986 Commits

Author SHA1 Message Date
peter
a51c9b6627 Initiate deorbit burn for the i386-only a.out related support. Moves are
under way to move the remnants of the a.out toolchain to ports.  As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL.  It has already lasted WAY beyond
that.

Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.

Tested on: i386 (extensively), alpha
2002-09-17 01:49:00 +00:00
mini
62e41a5a7c Add kernel support needed for the KSE-aware libpthread:
- Maintain fpu state across signals.
	- Save and restore FPU state properly in ucontext_t's.

Reviewed by:	deischen, julian
Approved by:	-arch
2002-09-16 19:25:41 +00:00
jhb
891a98175a Add a function pci_probe_route_table() that returns true if our PCI BIOS
supports interrupt routing and if the specified PCI bus is present in the
routing table.
2002-09-06 22:15:44 +00:00
jhb
49487ffa2c - Add a pci_cfgintr_valid() function to see if a given IRQ is a valid
IRQ for an entry in a PCIBIOS interrupt routing ($PIR) table.
- Change pci_cfgintr() to except the current IRQ of a device as a fourth
  argument and to use that IRQ for the device if it is valid.
- If an intpin entry in a $PIR entry has a link of 0, it means that that
  intpin isn't connected to anything that can trigger an interrupt.  Thus,
  test the link against 0 to find invalid entries in the table instead of
  implicitly relying on the irqs field to be zero.  In the machines I have
  looked at, intpin entries with a link of 0 often have the bits for all
  possible interrupts for PCI devices set.
2002-09-06 17:08:07 +00:00
jhb
0859fe04c5 Function prototypes don't need 'extern'. 2002-09-04 19:31:09 +00:00
peter
c3bdd669c3 Change hw.physmem and hw.usermem to unsigned long like they used to be
in the original hardwired sysctl implementation.

The buf size calculator still overflows an integer on machines with large
KVA (eg: ia64) where the number of pages does not fit into an int.  Use
'long' there.

Change Maxmem and physmem and related variables to 'long', mostly for
completeness.  Machines are not likely to overflow 'int' pages in the
near term, but then again, 640K ought to be enough for anybody.  This
comes for free on 32 bit machines, so why not?
2002-08-30 04:04:37 +00:00
jake
821a548da7 Renamed poorly named setregs to exec_setregs. Moved its prototype to
imgact.h with the other exec support functions.
2002-08-29 06:17:48 +00:00
peter
7b726290f1 OK, I have had it with losing my console because the AP's print their "I am
alive!" message right as the scsi probe messages happen.  This is a bit
nasty, but it seems to work.  At the point that we unlock the AP's, briefly
wait till they are all done while we hold the console on their behalf.
2002-08-28 23:24:05 +00:00
mike
d541375722 Move several MI types from <machine/_types.h> to <sys/_types.h>.
These types are unlikely to ever become very MD.  They include:
clockid_t, ct_rune_t, fflags_t, intrmask_t, mbstate_t, off_t, pid_t,
rune_t, socklen_t, timer_t, wchar_t, and wint_t.

While moving them, make a few adjustments (submitted by bde):
o __ct_rune_t needs to be precisely `int', not necessarily __int32_t,
  since the arg type of the ctype functions is int.
o __rune_t, __wchar_t and __wint_t inherit this via a typedef of
  __ct_rune_t.
o Some minor wording changes in the comment blocks for ct_rune_t and
  mbstate_t.

Submitted by:	bde (partially)
2002-08-23 16:49:06 +00:00
mike
9e6f796b0d o Merge <machine/ansi.h> and <machine/types.h> into a new header
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
  macros, which are only MD because of gratuitous differences between
  architectures.
o Change all headers to make use of this.  This mainly involves
  changing:
    #ifdef _BSD_FOO_T_
    typedef	_BSD_FOO_T_	foo_t;
    #undef _BSD_FOO_T_
    #endif
  to:
    #ifndef _FOO_T_DECLARED
    typedef	__foo_t	foo_t;
    #define	_FOO_T_DECLARED
    #endif

Concept by:	bde
Reviewed by:	jake, obrien
2002-08-21 16:20:02 +00:00
mux
2373503eaf Use the __BUS_ACCESSOR macro for NEXUS_ACCESSOR
instead of rolling our own implementation.

