Commit Graph

2765 Commits

Author SHA1 Message Date
glebius
fb9b0b1cbe Add macro IF_DEQUEUE_ALL(ifq, m), that takes the entire mbuf chain off
the queue. It can be utilized in queue processing to avoid multiple
locking/unlocking.
2011-10-27 09:45:12 +00:00
qingli
9ae130094e The host-id/interface-id can have a specific value and is properly
masked out when adding a prefix route through the "route" command.
However, when deleting the route, simply changing the command keyword
from "add" to "delete" does not work. The failoure is observed in
both IPv4 and IPv6 route insertion. The patch makes the route command
behavior consistent between the "add" and the "delete" operation.

MFC after:	1 week
2011-10-25 00:34:39 +00:00
ed
b18bd1101c Add missing #includes.
According to POSIX, these two header files should be able to be included
by themselves, not depending on other headers. The <net/if.h> header
uses struct sockaddr when __BSD_VISIBLE=1, while <netinet/tcp.h> uses
integer datatypes (u_int32_t, u_short, etc).

MFC after:	2 months
2011-10-21 12:58:34 +00:00
ed
832b15d289 Get rid of D_PSEUDO.
It seems the D_PSEUDO flag was meant to allow make_dev() to return NULL.
Nowadays we have a different interface for that; make_dev_p(). There's
no need to keep it there.

While there, remove an unneeded D_NEEDMINOR from the gpio driver.

Discussed with:	gonzo@ (gpio)
2011-10-18 08:09:44 +00:00
bz
a13ffdabcc Pass the fibnum where we need filtering of the message on the
rtsock allowing routing daemons to filter routing updates on an
rtsock per FIB.

Adjust raw_input() and split it into wrapper and a new function
taking an optional callback argument even though we only have one
consumer [1] to keep the hackish flags local to rtsock.c.

PR:		kern/134931
Submitted by:	multiple (see PR)
Suggested by:	rwatson [1]
Reviewed by:	rwatson
MFC after:	3 days
2011-09-28 13:48:36 +00:00
kmacy
e3079e1350 Make KBI changes required for future MFCing of inpcb rtentry / llentry caching.
Reviewed by:	rwatson, bz
Approved by:	re (kib)
2011-09-20 20:27:26 +00:00
kmacy
99851f359e In order to maximize the re-usability of kernel code in user space this
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.

Reviewed by:	rwatson
Approved by:	re (bz)
2011-09-16 13:58:51 +00:00
thompsa
cb24e9343d On the first loop for generating a bridge MAC address use the local
hostid, this gives a good chance of keeping the same address over
reboots. This is intended to help IPV6 and similar which generate
their addresses from the mac.

PR:		kern/160300
Submitted by:	mdodd
Approved by:	re (kib)
2011-09-04 22:06:32 +00:00
bz
75529036c4 When adding IPv6 fwd support to ipfw in r225044 these two files were
not committed.  Initialize next_hop6 to align with the IPv4 code.

PR:		bin/117214
MFC after:	3 weeks
X-MFC with:	r225044
Approved by:	re (kib)
2011-08-27 08:49:55 +00:00
attilio
683d7a54ce Fix a deficiency in the selinfo interface:
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.

That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.

Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.

Sponsored by:	Sandvine Incorporated
Reported by:	rstone
Tested by:	pluknet
Reviewed by:	jhb, kib
Approved by:	re (bz)
MFC after:	3 weeks
2011-08-25 15:51:54 +00:00
qingli
631a8abdff When the RADIX_MPATH kernel option is enabled, the RADIX_MPATH code tries
to find the first route node of an ECMP chain before executing the route
command. If the system has a default route, and the specific route argument
to the command does not exist in the routing table, then the default route
would be reached. The current code does not verify the reached node matches
the given route argument, therefore erroneous removed the entry. This patch
fixes that bug.

