[ValueTracking] avoid crashing from bad assumptions (PR31809)
A program may contain llvm.assume info that disagrees with other
analysis. This may be caused by UB in the program, so we must not
crash because of that.
As noted in the code comments:
https://llvm.org/bugs/show_bug.cgi?id=31809
...we can do better, but this at least avoids the assert/crash in the
bug report.
Differential Revision: https://reviews.llvm.org/D29395
This fixes an assertion when building editors/emacs-devel.
PR: 216614
The change was made to support glibc and believed to be a no-op on
FreeBSD, but that is not the case for architectures with multiple page
sizes, such as arm64. The relro p_memsz header was rounded up to the
default maximum page size (64K). When 4K pages are in use, multiple
pages beyond the final PT_LOAD segment had their permissions changed to
read-only after application of relocations and copy relocations, which
led to a segfault in certain cases.
This reverts upstream r290986. I have started a discussion about the
upstream fix on the LLVM mailing list.
Reported by: andrew
Sponsored by: The FreeBSD Foundation
Fix use-after-free bug in AffectedValueCallbackVH::allUsesReplacedWith
When transferring affected values in the cache from an old value,
identified by the value of the current callback, to the specified new
value we might need to insert a new entry into the DenseMap which
constitutes the cache. Doing so might delete the current callback
object. Move the copying logic into a new function, a member of the
assumption cache itself, so that we don't run into UB should the
callback handle itself be removed mid-copy.
Differential Revision: https://reviews.llvm.org/D28749
This should fix crashes when building lld (as part of the llvmXY ports).
Reported by: jbeich
PR: 216117
Fix PR31644 introduced by r287138 and add a regression test.
Thanks Dimitry Andric for the report and fix!
This should restore -MP output to what it was before.
Reported by: jbeich
PR: 216043
The libgcc __register_frame and __deregister_frame functions take a
pointer to a set of FDE/CIEs, terminated by an entry where length is 0.
In Apple's libunwind implementation the pointer is taken to be to a
single FDE. I suspect this was just an Apple bug, compensated by Apple-
specific code in LLVM.
See lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp and
http://lists.llvm.org/pipermail/llvm-dev/2013-April/061737.html
for more detail.
This change is based on the LLVM RTDyldMemoryManager.cpp. It should
later be changed to be alignment-safe.
Reported by: dim
Reviewed by: dim
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8869
Add some shortcuts in LazyValueInfo to reduce compile time of
Correlated Value Propagation.
The patch is to partially fix PR10584. Correlated Value Propagation
queries LVI to check non-null for pointer params of each callsite. If
we know the def of param is an alloca instruction, we know it is
non-null and can return early from LVI. Similarly, CVP queries LVI to
check whether pointer for each mem access is constant. If the def of
the pointer is an alloca instruction, we know it is not a constant
pointer. These shortcuts can reduce the cost of CVP significantly.
Differential Revision: https://reviews.llvm.org/D18066
This significantly reduces memory usage and compilation time when
compiling a particular C++ source file of the graphics/colmap port.
PR: 215136
MFC after: 3 days
[PowerPC] Refactor soft-float support, and enable PPC64 soft float
This change enables soft-float for PowerPC64, and also makes
soft-float disable all vector instruction sets for both 32-bit and
64-bit modes. This latter part is necessary because the PPC backend
canonicalizes many Altivec vector types to floating-point types, and
so soft-float breaks scalarization support for many operations. Both
for embedded targets and for operating-system kernels desiring
soft-float support, it seems reasonable that disabling hardware
floating-point also disables vector instructions (embedded targets
without hardware floating point support are unlikely to have Altivec,
etc. and operating system kernels desiring not to use floating-point
registers to lower syscall cost are unlikely to want to use vector
registers either). If someone needs this to work, we'll need to
change the fact that we promote many Altivec operations to act on
v4f32. To make it possible to disable Altivec when soft-float is
enabled, hardware floating-point support needs to be expressed as a
positive feature, like the others, and not a negative feature,
because target features cannot have dependencies on the disabling of
some other feature. So +soft-float has now become -hard-float.
Fixes PR26970.