Reviewed by:	tmm
2002-08-20 13:50:17 +00:00
alc
e363dee16b o Introduce pmap_page_is_mapped(). Its purpose is to obsolete
the PG_MAPPED flag.
2002-08-05 03:40:28 +00:00
phk
7f3d1cc63f Move a prototype to the least wrong place.
Suggested by:	bde
2002-08-02 18:45:43 +00:00
phk
b678abefa2 The Elan SC520 MMCR is actually 16bit wide, so u_char is inconvenient. 2002-07-31 13:45:44 +00:00
iwasaki
b2baff05fb Resolve conflicts arising from the ACPI CA 20020725 import. 2002-07-30 19:35:32 +00:00
mike
9f0ddc464e Create a new header <machine/_stdint.h> for storing MD parts of
<stdint.h>.  Previously, parts were defined in <machine/ansi.h> and
<machine/limits.h>.  This resulted in two problems:
  (1) Defining macros in <machine/ansi.h> gets in the way of that
      header only defining types.
  (2) Defining C99 limits in <machine/limits.h> adds pollution to
      <limits.h>.
2002-07-29 17:41:23 +00:00
peter
4a13c91393 Move SWTCH_OPTIM_STATS related code out of cpufunc.h. (This sort of stat
gathering is not an x86 cpu feature)
2002-07-21 05:22:16 +00:00
markm
c5b0a0ebfe Beautify. This has the side effect of improving portability and
making lint work cleaner.

Inspired to do this by:	jhb
2002-07-18 15:56:46 +00:00
phk
a535ae6741 Add initialization code for the AMD Elan sc520 which maps the MMCR
into KVM and sets the i8254 frequency to the correct value.
2002-07-18 12:56:54 +00:00
markm
a6f49f3bf1 Clean up the syntax WRT semicolons at the end of function-like-macros, and protect GCCisms from non-GNU compilers and lint. 2002-07-17 16:19:37 +00:00
markm
5ac51e5b21 Wrap GNU specific code in ifdefs, and help lint out by providing
some alternative definitions.
2002-07-15 13:29:40 +00:00
markm
ba39a3d3df Cast to prevent "signed/unsigned comparison" warnings. 2002-07-15 13:27:43 +00:00
markm
1461a2fddc Warnings and lint-assisting fixes; mark unused function parameters as
unused; wrap GNUisms (asm code) in appropriate #ifdefs.
2002-07-15 13:25:15 +00:00
peter
4d88d6566a Revive backed out pmap related changes from Feb 2002. The highlights are:
- It actually works this time, honest!
- Fine grained TLB shootdowns for SMP on i386.  IPI's are very expensive,
  so try and optimize things where possible.
- Introduce ranged shootdowns that can be done as a single IPI.
- PG_G support for i386
- Specific-cpu targeted shootdowns.  For example, there is no sense in
  globally purging the TLB cache for where we are stealing a page from
  the local unshared process on the local cpu.  Use pm_active to track
  this.
- Add some instrumentation for the tlb shootdown code.
- Rip out SMP code from <machine/cpufunc.h>
- Try and fix some very bogus PG_G and PG_PS interactions that were bad
  enough to cause vm86 bios calls to break.  vm86 depended on our existing
  bugs and this was the cause of the VESA panics last time.
- Fix the silly one-line error that caused the 'panic: bad pte' last time.
- Fix a couple of other silly one-line errors that should have caused more
  pain than they did.

Some more work is needed:
- pmap_{zero,copy}_page[_idle].  These can be done without IPI's if we
  have a hook in cpu_switch.
- The IPI handlers need some cleanup.  I have a bogus %ds load that can
  be avoided.
- APTD handling is rather bogus and appears to be a large source of
  global TLB IPI shootdowns for no really good reason.

I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop.
I expect to see a bigger difference when there is significant pageout
activity or the system otherwise has memory shortages.

I have backed out a few optimizations that I had been using over the last
few days in order to be a little more conservative.  I'll revisit these
again over the next few days as the dust settles.

New option:  DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
peter
cfe10c5fa0 Bah, move the invltlb counter to C code and hook a debug sysctl onto it. 2002-07-11 08:31:10 +00:00
dillon
e296b5e410 Remove the critmode sysctl - the new method for critical_enter/exit (already
the default) is now the only method for i386.

Remove the paraphanalia that supported critmode.  Remove td_critnest, clean
up the assembly, and clean up (mostly remove) the old junk from
cpu_critical_enter() and cpu_critical_exit().
2002-07-10 20:15:58 +00:00
peter
4b40f24125 Cosmetic. Remove #if 0 definition of vtophys() - it predates 4MB pages.
Remove avtophys(), it isn't referenced anywhere.
2002-07-08 08:14:28 +00:00
obrien
8886557816 This is the start of the FreeBSD/x86_64 kernel. 2002-06-30 08:57:17 +00:00
obrien
437dcf4e43 This is the start of the FreeBSD/x86_64 kernel. 2002-06-30 07:42:36 +00:00
obrien
2a63999c33 Gcc 3.1 varargs support. 2002-06-30 07:22:30 +00:00
mike
beba9fcf0e Since printf(3) now supports the `j' conversion specifier, use that
when printing intmax_t and uintmax_t.