Approved by:	re
MFC after:	3 days
2011-08-25 04:31:20 +00:00
kevlo
c7105822b4 In rtinit1(), before rtrequest1_fib() is called, info.rti_flags is
initialized by flags (function argument) or-ed with ifa->ifa_flags.
If both NIC has a loopback route to itself, so IFA_RTSELF is set on ifa(s).
As IFA_RTSELF is defined by RTF_HOST, rtrequest1_fib() is called with
RTF_HOST flag even if netmask is not NULL. Consequently, netmask is set
to zero in rtrequest1_fib(), and request to add network route is changed
under hands to request to add host route.

Tested by:	Andrew Boyer <aboyer at averesystems.com>
Submitted by:	Svatopluk Kraus <onwahe at gmail dot com>
Approved by:	re (hrs)
2011-08-08 05:25:51 +00:00
pluknet
957e60f904 Add missing MODULE_VERSION() definition to protect against duplicating
module loads.

PR:		kern/159345
Reported by:	Eugene Grosbein <egrosbein att rdtc ru>
Tested by:	Eugene Grosbein <egrosbein att rdtc ru>
Approved by:	re (kib)
MFC after:	1 week
2011-08-01 11:24:55 +00:00
bz
352be4e985 Add spares to the network stack for FreeBSD-9:
- TCP keep* timers
- TCP UTO (adjust from what was there already)
- netmap
- route caching
- user cookie (temporary to allow for the real fix)

Slightly re-shuffle struct ifnet moving fields out of the middle
of spares and to better align.

Discussed with:	rwatson (slightly earlier version)
2011-07-17 21:15:20 +00:00
mp
f3103cdbe2 Clear the filter memory area before using it. Leaving it uninitialized may
leak previous kernel stack contents through a malicioius BPF filter.

PR:		kern/158880
Submitted by:	Guy Harris
Obtained from:	OpenBSD
MFC after:	1 week
2011-07-14 21:06:22 +00:00
zec
99a0b299b3 Permit ARP to proceed for IPv4 host routes for which the gateway is the
same as the host address.  This already works fine for INET6 and ND6.

While here, remove two function pointers from struct lltable which are
only initialized but never used.

MFC after:	3 days
2011-07-08 09:38:33 +00:00
thompsa
9d0e437193 Grab the rlock before checking if our interface is enabled, it could be
possible to hit a dead pointer when changing interfaces.

PR:		kern/156978
Submitted by:	Andrew Boyer
MFC after:	1 week
2011-07-07 20:02:09 +00:00
bz
300a95bf76 Tag mbufs of all incoming frames or packets with the interface's FIB
setting (either default or if supported as set by SIOCSIFFIB, e.g.
from ifconfig).

Submitted by:	Alexander V. Chernikov (melifaro ipfw.ru)
Reviewed by:	julian
MFC after:	2 weeks
2011-07-03 16:08:38 +00:00
bz
cf260e73d6 Remove extra white space to comply with style for the rest of the struct.
MFC after:	2 weeks
2011-07-03 15:34:09 +00:00
bz
9cad5bfef3 Add infrastructure to allow all frames/packets received on an interface
to be assigned to a non-default FIB instance.

You may need to recompile world or ports due to the change of struct ifnet.

Submitted by:	cjsp
Submitted by:	Alexander V. Chernikov (melifaro ipfw.ru)
		(original versions)
Reviewed by:	julian
Reviewed by:	Alexander V. Chernikov (melifaro ipfw.ru)
MFC after:	2 weeks
X-MFC:		use spare in struct ifnet
2011-07-03 12:22:02 +00:00
pluknet
29ff2b4aff Update ifc_len field of struct ifconf passed for the ioctl SIOCGIFCONF32
(i.e. under COMPAT_FREEBSD32) in case ifconf() returned success to match
the native SIOCGIFCONF behavior.

PR:		kern/158369
Reported by:	Paul Procacci <pprocacci att gmail com>
MFC after:	1 week
2011-06-28 08:41:44 +00:00
bz
a8e6967ab3 Garbage collect never used global, sysctl, externs.
MFC after:	1 week
2011-06-21 07:19:03 +00:00
bz
98020d5ece Leave an extra comment about flowtable and IPv6 support rectifying a
previous comment.