Pull in r283061 from upstream clang trunk (by Hal Finkel):
[PowerPC] Enable soft-float for PPC64, and +soft-float -> -hard-float
Enable soft-float support on PPC64, as the backend now supports it.
Also, the backend now uses -hard-float instead of +soft-float, so set
the target features accordingly.
Fixes PR26970.
Reported by: Mark Millard
PR: 214433
[PPC] Set SP after loading data from stack frame, if no red zone is
present
Follow-up to r280705: Make sure that the SP is only restored after
all data is loaded from the stack frame, if there is no red zone.
This completes the fix for
https://llvm.org/bugs/show_bug.cgi?id=26519.
Differential Revision: https://reviews.llvm.org/D24466
Reported by: Mark Millard
PR: 214433
Call Frame Optimization on i386 and libunwind, by disallowing the
optimization for i386-freebsd12.
This should fix some instances of broken exception handling when frame
pointers are omitted, in particular some unittests run during the build
of editors/libreoffice.
This hack will be removed as soon as upstream has implemented a more
permanent fix for this problem.
Upstream PR: https://llvm.org/bugs/show_bug.cgi?id=30879
Reviewed by: emaste
PR: 212343
[AArch64] Don't blindly lower f16/f128 FCCMPs.
Instead, extend f16 (like we do when lowering a standalone SETCC),
and let f128 be legalized to the RT calls.
Fixes PR26803.
This fixes a fatal "Cannot select" backend error when building the
net/freerdp port for AArch64.
PR: 214380
MFC after: 3 days
[AArch64] PR28877: Don't assume we're running after legalization when
creating vcvtfp2fxs
Summary:
The DAG combine transformation that was generating the
aarch64_neon_vcvtfp2fxs node was assuming that all inputs where legal
and wasn't accounting that the input could be a v4f64 if we're trying
to do the transformation before legalization. We now bail out in this
case.
All illegal types besides v4f64 were already rejected.
Fixes https://llvm.org/bugs/show_bug.cgi?id=28877
Reviewers: jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D23261
This fixes several ports on AArch64.
Requested by: andrew
MFC after: 3 days
Previously most messages included a newline in the string, but a few of
them were missing. Fix these and simplify by just adding the newline in
the _LIBUNWIND_LOG macro itself.
While here correct 'libuwind' typo (missing 'n').
Upstream LLVM libunwind commits r280086 and r280103.
[x86] don't try to create a vector integer inst for an SSE1 target
(PR30512)
This bug was introduced with:
http://reviews.llvm.org/rL272511
We need to restrict the lowering to v4f32 comparisons because that's
all SSE1 can handle.
This should fix:
https://llvm.org/bugs/show_bug.cgi?id=28044
This avoids a "Do not know how to custom type legalize this operation"
error when building the multimedia/ffmpeg port on i386 with SSE enabled.
[PPC] Claim stack frame before storing into it, if no red zone is
present
Unlike PPC64, PPC32/SVRV4 does not have red zone. In the absence of
it there is no guarantee that this part of the stack will not be
modified by any interrupt. To avoid this, make sure to claim the
stack frame first before storing into it.
This fixes https://llvm.org/bugs/show_bug.cgi?id=26519.
Differential Revision: https://reviews.llvm.org/D24093
Add ISD::EH_DWARF_CFA, simplify @llvm.eh.dwarf.cfa on Mips, fix on
PowerPC
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the
GCC-compatible __builtin_dwarf_cfa() builtin. As pointed out in
PR26761, this is currently broken on PowerPC (and likely on ARM as
well). Currently, @llvm.eh.dwarf.cfa is lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however,
does not work for PowerPC. Because of the way that the stack layout
works, the canonical frame address is not exactly (FRAMEADDR +
FRAME_TO_ARGS_OFFSET) on PowerPC (there is a lower save-area offset
as well), so it is not just a matter of implementing
FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its semantics --
We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA
construct itself (since it can be easily represented as a
fixed-offset FrameIndex)). Mips currently does this, but by using a
custom lowering for ADD that specifically recognizes the (FRAMEADDR,
FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default
expands using the existing logic, but can be directly lowered by the
target. Mips is updated to use this method (which simplifies its
implementation, and I suspect makes it more robust), and updates
PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
