly queue mutexes per-vnet, putting them into the structure
that they protect.

Sponsored by:	Nginx, Inc.
2015-04-09 21:17:07 +00:00
emaste
679bd6c93b Remove EOL whitespace from i386 EFI loader source 2015-04-09 19:48:42 +00:00
gnn
a54f0e733c Revert 281276 as unnecessary. Proper change to be committed
to the base polling code in a subsequent commit.

Pointed out by: glebius

Sponsored by:	Rubicon Communications (NetGate)
2015-04-09 14:44:30 +00:00
mav
2e38078077 Remove sleeps from geom_up thread on device destruction.
MFC after:	3 days.
2015-04-09 13:09:05 +00:00
ae
1af0fcc87b Fix the check for maximum mbuf's size needed to send ND6 NA and NS.
It is acceptable that the size can be equal to MCLBYTES. In the later
KAME's code this check has been moved under DIAGNOSTIC ifdef, because
the size of NA and NS is much smaller than MCLBYTES. So, it is safe to
replace the check with KASSERT.

PR:		199304
Discussed with:	glebius
MFC after:	1 week
2015-04-09 12:57:58 +00:00
andrew
3a75ccf5ce Add R_AARCH64_NONE, the null relocation. 2015-04-09 10:28:05 +00:00
andrew
353f0f11dd Print error values with hex to make it easier to find the EFI error type. 2015-04-09 10:15:47 +00:00
andrew
9045097370 Only use -fPIC when building boot1.efi for x86.
Sponsored by:	The FreeBSD Foundation
2015-04-09 10:08:10 +00:00
andrew
5c9a4966dd Add the arm64 machine dependent parts of ficl. This is not machine
dependent, as most copies of these files are identical, but unfortunately
this is still needed.

Sponsored by:	The FreeBSD Foundation
2015-04-09 10:00:26 +00:00
glebius
977624bc79 Use TAILQ_FOREACH_SAFE() instead of implementing it ourselves.
Sponsored by:	Nginx, Inc.
2015-04-09 09:00:32 +00:00
glebius
03afa52780 If V_maxnipq is set to zero, drain the queue here and now, instead of
relying on timeouts.

Sponsored by:	Nginx, Inc.
2015-04-09 08:56:23 +00:00
glebius
ddd581998f o Since we always update either fragdrop or fragtimeout stat counter when we
free a fragment, provide two inline functions that do that for us:
  ipq_drop() and ipq_timeout().
o Rename ip_free_f() to ipq_free() to match the name scheme of IP reassembly.
o Remove assertion from ipq_free(), since it requires extra argument to be
  passed, but locking scheme is simple enough and function is static.

Sponsored by:	Nginx, Inc.
2015-04-09 08:52:02 +00:00
glebius
89392dc82f Rename ip_drain_locked() to ip_drain_vnet(), since the function differs
from ip_drain() not in locking, but in the scope of its work.

Sponsored by:	Nginx, Inc.
2015-04-09 08:37:16 +00:00
adrian
bca1fef7fe Do not access peripheral before clock stabilization.
Tested:

* Intel 3945ABG NIC, STA mode

PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-04-09 04:56:24 +00:00
adrian
5cabee2fa7 Fix buffer overflow introduced in previous commits (unbreaks 802.11a capable NICs).
Tested:

* PCIe Intel 3945ABG NIC

PR:		kern/197143
Submitted by:	 Andriy Voskoboinyk <s3erios@gmail.com>
2015-04-09 04:51:39 +00:00
jimharris
8ae9141498 nvme: use BUS_SPACE_MAXSIZE for bus_dma_tag_create maxsize parameter
This fixes i386 PAE build fallout from r281281.

Reported by:	bz
MFC after:	1 week
2015-04-09 00:37:55 +00:00
jimharris
e60358657f nvme: remove CHATHAM related code
Chatham was an internal NVMe prototype board used for
early driver development.

MFC after:	1 week
Sponsored by:	Intel
2015-04-08 21:52:06 +00:00
jimharris
eef38a1316 nvme: add device strings for Intel DC series NVMe SSDs
MFC after:	1 week
Sponsored by:	Intel
2015-04-08 21:50:45 +00:00
jimharris
f54beeaff1 nvme: create separate DMA tag for non-payload DMA buffers
Submission and completion queue memory need to use a
separate DMA tag for mappings than payload buffers,
to ensure mappings remain contiguous even with DMAR
enabled.

Submitted by:	kib
MFC after:	1 week
Sponsored by:	Intel
2015-04-08 21:49:45 +00:00
jimharris
d87d9c87c8 nvme: fall back to a smaller MSI-X vector allocation if necessary
Previously, if per-CPU MSI-X vectors could not be allocated,
nvme(4) would fall back to INTx with a single I/O queue pair.
This change will still fall back to a single I/O queue pair, but
allocate MSI-X vectors instead of reverting to INTx.

MFC after:	1 week
Sponsored by:	Intel
2015-04-08 21:46:18 +00:00
gnn
468eb00d1f Add support for a netisr polling tunable, which allows run time switching of
device polling rather than having it only be controlled by the compile
time option.

Summary: Rubicon Communications (Netgate)

Reviewers: #network, hiren

Reviewed By: #network, hiren

Subscribers: hiren

Differential Revision: https://reviews.freebsd.org/D2258
2015-04-08 20:25:51 +00:00
dteske
3de33e9ea5 Re-do proper mode-endings. Antithesis of r281176-281179 which reverted
earlier migration away from sloppy mode-endings (r280925,280974-280976)
due to a red-herring in diagnosing HardenedBSD boot lockup.

Thanks to:	lattera (shawn.webb@hardenedbsd<dot>org)
MFC after:	3 days
X-MFC-to:	stable/10
X-MFC-with:	r280925,280974-280976,281176-281179
2015-04-08 20:10:42 +00:00