Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.
Reviewed by: ngie@, gnn@, bdrewery@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9854
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
If WITH_LLD is disabled LLD is not built and cannot be installed as
/usr/bin/ld, so disable WITH_LLD_IS_LD.
Currently we do not compare the LLD host/in-tree version and LLD
requires the LLVM libraries to be built, so force WITH_SYSTEM_COMPILER
off when WITH_LLD_IS_LD is set.
The logic for bootstrapping LLD requires some tidying later. We should
be able to detect that the host linker is the same version and avoid
building LLD in the same way that WITH_SYSTEM_COMPILER handles Clang.
We also may be able to extend libllvmminimal to meet LLD's needs. For
now this change unbreaks buildworld with default settings except for
WITH_LLD_IS_LD.
Reported by: Shawn Webb
Reviewed by: bdrewery
Tested by: Shawn Webb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9487
With this change LLD will be built on the same set of architectures that
use Clang as /usr/bin/cc. It is not yet fully functional as a system
linker for i386 and arm, but is ready for further testing and
investigation.
Recent versions of Clang are becoming usable for non-x86 non-arm FreeBSD
architectures. If the compiler is capable of building Clang, do so in
order to facilitate further testing.
Reviewed by: dim, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8267
Running smilint against MIB definitions is useful in finding
functional problems with MIB definitions/descriptions.
This is inspired by the smilint targets defined in
usr.sbin/bsnmpd/modules/{snmp_hostres,snmp_mibII}/Makefile
Document all of the variables that are involved in running the
smilint target, as well as all of the prerequisites to running
it.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9099
For the case that someone set WITHOUT_GSSAPI=, now WITHOUT_KERBEROS_SUPPORT
will be properly set.
This will likely fix the issue for the default case noted in the PR I filed
back in 2011. I am trying to fix the less obvious case documented in the PR
still.
MFC after: 2 weeks
PR: 159745
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
This is reworking the change in r296585 but to still properly install
the files. This limits the change to only the DIRDEPS_BUILD logic
for what it considers the name of the staging set, which is what the
cookie name is based off of.
Sponsored by: Dell EMC Isilon
MFC after: 1 week
to create a repo during 'make packages'
This would have been useful for a situation I found myself in where
pkg(8) had been upgraded to a version that wanted the FBSD_1.5 ABI
version but libc.so.7 had not been upgraded, and only provided
FBSD_1.4. I found I needed to update libc in order to run pkg, and I
also needed to use pkg to update libc... Which is why pkg-static
exists, but there's currently no way to tell the build system to use
pkg-static instead of pkg.
This creates a variable PKG_CMD, default value 'pkg', that can be
overridden from the command line.
Reviewed by: gjb
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D8120
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
The tree can be build with an external toolchain that will not
necessarily default to desired settings, so we have to specify
the required flags explicitly to force the required compilation
mode.
Reviewed by: adrian, br
Sponsored by: https://reviews.freebsd.org/D8505
This allows 'make foo install' or 'make all install'. It is a similar
fix as r304697 did for reading dependency files.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
_SKIP_BUILD will be set when nothing is expected to be built. This can
be used to optimize some tree-walks and operations which don't need to
load dependency files or generate dependencies via beforebuild-style
hacks.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This was a mistake in r295641, but is effectively prevented from
being a problem due to r296699 preventing 'make all' from being
usable at MAKELEVEL 0 for DIRDEPS_BUILD.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Running `make libfoo.ll` or `make libfoo.bc` within a library directory
will now give us an LLVM IR version of the library, and `make foo.full.ll`
or `make foo.full.bc` will give us an IR version of a binary.
As part of this change, we add an LLVM_LINK variable to sys.mk that can be
specified/overridden using an external toolchain.
Reviewed by: bdrewery, brooks
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8388
In r307676, several make rules were added for LLVM IR files, both in
text and binary format. Unfortunately these use different suffixes from
what upstream uses:
* Text IR has upstream suffix ".ll", while r307676 uses ".llo"
* Binary IR has upstream suffix ".bc", while r307676 uses ".bco"
Change these to what upstream uses instead.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D8326
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
after r307676, which added transformation rules for .llo and .bco files.
