In case of target mode disable at least ISP2532 return invalid zero
ct_rxid value on CTIO completion. Try to workaround that using tag_id
from the CCB, pointed by still valid ct_syshandle.
I don't know whether this is valid fix or dirty hack, but considering that
alternative is indefinitely stuck command -- it worth trying.
- remove last remnants of never implemented multiple targets support;
- implement missing support for LUN mapping in this area.
Due to existing locking constraints LUN mapping code is practically
unlocked at this point. Hopefully it is not racy enough to live until
somebody get idea how to call sleeping fronend methods under lock also
taken by the same frontend in non-sleepable context. :(
At this point CTL has no known use case for device queue freezes.
Same time existing (considered to be broken) code was found to cause
modify-after-free issues.
is 32b on 32b platforms. So rather than a simple MFC of r284612,
we need to use if_initbaudrate() to properly express a 40Gb speed.
Spotted by: jhb
Sponsored by: Netflix
Revert MFC of r270223, which bumped MAXCPU on amd64 from 64 to 256.
The cpuset_getaffinity(2) and cpuset_setaffinity(2) check minimum set
size, which now fails for binaries compiled on 10.0 with MAXCPU == 64.
Submitted by: jhb
PR: 200802
leave it initialized at NULL.
Since the affected functions where moved from sys/kern/uipc_syscalls.c
to sys/netinet/sctp_syscalls.c it was not possible to MFC r284613.
Therefore, this is a direct commit with the corresponding changes of r284613.
Reported by: Coverity
CID: 1018058, 1018060
Add kern.racct.enable tunable and RACCT_DISABLED config option.
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
MFC r282901:
Build GENERIC with RACCT/RCTL support by default. Note that it still
needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf.
Note those two are MFC-ed together, because the latter one changes the
name of RACCT_DISABLED option to RACCT_DEFAULT_TO_DISABLED. Should have
committed the renaming separately...
Relnotes: yes
Sponsored by: The FreeBSD Foundation
witness: don't warn about matrix inconsistencies without holding the mutex
Lock order checking is done without the witness mutex held, so multiple
threads that are racing to establish a new lock order may read matrix
entries that are in an inconsistent state. Don't print a warning in this
case, but instead just redo the check after taking the witness lock.
Merge r283870 from amd64:
Remove unneeded NULL checks in trap_fatal().
Since td_name is an array member of struct thread, it can never be NULL,
so the check can be removed. In addition, curproc can never be NULL,
so remove the if statement, and splice the two printfs() together.
While here, remove the u_long cast, and use the correct printf format
specifier for curproc->p_pid.
Requested by: jhb
marking the official start of the code slush.
Set the default mdoc(7) version to 10.2, and update the
clang(1) TARGET_TRIPLE and BUILD_TRIPLE to reflect 10.2.
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
pf: Remove frc_direction
We don't use the direction of the fragments for anything. The frc_direction
field is assigned, but never read.
Just remove it.
Differential Revision: https://reviews.freebsd.org/D2825
Reviewed by: gnn
pf: address family must be set when creating a pf_fragment
Fix a panic when handling fragmented ip4 packets with 'drop-ovl' set.
In that scenario we take a different branch in pf_normalize_ip(), taking us to
pf_fragcache() (rather than pf_reassemble()). In pf_fragcache() we create a
pf_fragment, but do not set the address family. This leads to a panic when we
try to insert that into pf_frag_tree because pf_addr_cmp(), which is used to
compare the pf_fragments doesn't know what to do if the address family is not
set.
Simply ensure that the address family is set correctly (always AF_INET in this
path).
When we try to look up a pf_fragment with pf_find_fragment() we compare (see
pf_frag_compare()) addresses (and family), but also protocol. We failed to
save the protocol to the pf_fragment in pf_fragcache(), resulting in failing
reassembly.
PR: 200330
Differential Revision: https://reviews.freebsd.org/D2824
Reviewed by: gnn
- Improve INET/INET6 scope.
- style(9) declarations.
- Make couple of local functions static.
- Even more fixes to !INET and !INET6 kernels.
In collaboration with pluknet
- Toss declarations to fix regular build and NO_INET6 build.
Differential Revision: https://reviews.freebsd.org/D2823
Reviewed by: gnn
pf: Fix forwarding detection
If the direction is not PF_OUT we can never be forwarding. Some input packets
have rcvif != ifp (looped back packets), which lead us to ip6_forward() inbound
packets, causing panics.
Equally, we need to ensure that packets were really received and not locally
generated before trying to ip6_forward() them.
Differential Revision: https://reviews.freebsd.org/D2822
Reviewed by: gnn
Evaluate packet size after the firewall had its chance
Defer the packet size check until after the firewall has had a look at it. This
means that the firewall now has the opportunity to (re-)fragment an oversized
packet.
Differential Revision: https://reviews.freebsd.org/D2821
Reviewed by: gnn
Remove duplicate code
We'll just fall into the same local delivery block under the
'if (m->m_flags & M_FASTFWD_OURS)'.