MFC after:	1 week
2011-06-20 12:35:12 +00:00
bz
f4689a8d0f gre(4) was using a field in the softc to detect possible recursion.
On MP systems this is not a usable solution anymore and could easily
lead to false positives triggering enough logging that even  using
the console was no longer usable (multiple parallel ping -f can do).

Switch to the suggested solution of using mbuf tags to carry per
packet state between gre_output() invocations.  Contrary to the
proposed solution modelled after gif(4) only allocate one mbuf tag
per packet rather than per packet and per gre_output() pass through.

As the sysctl to control the possible valid (gre in gre) nestings does
no sanity checks, make sure to always allocate space in the mbuf tag
for at least one, and at most 255 possible gre interfaces to detect
loops in addition to the counter.

Submitted by:	Cristian KLEIN (cristi net.utcluj.ro) (original version)
PR:		kern/114714
Reviewed by:	Cristian KLEIN (cristi net.utcluj.ro)
Reviewed bu:	Wooseog Choi (ben_choi hotmail.com)
Sponsored by:	Sandvine Incorporated
MFC after:	1 week
2011-06-18 09:34:03 +00:00
luigi
7cd78b912e Grab one of the ifcap bits for netmap, and enable printing in ifconfig.
Document the fact that we might want an IFCAP_CANTCHANGE mask,
even though the value is not yet used in sys/net/if.c

(asked on -current a week ago, no feedback so i assume no objection).
2011-06-14 12:40:55 +00:00
zec
5bdda7f91b Set curvnet context in a callout-trigerred code path.
MFC after:	3 days
2011-06-07 20:46:03 +00:00
jhb
b37cdd581d Properly return an ENOBUFS error if a write to a tun(4) device fails
due to m_uiotombuf() failing.

While here, trim unneeded error handling related to tuninit() since it
can never fail.

Submitted by:	Martin Birgmeier  la5lbtyi aon at
Reviewed by:	glebius
MFC after:	1 week
2011-06-03 13:47:05 +00:00
rwatson
79f582472b Add an optional netisr dispatch point at ether_input(), but set the
default dispatch method to NETISR_DISPATCH_DIRECT in order to force
direct dispatch.  This adds a fairly negligble overhead without
changing default behavior, but in the future will allow deferred or
hybrid dispatch to other worker threads before link layer processing
has taken place.

For example, this could allow redistribution using RSS hashes
without ethernet header cache line hits, if the NIC was unable to
adequately implement load balancing to too small a number of input
queues -- perhaps due to hard queueset counts of 1, 3, or 8, but in
a modern system with 16-128 threads.  This can happen on highly
threaded systems, where you want want an ithread per core,
redistributing work to other queues, but also on virtualised systems
where hardware hashing is (or is not) available, but only a single
queue has been directed to one VCPU on a VM.

Note: this adds a previously non-present assertion about the
equivalence of the ifnet from which the packet is received, and the
ifnet stamped in the mbuf header.  I believe this assertion to
generally be true, but we'll find out soon -- if it's not, we might
have to add additional overhead in some cases to add an m_tag with
the originating ifnet pointer stored in it.

Reviewed by:    bz
MFC after:      3 weeks
Sponsored by:   Juniper Networks, Inc.
2011-06-01 20:00:25 +00:00
nwhitehorn
a69e106b2f On multi-core, multi-threaded PPC systems, it is important that the threads
be brought up in the order they are enumerated in the device tree (in
particular, that thread 0 on each core be brought up first). The SLIST
through which we loop to start the CPUs has all of its entries added with
SLIST_INSERT_HEAD(), which means it is in reverse order of enumeration
and so AP startup would always fail in such situations (causing a machine
check or RTAS failure). Fix this by changing the SLIST into an STAILQ,
and inserting new CPUs at the end.