These suffixes also have to be added the the global .SUFFIXES target,
otherwise the various suffix-transformation rules would be interpreted
as literal targets. E.g.,
.c.bco:
... commands ...
would actually to build a file named ".c.bco".
As a foundation for future work with LLVM's Intermediate Representation (IR),
add new suffix rules that can be used to build .llo (text) or .bco (bitcode)
files from C or C++ sources. This compilation step uses the same CFLAGS, etc.,
as are used for building .o files, with the exception of optimization flags.
Many of the things we would like to do with IR (e.g., instrumentation) work
better with unoptimized code, so our approach is to build .c->.bco without
optimization and then apply the optimization in post-analysis,
post-instrumentation linking.
The overall result of these changes is:
* one can "make foo.llo" or "make foo.bco" wherever "make foo.o" was supported
* new make variables IR_CFLAGS and IR_CXXFLAGS are available to inspect the
flags that are used by Clang to generate the IR
These new rules are added unconditionally to our non-POSIX suffix rule set,
since we cannot inspect COMPILER_TYPE in sys.mk. Future changes that depend
on these rules (e.g., building IR versions of binaries from bsd.prog.mk)
should use COMPILER_TYPE to determine when we can expect IR rules to succeed.
Reviewed by: emaste, imp
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D4339
This is added to facilitate experiments building FreeBSD without
copyleft software.
If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will
be built.
If WITHOUT_GNU_GREP is set then BSD grep will be installed as
/usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP
knob.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
This is currently encoded in conditional blocks in gnu/lib/Makefile and
gnu/usr.bin/Makefile. Set it via src.opts.mk to make GDB's dependency
on binutils more clear.
Refactor make suffix rules into separate files (one for POSIX and one not),
and rationalise the rules so that bsd.lib.mk can contain only those rules
that are library-specific (.c.po and .c.pico).
This can be accomplished by adding ${STATIC_CFLAGS} to the .c.o rule
unconditionally. STATIC_CFLAGS are only defined for use by sys.mk rules in
lib/libpam/Makefile.inc (see r227797), so it should be safe to include
them unconditionally in sys.mk's .c.o rule (tested by make universe and a
ports exp-run).
Reviewed by: bdrewery, sjg
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6805
the same API as the GPL'd version of this library. It implements the common
Linux API for programatically manipulating UEFI environment varibales using
the UEFI Runtime Services the kernel provides. It replaces the old efi
library since it is programmed to a different interface, but retails the
CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match
Linux program's expectations.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
build can break when different source files create the same target
files (case-insensitivity speaking). This is the case for object
files compiled with -fpic and shared libraries. The former uses
an extension of ".So", and the latter an extension ".so". Rename
shared object files from *.So to *.pico to match what NetBSD does.
See also r305855
MFC after: 1 month
Sponsored by: Bracket Computing
Differential Revision: https://reviews.freebsd.org/D7906
All remaining tools using rcs has been switched to directly use diff3(1):
- etcupdate(8)
- freebsd-update(8)
Note that the ident(1) tool is been already replaced long ago with a BSD
licensed version, as such it remains installed.
GNU rcs is still available from ports:
- rcs: newer GPLv3 version
- rcs57: the latest version from base (GPLv2)
This was possible if a STANDALONE_SUBDIR_TARGET item came in
SUBDIR_TARGETS before 'all', which would then cause SUBDIR to
have all .WAIT's removed.
Sponsored by: Dell EMC Isilon
Take advantage of new bmake feature to only consider Makefile.depend
as invalidating DIRDEPS_CACHE.
When bootstrapping allow more filtering via .MAKE.DEPENDFILE_BOOTSTRAP_SED
Move some comments back to where they make sense.
meta.sys.mk: add META_COOKIE_TOUCH and META_NOPHONY to better handle some
targets in meta mode vs non-meta mode.
