o cpu_idle_hook is expected to be called with interrupts
disabled and re-enables interrupts on return.
o sync with x86: don't idle when the CPU has runnable tasks
o have callers of ia64_call_pal_static() disable interrupts
and re-enable interrupts.
o add, but compile-out, support for idle mode. This will be
enabled at some later time, after proper testing.
o Eliminate IA64_PHYS_TO_RR6 and change all places where the macro is used
by calling either bus_space_map() or pmap_mapdev().
o Implement bus_space_map() in terms of pmap_mapdev() and implement
bus_space_unmap() in terms of pmap_unmapdev().
o Have ia64_pib hold the uncached virtual address of the processor interrupt
block throughout the kernel's life and access the elements of the PIB
through this structure pointer.
This is a non-functional change with the exception of using ia64_ld1() and
ia64_st8() to write to the PIB. We were still using assignments, for which
the compiler generates semaphore reads -- which cause undefined behaviour
for uncacheable memory. Note also that the memory barriers in ipi_send() are
critical for proper functioning.
With all the mapping of uncached memory done by pmap_mapdev(), we can keep
track of the translations and wire them in the CPU. This then eliminates
the need to reserve a whole region for uncached I/O and it eliminates
translation traps for device I/O accesses.
Completely remove the remaining EFI includes and add our own (type)
definitions instead. While here, abstract more of the internals by
providing interface functions.
ia64_count_cpus() and ia64_probe_sapics() called a single function
to do the the actual work. The difference in behaviour was handled
in that function and was further complicated by adding bootverbose
related code. As such, even the simplest of changes was hard to
comprehend.
Untangling has been done by increasing code duplication and using
a more naive style of coding. FWIW, the object file is slightly
smaller than before, so things aren't as bad as it may seem.
Triggered by: a simple fix on the P4 branch that never got merged.
prototypes of cpu_halt(), cpu_reset() and swi_vm() from md_var.h to
cpu.h. This affects db_command.c and kern_shutdown.c.
ia64: move all MD prototypes from cpu.h to md_var.h. This affects
madt.c, interrupt.c and mp_machdep.c. Remove is_physical_memory().
It's not used (vm_machdep.c).
alpha: the MD prototypes have been left in cpu.h with a comment
that they should be there. Moving them is left for later. It was
expected that the impact would be significant enough to be done in
a seperate commit.
powerpc: MD prototypes left in cpu.h. Comment added.
Suggested by: bde
Tested with: make universe (pc98 incomplete)
interrupt block). We use the previously hardcoded address as a
default only, but will otherwise use whatever ACPI tells us.
The address can be found in the MADT table header or in the
LAPIC override table entry.
of the `machdep.acpi_root' sysctl. This is required on ia64
because the root pointer hardly ever, if at all, lives in the
first MB of memory and also because scanning the first MB of
memory can cause machine checks.
This provides a save and reliable way for ACPI tools to work
with the tables if ACPI support is present in the kernel. On
ia64 ACPI is non-optional.
- Don't include ia64_cpu.h and cpu.h
- Guard definitions by _NO_NAMESPACE_POLLUTION
- Move definition of KERNBASE to vmparam.h
o Move definitions of IA64_RR_{BASE|MASK} to vmparam.h
o Move definitions of IA64_PHYS_TO_RR{6|7} to vmparam.h
o While here, remove some left-over Alpha references.
function to return the total number of CPUs and not the highest
CPU id.
o Define mp_maxid based on the minimum of the actual number of
CPUs in the system and MAXCPU.
o In cpu_mp_add, when the CPU id of the CPU we're trying to add
is larger than mp_maxid, don't add the CPU. Formerly this was
based on MAXCPU. Don't count CPUs when we add them. We already
know how many CPUs exist.
o Replace MAXCPU with mp_maxid when used in loops that iterate
over the id space. This avoids a couple of useless iterations.
o In cpu_mp_unleash, use the number of CPUs to determine if we
need to launch the CPUs.
o Remove mp_hardware as it's not used anymore.
o Move the IPI vector array from mp_machdep.c to sal.c. We use
the array as a centralized place to collect vector assignments.
Note that we still assign vectors to SMP specific IPIs in
non-SMP configurations. Rename the array from mp_ipi_vector to
ipi_vector.
o Add IPI_MCA_RENDEZ and IPI_MCA_CMCV. These are used by MCA.
Note that IPI_MCA_CMCV is not SMP specific.
o Initialize the ipi_vector array so that we place the IPIs in
sensible priority classes. The classes are relative to where
the AP wake-up vector is located to guarantee that it's the
highest priority (external) interrupt. Class assignment is
as follows:
class IPI notes
x AP wake-up (normally x=15)
x-1 MCA rendezvous
x-2 AST, Rendezvous, stop
x-3 CMCV, test
starts at offset 8; not 6. Hence the structure is 12 bytes and
not 10 bytes. Adjust the definition so that the ProcessorEnabled
flag is moved from bit 15 to bit 31 in the Flags field.
The definition now matches ACPI 2.0 Errata 1.5.
do it as a side-effect of probing for MP hardware. This allows
us to scan for local SAPICs early (especially before MBUF
initialization).
o Fix the Local SAPIC structure so that matches the Local SAPIC
table entry. Now that the Local SAPIC info is the same as the
Local APIC info, stop dumping the Local APIC entries.
o For every Local SAPIC entry in the MADT that's not disabled,
let the SMP code know about it. They represent actual CPUs.
o Register the OS_BOOT_RENDEZ entry point and provide a (bogus)
implementation for the entry point.
o Provide a mapping for internal IPI numbers to ExtINT vectors.
o In a MP system, announce the CPUs and start them by sending
IPI_AP_WAKEUP to each of them. Not that it makes a difference
at this time :-)
o Miscellaneous style fixes and other adjustments.
This emulates APM device node interface APIs (mainly ioctl) and
provides APM services for the applications. The goal is to support
most of APM applications without any changes.
Implemented ioctls in this commit are:
- APMIO_SUSPEND (mapped ACPI S3 as default but changable by sysctl)
- APMIO_STANDBY (mapped ACPI S1 as default but changable by sysctl)
- APMIO_GETINFO and APMIO_GETINFO_OLD
- APMIO_GETPWSTATUS
With above, many APM applications which get batteries, ac-line
info. and transition the system into suspend/standby mode (such as
wmapm, xbatt) should work with ACPI enabled kernel (if ACPI works well :-)
Reviewed by: arch@, audit@ and some guys