Reviewed by:	jhb
2011-05-31 15:11:43 +00:00
rwatson
d81ad1a304 Rework netisr policy mechanism so that per-protocol dispatch policies can
be represented:

- A single policy namespace is defined, consisting of four possible
  policies: "default" to use the global default, "deferred" to force
  deferred dispatch, "direct" to employ direct dispatch where possible, and
  "hybrid" which makes a dynamic decision based on CPU affinity, ordering,
  etc.  Routines are implemented to convert between strings and an integer
  namespace.

- A new global variable, netisr_dispatch_policy, subsumes existing global
  variables for direct dispatch, forced direct dispatch, etc, and is used
  for explicit policy interpretation and composition.  Old variables remain
  so that they can be exported by legacy sysctls for use by old netstat(1)
  binaries.  A new sysctl and tunable, netisr.dispatch.policy, accepts the
  above strings for specifying a global policy default.

- The protocol registration structure, netisr_handler, grows an nh_dispatch
  field, which accepts a per-policy policy override.  The default value is
  '0', which corresponds to "default", meaning that protocols will accept
  the global default policy unless otherwise specified.

- Policies are now interpreted and composed explicitly at various points in
  packet dispatch; protocol policies override global policies.

- Protocols grow the ability to express a non-opinion about affinity even
  when implenting m2cpuid by returning NETISR_CPUID_NONE.  In that case, the
  framework falls back on source ordering, rather than simply using the
  current CPU.

These changes are in support of allowing link layer re-dispatch based on
RSS or similar hashes provided by NICs, especially in the case where the
number of hardware receive queues matches hardware core count, rather than
hardware thread count, requiring further software redistributeon.  (i.e.,
on RMI XLR).

MFC after:      3 weeks
Reviewed by:    bz
Sponsored by:   Juniper Networks, Inc.
2011-05-24 12:34:19 +00:00
zec
0e7fcf0b2c Allow for vlan(4) interfaces with MTU of 1500 bytes to be configured
on top of epair(4) virtual interfaces, since there's no physical
hardware associated with epair interfaces which would imply any
constraints on MTU sizes.

MFC after:	3 days
2011-05-24 08:02:55 +00:00
zec
3ab76c6800 Let epair(4) virtual interfaces report fake link / media status,
by borrowing the skeleton of if_media manipulation and reporting
code from if_lagg(4).  The main motivation behind this change is
to allow for epair(4) interfaces to participate in STP if_bridge(4)
configurations.

Reviewed by:	bz
MFC after:	3 days
2011-05-24 07:57:28 +00:00
qingli
a1bf1a2582 The statically configured (permanent) ARP entries are removed when an
interface is brought down, even though the interface address is still
valid. This patch maintains the permanent ARP entries as long as the
interface address (having the same prefix as that of the ARP entries)
is valid.

Reviewed by:	delphij
MFC after:	5 days
2011-05-20 19:12:20 +00:00
marius
03919a3303 - Add 10baseT as an alias for 10baseT/UTP.
- Add shorthand aliases for common media+option combinations as announced
  by miibus(4) so that one can actually supply the media strings found in
  the dmesg output to ifconfig(8).

Obtained from:	NetBSD (in principle)
MFC after:	2 weeks
2011-05-15 12:58:29 +00:00
yongari
0aab37190f Fix white space nits and style 2011-05-06 20:46:29 +00:00
yongari
b282e7aca8 Do not increment collision counter if transmit have failed.
Transmission error in tun(4) is queueing error(i.e. ENOBUFS) and it
has nothing to do with collision.

Reported by:	Zeus V Panchenko (zeus <> ibs dot dn dot ua)
2011-05-06 20:37:07 +00:00
thompsa
fc83a48265 LACP frames must not be send VLAN-tagged, check for that before processing.
PR:		kern/156743
Submitted by:	Dmitrij Tejblum
MFC after:	1 week
2011-04-30 20:34:52 +00:00
bz
1910487722 Make various (pseudo) interfaces compile without INET in the kernel
adding appropriate #ifdefs.  For module builds the framework needs
adjustments for at least carp.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	4 days
2011-04-27 19:30:44 +00:00
glebius
8c3b1b83f9 When removing ifnets, we should first remove the reference to ifnet
from the interface index, then decrease refcount, not vice versa.