Also use .MAKE.META.IGNORE_PATHS to ignore mtime of makefiles - which do
not matter in meta mode.
this library. Sticking to 'libifconfig' (and 'ifconfig_' as function prefix)
should reduce chances of namespace collisions, make it more clear what the
library does, and be more in line with existing libraries.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D7742
Reviewed by: cem, kp
- DIRDEPS_BUILD: Fix crunchgen builds losing their library dependencies
on a nop-rebuild.
- META_MODE: Fix not rebuilding various crunch.mk targets if their .meta
files warrant a rebuild. They were lacking .meta files previously.
This adds .NOMETA to the crunch objects being used since they are
already built. Bmake was forcing a rebuild on them since their
.meta files were not in the expected place; there is no reason to
rebuild them.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
These nested directories are not build targets. They just map back to
lib/clang/lib{clang,llvm,llvmminimal,lldb}. Avoid adding these nested
directories into Makefile.depend.
Sponsored by: EMC / Isilon Storage Division
- For FAST_DEPEND, properly apply the -M flags when compiling by
enduring that the condition also has the s,/,_,g filter applied to it
first.
- For FAST_DEPEND, properly read from the filtered filename.
- For META_MODE, it needs to read from a full-pathed and s,/,_,g replaced
filename based on bmake's meta_name() function which names the .meta
file for SRCS with '/' in them.
This support has not been extended to the kernel build yet but may be in the
future.
MFC after: 2 weeks
Reported by: dim
Sponsored by: EMC / Isilon Storage Division
Use this to control inclusion of the libllvm functionality required
by lld. Enable by default on arm64 and amd64, the two platforms where
lld is most usable for testing.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7713
This is to be used by the new clang3.9 build and extends functionality
added to 'make obj' in r279980.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
libifc (pronounced lib-ifconfig) aims to be a light abstraction layer between
programs and the kernel APIs for managing the network configuration.
This should hopefully make programs easier to maintain, and reduce code
duplication.
Work will begin on making ifconfig(8) use this library in the near future.
This code is still evolving. The interface should not be considered stable until
it is announced as such.
Submitted By: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D7529
An optimization is in place to skip reading the .depend.* files with
'make install'. This was too strong and broke 'make all install' and
'make foo.o foo install'. Now only skip reading the dependency files
if all make targets ran are install targets.
The problem comes about because headers are only added in as a guessed
dependency if .depend.* files do not yet exist. If they do exist, even
if being skipped from being read, then the header dependencies are not
applied. This applies to all #included files, and not just headers.
Reported by: kib
MFC after: 1 day
Sponsored by: EMC / Isilon Storage Division
relative paths, also create them for DPSRCS. This is needed for builds
that generate files during the depend stage, which cannot be compiled by
themselves, since those have to be put in DPSRCS.
This was disabled in r301468 due to -target/--sysroot sometimes being used in
the build and other times not being used. Now that it is always used since
r304681, it is safe to combine the features.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
This fixes parallel build issues when trying to depend on ${SUBDIR}. An
example of this in share/i18n/csmapper/Makefile where mapper.dir depends
on ${SUBDIR} having been traversed and built already. Before this
change running make in that directory would build the subdirectories
twice. This led to obscure build races. While reworking that build
may be possible, the framework should not so easily allow creating such
problems.
Now depending on <directory> will properly redirect to the
all_subdir_<directory> target rather than invoking the inline shell.
This also makes 'make -jX <directory>' now respect any
SUBDIR_DEPEND_<directory> statements when SUBDIR_PARALLEL is defined.
This is not entirely intended and may be changed later.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is part of an effort to cleanup handling of some edge cases
involving 'make <directory>'. It also provides the targets for
other uses.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This is unifying more of the logic. Rather than create targets such
as 'all: all_subdir_foo' when using SUBDIR_PARALLEL and using
'all: _SUBDIR' when not using SUBDIR_PARALLEL, always use the
expanded out <target>_subdir_<directory> pattern. When not using
SUBDIR_PARALLEL, have each directory-target depend on the previously
defined targets as to respect the *order* of SUBDIR.
