The code originate in NetBSD and there are the copyright notes have been
assigned to the NetBSD Foundation. Update the files up to the point where
we started diverging.
Further relaxation of the licensing terms are possible after we
check the NetBSD updates, and contact the local authors.
In the case of ccdconfig.8 this reinstates the 3rd clause but since the
code is not directly from Berkeley, the change was bogus.
Obtained from: NetBSD
After consultation with SPDX experts and their matching guidelines[1],
the licensing doesn't exactly match the BSD-2-Clause. It yet remains to be
determined if they are equivalent or if there is a recognized license that
matches but it is safer to just revert the tags.
Let this also be a reminder that on FreeBSD, SPDX tags are only advisory
and have no legal value (but IANAL).
Pointyhat to: pfg
Thanks to: Rodney Grimes, Gary O'Neall
[1] https://spdx.org/spdx-license-list/matching-guidelines
- Updates tables in affected files with new entries from newer spec
revisions of SFF-8472, SFF-8024, and SFF-8636
- Change ifconfig to read and display the extended compliance code for
SFP media if the extended compliance code is not 0. This was being displayed
for QSFP transceivers only, but SFP28 media uses this to report 25G
capability.
Reviewed by: melifaro, sbruno
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D13286
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
This is similar to the TCP case. where a TCP RST segment can be sent.
There is one limitation: When sending an ABORT in response to an incoming
packet, it should be tested if there is no ABORT chunk in the received
packet. Currently, it is only checked if the first chunk is an ABORT
chunk to avoid parsing the whole packet, which could result in a DOS attack.
Thanks to Timo Voelker for helping me to test this patch.
Reviewed by: bcr@ (man page part), ae@ (generic, non-SCTP part)
Differential Revision: https://reviews.freebsd.org/D13239
S_vmtotal:
Use unsigned format to print unsigned memory counters from struct
vmtotal.
Remove unneeded cast, style locals declarations.
S_efi_map:
Make printing of the memory regions descriptions less MD by
using uintmax_t formats.
Noted by and discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
ZAC (Zoned-device ATA Command set) is the standard for addressing SMR
(shingled magnetic recording) devices over SATA. Drives indicate their
support for ZAC in their IDENTIFY block. Print whether and how a drive
supports ZAC in the output of "camcontrol identify".
Reviewed by: ken, imp
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13171
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
1200046, the first version that supports this feature. If we set it,
then use an old kernel, we'll break the 'contract' of having
checksummed cylinder groups this flag signifies. To avoid creating
something with an inconsistent state, don't turn the flag on in these
cases. The first full fsck with a new kernel will turn this on.
Spnsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13114
Creating a UFS filesystem with a newfs newer than the running kernel,
and then mounting that filesystem, can lead to interesting failures.
Add a safety belt to explicitly warn when newfs is newer than the
running kernel.
Reviewed by: gjb, jhb, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12765
The route_host parsing code set the interface name, but only for the first
node_host in the list. If that one happened to be the inet6 address and the
rule wanted an inet address it'd get removed by remove_invalid_hosts() later
on, and we'd have no interface name.
We must set the interface name for all node_host entries in the list, not just
the first one.
PR: 223208
MFC after: 2 weeks
dhclient(8) is chrooted so opening /dev/null always will fail.
In capability world this is also annoying because we getting error that
open(2) is not permitted in Capsicum. dhclient(8) is closing stdio by
precaching fd to /dev/null before chroot.
This is done few lines below daemon(3) function so let's not try to do that
in daemon(3) function.
Reviewed by: cem@
Differential Revision: https://reviews.freebsd.org/D12826
dhclient(8) is failing during boot to connect to the syslog service, because
syslog daemon is started after dhclient(8). This can be reproduced by stooping
syslog daemon and ktrace the dhclient or use kern.trap_enotcap sysctl and boot
the machine. Using the Casper syslog service fix the problem.
Reviewed by: bapt@
Differential Revision: https://reviews.freebsd.org/D12825
function, so check if cap_chanel_t is NULL is not enough.
Casper with a normal libc will still fail in capability mote so let's not
enter capability mode without casper support when we need to resolve DNS.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D12823
boot for the received packets.
The rcv_tstmp field overlaps the place of Ln header length indicators,
not used by received packets. The basic pkthdr rearrangement change
in sys/mbuf.h was provided by gallatin.
There are two accompanying M_ flags: M_TSTMP means that there is the
timestamp (and it was generated by hardware).
Another flag M_TSTMP_HPREC indicates that the timestamp is
high-precision. Practically M_TSTMP_HPREC means that hardware
provided additional precision comparing with the stamps when the flag
is not set. E.g., for ConnectX all packets are stamped by hardware
when PCIe transaction to write out the completion descriptor is
performed, but PTP packet are stamped on port. For Intel cards, when
PTP assist is enabled, only PTP packets are stamped in the limited
number of registers, so if Intel cards ever start support this
mechanism, they would always set M_TSTMP | M_TSTMP_HPREC if hardware
timestamp is present for the given packet.
Add IFCAP_HWRXTSTMP interface capability to indicate the support for
hardware rx timestamping, and ifconfig(8) command to toggle it.
Based on the patch by: gallatin
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks (? mbuf KBI issue)
X-Differential revision: https://reviews.freebsd.org/D12638
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated. Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.
Discussed with: bde (who does not like the removal)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
We don't need to check if casper is present, this is done in the library itself.
Reviewed by: emaste, cem, ed
Differential Revision: https://reviews.freebsd.org/D8754
When -c is specified, the system will be power cycled if the
underlying hardware supports it. Otherwise the system will be halted
or rebooted depending on which command was used.
Sponsored by: Netflix
Printing the entire log page is causing confusion over available
slots. Report only those slots that are valid. In the case where the
firmware download isn't supported, assume that only the first slot is
valid (I have no hardware to test this assumption though)
Sponsored by: Netflix
When using a kernel built with the GZIO config option, dumpon -z can be
used to configure gzip compression using the in-kernel copy of zlib.
This is useful on systems with large amounts of RAM, which require a
correspondingly large dump device. Recovery of compressed dumps is also
faster since fewer bytes need to be copied from the dump device.
Because we have no way of knowing the final size of a compressed dump
until it is written, the kernel will always attempt to dump when
compression is configured, regardless of the dump device size. If the
dump is aborted because we run out of space, an error is reported on
the console.
savecore(8) is modified to handle compressed dumps and save them to
vmcore.<index>.gz, as it does when given the -z option.
A new rc.conf variable, dumpon_flags, is added. Its value is added to
the boot-time dumpon(8) invocation that occurs when a dump device is
configured in rc.conf.
Reviewed by: cem (earlier version)
Discussed with: def, rgrimes
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11723
The build was broken on GCC-using architectures with:
growfs.c: In function 'cgckhash':
growfs.c:1753: warning: old-style function definition
Sponsored by: The FreeBSD Foundation