Otherwise there is a race (reproducible) when if_free_internal()
contests on IFNET_WLOCK(), and we got a zero-refed ifnet in the
index for a long time. It may be picked by some other thread,
that runs ifnet_byindex_ref(), who takes the ifnet from index,
and bumps refcount. When reader drops the lock, if_free_internal()
proceeds with free. Then reader tries to free it a second time.
2011-04-04 07:45:08 +00:00
jeff
2d7d8c05e7 - Merge changes to the base system to support OFED. These include
a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND,
   and other miscellaneous small features.
2011-03-21 09:40:01 +00:00
dchagin
0f55e947bd Remove dead code.
MFC after:	1 Week
2011-03-20 08:35:00 +00:00
dchagin
a96a94aaf2 ouch, newrt is used on the return path, my fault.
Partialy revert the previous change.

MFC after:	1 Week.
2011-03-19 21:10:57 +00:00
dchagin
b3fb445553 A bit rearranged rtalloc1_fib() code.
Initialize a variable when it is really needed.
To avoid code duplication move the miss label to line up and jump on it.

MFC after:	1 Week
2011-03-19 19:50:36 +00:00
dchagin
9dffdca01d Remove a now unused variable.
MFC after:	1 Week
2011-03-19 16:52:06 +00:00
eri
2ad117efbd Fix a panic that can happen when trying to destroy a lagg(4) with scheduler set to none.
Approved by:	thompsa(mentor)
MFC after:	1 week
2011-03-04 20:37:38 +00:00
bz
209ebad7af Hide the outer IP addresses of a tunnel interfaces (gif(4), gre(4))
from processes inside jails if the addresses do not belong to the jail.

Originally reported by: Pieter de Boer via remko
PR:		kern/151119
Tested by:	Piotr KUCHARSKI (nospam 42.pl) [gif]
MFC after:	1 week
2011-03-02 21:39:08 +00:00
brucec
6d9b42b486 Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
bz
b9b7d3e93a Mfp4 CH=177274,177280,177284-177285,177297,177324-177325
VNET socket push back:
  try to minimize the number of places where we have to switch vnets
  and narrow down the time we stay switched.  Add assertions to the
  socket code to catch possibly unset vnets as seen in r204147.

  While this reduces the number of vnet recursion in some places like
  NFS, POSIX local sockets and some netgraph, .. recursions are
  impossible to fix.

  The current expectations are documented at the beginning of
  uipc_socket.c along with the other information there.

  Sponsored by: The FreeBSD Foundation
  Sponsored by: CK Software GmbH
  Reviewed by:  jhb
  Tested by:    zec

Tested by:	Mikolaj Golub (to.my.trociny gmail.com)
MFC after:	2 weeks
2011-02-16 21:29:13 +00:00
bz
1289b7e264 Mfp4 CH=177255:
Resort the CURVNET_SET* macros in the non-VNET_DEBUG case to match
  the call order of the VNET_DEBUG case.

  Add the VNET_ASSERT() to the non-VNET_DEBUG case as well so that
  INVARIANTS will still catch problems.

  Sponsored by: The FreeBSD Foundation
  Sponsored by: CK Software GmbH
  Reviewed by:  jhb

MFC after:	2 weeks
2011-02-11 14:17:58 +00:00
bz
aad842be85 Mfp4 CH=177255:
Make VNET_ASSERT() available with either VNET_DEBUG or INVARIANTS.

  Change the syntax to match KASSERT() to allow more flexible panic
  messages rather than having a printf with hardcoded arguments
  before panic.

  Adjust the few assertions we have to the new format (and enhance
  the output).

  Sponsored by: The FreeBSD Foundation
  Sponsored by: CK Software GmbH
  Reviewed by:	jhb

MFC after:	2 weeks
2011-02-11 13:27:00 +00:00