Using 'make -N' now prints all directory traversals individually rather
than using a loop, since a loop is no longer used to traverse.
This is part of an effort to cleanup handling of some edge cases
involving 'make <directory>' and making it simpler in the sense
that the pattern used to build is the same for all modes.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Several atf components require C++, and the test suite is not usable
if building WITHOUT_CXX.
Reviewed by: bdrewery, jmmv
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7597
This is used by libdtrace to determine the data model of target processes.
This allows for the creation of pid provider probes in 32-bit processes on
amd64.
MFC after: 1 month
Previously, librtld_db just hardcoded /libexec/ld-elf.so, which isn't
correct for processes that aren't using the native ABI. With this change,
librtld_db can be used to inspect non-native processes; in particular,
dtrace -c now works for 32-bit executables on amd64.
MFC after: 1 month
It is a maintained and updated runtime exception stack unwinder that
should be a drop-in replacement.
It can be disabled by setting WITHOUT_LLVM_LIBUNWIND in src.conf.
PR: 206039 [exp-run]
Sponsored by: The FreeBSD Foundation
It was added to sys.mk relatively recently (r274503) for EFI builds
but is no longer used by the base system. The in-tree binutils are
outdated, will not be updated, and will be removed in the future.
Remove it from the toolchain build now to slightly simplify the build
and make sure we don't grow an accidental dependency.
Note that this affects only the toolchain build, and does not affect
/usr/bin/objdump in the built world.
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6460
This also adds missing s/aarch64/arm64 to the sys.mk version and also
adds back armv6hf for universe since it was added to the sys.mk version
in r300438.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7159
This improves buildworld, toolchain, kernel-toolchain, and universe targets.
See r300354 or src.conf(5) for more details.
Approved by: re (gjb)
Relnotes: yes (r300354)
Sponsored by: EMC / Isilon Storage Division
kgzldr.o is installed into /usr/lib but using bsd.prog.mk. Add
/usr/lib to the base system directory list so that debug files are
installed into /usr/lib/debug/usr/lib, not /usr/lib/.debug .
Approved by: re (gjb)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The DPADD data in .depend will be redundant with what is in the .meta file.
Also extend NO_EXTRADEPEND support to bsd.prog.mk.
Approved by: re (blanket, META_MODE)
Sponsored by: EMC / Isilon Storage Division
This is mostly fixing META_MODE with realinstall wanting a .meta
file when it does not need one. These targets really should
always run though since they have _SUBDIR on them.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- This was broken by r300350 and r300885.
- Add some comments around the external GCC logic since it is spread out
and in need of some cleanup.
- The problem was that X_COMPILER_TYPE is always defined from CC->XCC's
default, so if /usr/bin/cc is GCC (as it is on native powerpc64) then
X_COMPILER_TYPE was getting GCC and triggering the external logic in
Makefile.libcompat. It was intended to always provide -isystem with
GCC since --sysroot is used into the lib32 sysroot which won't modify
the header path without the -isystem. The use of the libc++/std=c++11
override was only intended to be used for external compilers though
(more accurately GCC 4.8+ but that's a separate assumption to
cleanup). Apply the same logic from Makefile.inc1 to Makefile.libcompat
to only add the libc++ override when needed for external compilers.
Pointyhat to: bdrewery
Tested with: native ppc64 (swills), universe, ppc64 xtoolchain,
amd64 xtoolchain, sparc64 cross-build of ppc64 (host GCC 4.2)
Reported by: andreast, swills
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
Due to META_MODE being passed into the environment it tends
to keep growing with the defaults.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r300343.
This is important for the OBJS_DEPEND_GUESS usage in
gnu/usr.bin/cc/cc_tools.
See comments for more details.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This is important to allow a Makefile to override OBJS_DEPEND_GUESS for
handling in META_MODE when its depend files are missing.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This will print a set of variables from make on error using
MAKE_PRINT_VAR_ON_ERROR. It is already enabled for the DIRDEPS_BUILD.