Forgotten by:	mike
Noticed by:	bde
2002-06-30 05:48:03 +00:00
julian
a06b68b34f Add files that are new for KSE. 2002-06-29 07:04:59 +00:00
mp
f6fd70168f Add additional cpuid feature flags and put into a canonical format.
MFC after:	1 week
2002-06-22 23:00:33 +00:00
peter
4830c34648 Move the "- 1" into the RQB_FFS(mask) macro itself so that
implementations can provide a base zero ffs function if they wish.
This changes
  #define RQB_FFS(mask) (ffs64(mask))
  foo = RQB_FFS(mask) - 1;
to
  #define RQB_FFS(mask) (ffs64(mask) - 1)
  foo = RQB_FFS(mask);
On some platforms we can get the "- 1" for free, eg: those that use the
C code for ffs64().

Reviewed by:	jake (in principle)
2002-06-20 06:21:20 +00:00
alfred
0ac0431441 Silence preprocessor warning, No need to use CONCAT with "," and "word". 2002-06-01 20:22:33 +00:00
bde
dee070ee6e Fixed the return value of fpsetmask(). The API requires inversion of the
mask on both input and output to fpsetmask(), but this was only done for
input, so fpsetmask() returned the complement of the old mask (ANDed with
the mask bitfield).

PR:		38170
MFC after:	4 weeks
2002-06-01 17:39:46 +00:00
bde
36c56b3ddf Fixed style bugs in rev.1.9. 2002-06-01 17:27:16 +00:00
dfr
a3b8e6c9c7 Move the definition of ElfN_Hashelt to common headers. The only platform
which has a different definition for this is alpha.
2002-05-30 08:32:18 +00:00
jake
88bdee3b2f Make the run queue parameters machine dependent. Optimize 64 bit
architectures by using a 64 bit word for the bit array which keeps
track of non-empty queues.

Reviewed by:	peter
2002-05-25 01:12:23 +00:00
jhb
096c0249dc Rename pause() to ia32_pause() so it doesn't conflict with the pause()
function defined in <unistd.h>.  I didn't #ifdef _KERNEL it because the
mutex implementation in libpthread will probably need this.
2002-05-22 20:32:39 +00:00
jhb
06e51352f6 Debug registers aren't selectors, so use saner names for the variables in
the inline functions for reading and writing the debug registers.
2002-05-22 13:29:18 +00:00
jhb
fd3295715e - Sort the pause() inline into the appropriate location.
- Add many missing prototypes to the non-GCC section.
2002-05-22 13:27:05 +00:00
jhb
2f66cc911b Rename cpu_pause() to pause(). Originally I was going to make this an
MI API with empty cpu_pause() functions on other arch's, but this
functionality is definitely unique to IA-32, so I decided to leave it
as i386-only and wrap it in #ifdef's.  I should have dropped the cpu_
prefix when I made that decision.

Requested by:	bde
2002-05-22 13:19:22 +00:00
jhb
1a9e2f75a7 Add an inline function cpu_pause() for the IA32 'pause' instruction. 2002-05-21 20:21:53 +00:00
obrien
707b0b13a6 Gcc 3.1 varargs support. 2002-05-10 02:02:54 +00:00
peter
c0e3147cc6 Tidy up some loose ends.
i386/ia64/alpha - catch up to sparc64/ppc:
- replace pmap_kernel() with refs to kernel_pmap
- change kernel_pmap pointer to (&kernel_pmap_store)
  (this is a speedup since ld can set these at compile/link time)
all platforms (as suggested by jake):
- gc unused pmap_reference
- gc unused pmap_destroy
- gc unused struct pmap.pm_count
(we never used pm_count - we track address space sharing at the vmspace)
2002-04-29 07:43:16 +00:00
markm
8801cf491a Stylify (mainly line up macro EOL-continuation \'s), and add a dummy
alternative for lint.
2002-04-21 10:49:00 +00:00
tegge
59deaddc60 Fix typo in adjusted panic message.
Submitted by:	cokane
2002-04-17 22:41:58 +00:00
tegge
79f7500829 Update io_apic_ints array properly when revoking an irq mapping.
Adjust panic message.

Submitted by:	David Xu <bsddiy@yahoo.com>
2002-04-17 18:27:10 +00:00
dwmalone
a1416e3bd8 Move do_cpuid into the correct place in this file and make
the indentation more like the other multi-line assembley in
this file.

Someone who understands gcc constraints could update the
constraints for do_cpuid.
2002-04-10 21:18:46 +00:00