provided the latter is nonzero. At this point, the former is a fairly
arbitrary default value (DFTPHYS), so changing it to any reasonable
value specified by the device driver is safe. Using the maximum of
these limits broke ffs clustered i/o for devices whose si_iosize_max
is < DFLTPHYS. Using the minimum would break device drivers' ability
to increase the active limit from DFTLPHYS up to MAXPHYS.
Copied the code for this and the associated (unnecessary?) fixup of
mp_iosize_max to all other filesystems that use clustering (ext2fs and
msdosfs). It was completely missing.
PR: 36309
MFC-after: 1 week
improvements.
1) If deleting an entry results in a chain of deleted slots ending in an
empty slot, then we can be a bit more aggressive about marking slots as
empty.
2) The last stage of the FNV hash is to xor the last byte of data
into the hash. This means that filenames which differ only in
the last byte will be placed close to one another in the hash
table, which forms longer chains. To work around this common
case, we also hash in the address of the dirhash structure.
news/cancel = news/articles/control/cancel for a tradspool inn server
squid2 = squid level 2 directory (dirs called 00->FF)
squid3 = squid level 3 directory (files called 00001F00->00001FFF)
mean #probes for
home dir mh inbox news/cancel tmp squid2 squid3
old successful 1.02 3.19 4.07 1.10 7.85 2.06
new successful 1.04 1.32 1.27 1.04 1.93 1.17
old unsuccessful 1.08 4.50 5.37 1.17 10.76 2.69
new unsuccessful 1.08 1.73 1.64 1.17 2.89 1.37
Reviewed by: iedowse
MFC after: 2 weeks
locking flags when acquiring a vnode. The immediate purpose is
to allow polling lock requests (LK_NOWAIT) needed by soft updates
to avoid deadlock when enlisting other processes to help with
the background cleanup. For the future it will allow the use of
shared locks for read access to vnodes. This change touches a
lot of files as it affects most filesystems within the system.
It has been well tested on FFS, loopback, and CD-ROM filesystems.
only lightly on the others, so if you find a problem there, please
let me (mckusick@mckusick.com) know.
the bio and buffer structures to have daddr64_t bio_pblkno,
b_blkno, and b_lblkno fields which allows access to disks
larger than a Terabyte in size. This change also requires
that the VOP_BMAP vnode operation accept and return daddr64_t
blocks. This delta should not affect system operation in
any way. It merely sets up the necessary interfaces to allow
the development of disk drivers that work with these larger
disk block addresses. It also allows for the development of
UFS2 which will use 64-bit block addresses.
update the free-space statistics in some cases. The problem affected
directory blocks when the free space dropped below the size of the
maximum allowed entry size. When this happened, the free-space
summary information could claim that there are no further blocks
that can fit a maximum-size entry, even if there are.
The effect of this bug is that the directory may be enlarged even
though there is space within the directory for the new entry. This
wastes disk space and has a negative impact on performance.
Fix it by correctly computing the dh_firstfree array index, adding
a helper macro for clarity. Put an extra sanity check into
ufsdirhash_checkblock() to detect the situation in future.
Found by: dwmalone
Reviewed by: dwmalone
MFC after: 1 week
read-only.
The trouble here is that we don't reopen the device in read/write mode
when we remount in read/write mode resulting in a filesystem sending
write requests to a device which was only opened read/only.
I'm not quite sure how such a reopen would best be done and defer
the problem to more agile hackers.
and isn't strictly required. However, it lowers the number of false
positives found when grep'ing the kernel sources for p_ucred to ensure
proper locking.
Remove bowrite(), it is now unused.
This is the first step in getting entirely rid of BIO_ORDERED which is
a generally accepted evil thing.
Approved by: mckusick
The use of the zone allocator may or may not be overkill.
There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need
to revisit.
This shaves about 60 bytes of struct vnode which on my laptop means
600k less RAM used for vnodes.
o Modify the system call syntax for extattr_{get,set}_{fd,file}() so
as not to use the scatter gather API (which appeared not to be used
by any consumers, and be less portable), rather, accepts 'data'
and 'nbytes' in the style of other simple read/write interfaces.
This changes the API and ABI.
o Modify system call semantics so that extattr_get_{fd,file}() return
a size_t. When performing a read, the number of bytes read will
be returned, unless the data pointer is NULL, in which case the
number of bytes of data are returned. This changes the API only.
o Modify the VOP_GETEXTATTR() vnode operation to accept a *size_t
argument so as to return the size, if desirable. If set to NULL,
the size will not be returned.
o Update various filesystems (pseodofs, ufs) to DTRT.
These changes should make extended attributes more useful and more
portable. More commits to rebuild the system call files, as well
as update userland utilities to follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
inode'' panic. This change corrects that problem by setting the
fs_active flag when the inode map changes to notify the snapshot
code that the cylinder group must be rescanned.
Submitted by: Robert Watson <rwatson@FreeBSD.org>
without being reclaimed. This bug was introduced in revision 1.95
dealing with filenames placed in newly allocated directory blocks,
thus is not present in 4.X systems. The bug is triggered when a
new entry is made in a directory after the data block containing
the original new entry has been written, but before the inode
that references the data block has been written.