It may make sense to enable this in the non-meta mode as well once
people are more used to its more verbose error output.
This makes it much simpler to see which .meta file is used when a
command files so that it may be inspected for the build command.
Suggested by: sjg
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
Using -B already sets .MAKE.MODE=compat but it was leaving
MK_META_MODE set which could still cause other MK_META_MODE==yes
checks to trigger.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
A simplified example of the library targets with WITH_DEBUG_FILES is:
libgeom.so.5: libgeom.so.5.full
cp libgeom.so.5.full libgeom.so.5
libgeom.so.5.full:
ln -s libgeom.so.5 libgeom.so
cc -o libgeom.so.5.full *.o
Before, or without, WITH_DEBUG_FILES it is:
libgeom.so.5:
ln -s libgeom.so.5 libgeom.so
cc -o libgeom.so.5 *.o
The problem is that bmake considers the link source for the libgeom.so
link in the libgeom.so.5.full target as being a dependency for
libgeom.so.5.full. That resolves to libgeom.so.5. Thus a cyclic
dependency is created. The result of this is that if libgeom.so.5 is
created with a newer timestamp than libgeom.so.5.full, then
libgeom.so.5.full will be rebuilt on the next build. This causes a
chain reaction of everything in the build relinking, or hitting the
problem itself.
Moving the link creation to the target that actually creates
libgeom.so.5 fixes the problem. The simplest fix here is to just
duplicate the logic.
Submitted by: sjg
Approved by: re (implicit)
The WITH_META_MODE build is intended to be a working incremental build.
It spies on the build command to see if things should be rebuilt if the
command changes. If you run buildworld, it builds a cross-compiler,
then do installworld and buildworld again it will invoke the
WITH_SYSTEM_COMPILER logic. This then adds on -target/--sysroot, etc,
and causes rebuilds due to the changed build command even though the
compiler used is technically the same revision. Since the incremental
build is not cleaning anything by default then there is much
less risk to rebuilding the already-existing cross-compiler. Just
disable the combined logic and always use and build the cross-compiler.
An alternative to this would be to always pass -target/--sysroot. Doing
so may occur in the future.
Sponsored by: EMC / Isilon Storage Division
Using buildworld, installworld, buildworld. It is expected that nothing
should rebuild. However any host tool used could have its timestamp
updated. Any library used by dynamic tools could have its timestamp
updated. The filemon(4) data in the .meta files captures all reads to
these files. This causes the 2nd buildworld to rebuild everything since
host tools and files have been updated.
Because the build is self-reliant and bootstraps itself, it should be
safe to ignore mtime changes on host files used during the build. Host
files should only impact the build of legacy, build-tools, bootstrap-tools,
cross-tools, but those are already intended to be reproducible from its
own bootstrapping. It is possible in a rare case that a bug in a host
file does produce a broken build tool. If that happens it will just
have to be communicated properly.
An alternative solution would be to update the mtime of all files in the
object directory after installworld so that the host files are not newer
than the object files. That also requires special care for read-only
obj directories and special care to not mess with any intended timestamps in
the build, such as done for reproducibility.
Reported by: many
Sponsored by: EMC / Isilon Storage Division
Ccache will not affect the output of the objects, so just ignore it for
meta mode handling. This avoids having everything rebuild if ccache is
updated.
Sponsored by: EMC / Isilon Storage Division
The first file in these lists will generate everything else so only
it should be getting a .meta file. With bmake's missing=yes meta
feature these would otherwise cause a rebuild without the
.NOMETA hint.
Sponsored by: EMC / Isilon Storage Division
This breaks cross-building with WITH_META_MODE since it will rebuild
'build-tools' during the 'everything' phase.
A more proper fix is coming to bmake to implicitly require .META unless
.NOMETA (and other restrictions) are in place.
for the CONFS issue with dma.conf and ppp.conf.
Thank you very much to Bryan Drewery for looking into the
problem and providing this fix.