Suggested by: ae
Differential Revision: https://reviews.freebsd.org/D2820
Reviewed by: gnn
pf: Skip firewall for refragmented ip6 packets
In cases where we scrub (fragment reassemble) on both input and output
we risk ending up in infinite loops when forwarding packets.
Fragmented packets come in and get collected until we can defragment. At
that point the defragmented packet is handed back to the ip stack (at
the pfil point in ip6_input(). Normal processing continues.
Eventually we figure out that the packet has to be forwarded and we end
up at the pfil hook in ip6_forward(). After doing the inspection on the
defragmented packet we see that the packet has been defragmented and
because we're forwarding we have to refragment it.
In pf_refragment6() we split the packet up again and then ip6_forward()
the individual fragments. Those fragments hit the pfil hook on the way
out, so they're collected until we can reconstruct the full packet, at
which point we're right back where we left off and things continue until
we run out of stack.
Break that loop by marking the fragments generated by pf_refragment6()
as M_SKIP_FIREWALL. There's no point in processing those packets in the
firewall anyway. We've already filtered on the full packet.
Differential Revision: https://reviews.freebsd.org/D2819
Reviewed by: gnn
pf: Deal with runt packets
On Ethernet packets have a minimal length, so very short packets get padding
appended to them. This padding is not stripped off in ip6_input() (due to
support for IPv6 Jumbograms, RFC2675).
That means PF needs to be careful when reassembling fragmented packets to not
include the padding in the reassembled packet.
While here also remove the 'Magic from ip_input.' bits. Splitting up and
re-joining an mbuf chain here doesn't make any sense.
Differential Revision: https://reviews.freebsd.org/D2818
Reviewed by: gnn
Preserve IPv6 fragment IDs accross reassembly and refragmentation
When forwarding fragmented IPv6 packets and filtering with PF we
reassemble and refragment. That means we generate new fragment headers
and a new fragment ID.
We already save the fragment IDs so we can do the reassembly so it's
straightforward to apply the incoming fragment ID on the refragmented
packets.
Differential Revision: https://reviews.freebsd.org/D2817
Reviewed by: gnn
In the forwarding case refragment the reassembled packets with the same
size as they arrived in. This allows the sender to determine the optimal
fragment size by Path MTU Discovery.
Roughly based on the OpenBSD work by Alexander Bluhm.
Differential Revision: https://reviews.freebsd.org/D2816
Reviewed by: gnn
Update the pf fragment handling code to closer match recent OpenBSD.
That partially fixes IPv6 fragment handling.
Differential Revision: https://reviews.freebsd.org/D2814
Reviewed by: gnn
- Factor out ip6_deletefraghdr() function, to be shared between IPv6 stack and pf(4).
- Move ip6_deletefraghdr() to frag6.c. (Suggested by bz)
Differential Revision: https://reviews.freebsd.org/D2813
Reviewed by: gnn
sfxge: do not use DEBUG_FLAGS to enable extra debug checks
DEBUG_FLAGS are set to DEBUG option value when kernel is built.
For example, it is -g in GENERIC config to have debug symbols.
Also DEBUG_FLAGS are used to determine if ctfconvert should keep
debug symbols.
Since we redefined DEBUG_FLAGS, debug symbols were always missing.
ctfconvert complains about it during kernel build.
It is incorrect to append DEBUG_FLAGS, since if DEBUG has no -g (or
similar), we'll have no debug symbols and ctfconvert will complain.
If it incorrect to always have -g in our DEBUG_FLAGS, since debug
symbols presence should be controllable by kernel config.
So, just add disabled by default addition of -DDEBUG=1 to CFLAGS.
Reviewed by: imp
Sponsored by: Solarflare Communications, Inc.
sfxge: add 7xxx NICs family support
Support 7xxx adapters including firmware-assisted TSO and VLAN tagging:
- Solarflare Flareon Ultra 7000 series 10/40G adapters:
- Solarflare SFN7042Q QSFP+ Server Adapter
- Solarflare SFN7142Q QSFP+ Server Adapter
- Solarflare Flareon Ultra 7000 series 10G adapters:
- Solarflare SFN7022F SFP+ Server Adapter
- Solarflare SFN7122F SFP+ Server Adapter
- Solarflare SFN7322F Precision Time Synchronization Server Adapter
- Solarflare Flareon 7000 series 10G adapters:
- Solarflare SFN7002F SFP+ Server Adapter
Support utilities to configure adapters and update firmware.
The work is done by Solarflare developers
(Andy Moreton, Andrew Lee and many others),
Artem V. Andreev <Artem.Andreev at oktetlabs.ru> and me.
Sponsored by: Solarflare Communications, Inc.
It is required to cope with u_long limit for 10 Gbps in a right way.
It is a direct commit to stable/10 since head differs (head does not
have if_initbaudrate(), if_baudrate is simply uint64_t).
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2849
Implement multiqueue (max 2 tx/rx queues) for the 82574L chipset.
Change default tuning parameters to handle this new configuration if
EM_MULTIQUEUE is set in the kernel configuration. Off by default.
See r283959 changelog for the scope of these changes.
Relnotes: Yes
Sponsored by: Limelight Networks