Submitted by: Bill Fenner <fenner@research.att.com>
been unlinked (e.g., with a zero link count). We have to expunge
all trace of these files from the snapshot so that they are neither
reclaimed prematurely by fsck nor saved unnecessarily by dump.
which small and/or nearly full filesystems would fail with `file
system full' messages when trying to replace a number of existing
files (for example during a system installation). When the allocation
routines are about to fail with a file system full condition, they
make a call to softdep_request_cleanup() which attempts to accelerate
the flushing of pending deletion requests in an effort to free up
space. In the face of filesystem I/O requests that exceed the
available disk transfer capacity, the cleanup request could take
an unbounded amount of time. Thus, the softdep_request_cleanup()
routine will only try for tickdelay seconds (default 2 seconds)
before giving up and returning a filesystem full error. Under typical
conditions, the softdep_request_cleanup() routine is able to free
up space in under fifty milliseconds.
which caused incomplete snapshots to be taken. When background
fsck would run on these snapshots, the result would be files
being incorrectly released which would subsequently panic the
kernel with ``handle_workitem_freefile: inodedep survived'',
``handle_written_inodeblock: live inodedep'', and
``handle_workitem_remove: lost inodedep'' errors.
involving file removal or file update were not always being fully
committed to disk. The result was lost files or corrupted file data.
This change ensures that the filesystem is properly synced to disk
before the filesystem is down-graded.
This delta also fixes a long standing bug in which a file open for
reading has been unlinked. When the last open reference to the file
is closed, the inode is reclaimed by the filesystem. Previously,
if the filesystem had been down-graded to read-only, the inode could
not be reclaimed, and thus was lost and had to be later recovered
by fsck. With this change, such files are found at the time of the
down-grade. Normally they will result in the filesystem down-grade
failing with `device busy'. If a forcible down-grade is done, then
the affected files will be revoked causing the inode to be released
and the open file descriptors to begin failing on attempts to read.
Submitted by: "Sam Leffler" <sam@errno.com>
Seigo Tanimura (tanimura) posted the initial delta.
I've polished it quite a bit reducing the need for locking and
adapting it for KSE.
Locks:
1 mutex in each filedesc
protects all the fields.
protects "struct file" initialization, while a struct file
is being changed from &badfileops -> &pipeops or something
the filedesc should be locked.
1 mutex in each struct file
protects the refcount fields.
doesn't protect anything else.
the flags used for garbage collection have been moved to
f_gcflag which was the FILLER short, this doesn't need
locking because the garbage collection is a single threaded
container.
could likely be made to use a pool mutex.
1 sx lock for the global filelist.
struct file * fhold(struct file *fp);
/* increments reference count on a file */
struct file * fhold_locked(struct file *fp);
/* like fhold but expects file to locked */
struct file * ffind_hold(struct thread *, int fd);
/* finds the struct file in thread, adds one reference and
returns it unlocked */
struct file * ffind_lock(struct thread *, int fd);
/* ffind_hold, but returns file locked */
I still have to smp-safe the fget cruft, I'll get to that asap.
lost if some other process uses the lock while we are sleeping. We
restore it after we have slept. This functionality is provided by
a new routine interlocked_sleep() that wraps the interlocking with
functions that sleep. This function is then used in place of the
old ACQUIRE_LOCK_INTERLOCKED() and FREE_LOCK_INTERLOCKED() macros.
Submitted by: Debbie Chu <dchu@juniper.net>
in softdep_sync_metadata(). Otherwise we may miss dependencies
that need to be flushed which will result in a later panic
with the message ``vinvalbuf: dirty bufs''.
Submitted by: Matthew Dillon <dillon@apollo.backplane.com>
MFC after: 1 week
been removed from the cache-list as part of a previous unmount.
This would result in panics (page fault in dqflush()) during subsequent
umounts provided that enough distinct UID's to actually make the
hash do something are active.
This can probably explain a number of weird quota related behaviours.
PR: 32331 maybe more.
Reproduced by: Søren Schrørder <sch@cybercity.dk>
against VM_WAIT in the pageout code. Both fixes involve adjusting
the lockmgr's timeout capability so locks obtained with timeouts do not
interfere with locks obtained without a timeout.
Hopefully MFC: before the 4.5 release
superblock that is already set up to handle pointer types. This
fixes an accidental change in the superblock size on 64-bit platforms
caused by revision 1.24.
when taking a snapshot. The two time consuming operations are
scanning all the filesystem bitmaps to determine which blocks
are in use and scanning all the other snapshots so as to be able
to expunge their blocks from the view of the current snapshot.
The bitmap scanning is broken into two passes. Before suspending
the filesystem all bitmaps are scanned. After the suspension,
those bitmaps that changed after being scanned the first time
are rescanned. Typically there are few bitmaps that need to be
rescanned. The expunging of other snapshots is now done after
the suspension is released by observing that we can easily
identify any blocks that were allocated to them after the
suspension (they will be maked as `not needing to be copied'
in the just created snapshot). For all the gory details, see
the ``Running fsck in the Background'' paper in the Usenix
BSDCon 2002 Conference Proceedings, pages 55-64.
new file end will land in the middle of a file hole. Since the last
block of a file must always be allocated, the hole is filled by
allocating a block at that location. If the hole being filled is
a direct block, then the truncation may eventually reduce the
full sized block down to a fragment. When running with soft
updates, it is necessary to FSYNC the file after allocating the
block and before creating the fragment to avoid triggering a
soft updates inconsistency when the block unexpectedly shrinks.
Found by: Matthew Dillon <dillon@apollo.backplane.com>
MFC after: 1 week