Pointyhat: gjb
Sponsored by: The FreeBSD Foundation
Since META_MODE is being sold and used as a working incremental build, it won't
make much sense if filemon data is excluded. There is no way to recover
from that in a subsequent build.
Sponsored by: EMC / Isilon Storage Division
Adding .META to targets-to-build will ensure that they will rebuild if there
is no .meta file.
Adding it to all SUFFIXES and objects ensures that at least objects will
rebuild if there is no .meta file.
This will be reverted if bmake's behavior changes to rebuild on missing .meta
files.
Sponsored by: EMC / Isilon Storage Division
The C++ header files must be searched before /usr/include.
The original code in Makefile.inc1 did this before the change in r297271 to
use -isystem. The libc++ import in r300770 fixed the bug introduced in
r297271 by swapping XCFLAGS and XCXXFLAGS ordering in CROSSENV.
Moving the code from Makefile.inc1 to bsd.sys.mk in r300886 also made it
more difficult to control the order of the flags. CXXFLAGS is based on
CFLAGS, so any additions to it will come after CFLAGS. The CROSSENV
code from Makefile.inc1 was such that it was ensured the CXXFLAGS came
first by setting them directly in CXX. Using CXXFLAGS+=-I would work
here, but instead continue to use -isystem by adding it to CXX so it
comes before CFLAGS.
Reported by: dim
Add zfsd, which deals with hard drive faults in ZFS pools. It manages
hotspares and replements in drive slots that publish physical paths.
cddl/usr.sbin/zfsd
Add zfsd(8) and its unit tests
cddl/usr.sbin/Makefile
Add zfsd to the build
lib/libdevdctl
A C++ library that helps devd clients process events
lib/Makefile
share/mk/bsd.libnames.mk
share/mk/src.libnames.mk
Add libdevdctl to the build. It's a private library, unusable by
out-of-tree software.
etc/defaults/rc.conf
By default, set zfsd_enable to NO
etc/mtree/BSD.include.dist
Add a directory for libdevdctl's include files
etc/mtree/BSD.tests.dist
Add a directory for zfsd's unit tests
etc/mtree/BSD.var.dist
Add /var/db/zfsd/cases, where zfsd stores case files while it's shut
down.
etc/rc.d/Makefile
etc/rc.d/zfsd
Add zfsd's rc script
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c
Fix the resource.fs.zfs.statechange message. It had a number of
problems:
It was only being emitted on a transition to the HEALTHY state.
That made it impossible for zfsd to take actions based on drives
getting sicker.
It compared the new state to vdev_prevstate, which is the state that
the vdev had the last time it was opened. That doesn't make sense,
because a vdev can change state multiple times without being
reopened.
vdev_set_state contains logic that will change the device's new
state based on various conditions. However, the statechange event
was being posted _before_ that logic took effect. Now it's being
posted after.
Submitted by: gibbs, asomers, mav, allanjude
Reviewed by: mav, delphij
Relnotes: yes
Sponsored by: Spectra Logic Corp, iX Systems
Differential Revision: https://reviews.freebsd.org/D6564
This fixes CROSS_TOOLCHAIN builds after r300886 since it
relies on X_COMPILER_TYPE being set.
The X_* vars will only represent the external compiler
being used.
Sponsored by: EMC / Isilon Storage Division
This allows respecting -nostdinc, -nostdinc++ and -nostdlib before
making the decision to add in -isystem, etc. The -isystem flags
are problematic for building lib/libc++ and lib/libcxxrt which wants
to only use its own headers.
More information the need of these flags can be found at
https://gcc.gnu.org/ml/gcc/2016-03/msg00219.html
This also reverts r300873.
Sponsored by: EMC / Isilon Storage Division
Passing MAKEOBJDIRPREFIX to the main prog build (rescue) would confuse
WITH_AUTO_OBJ and cause it to create a recursed object directory that
then broke the actual prog build. This is normally not a problem since
we do not call 'make -f prog.mk obj' before building anything in it.
Crunchgen(1) also assumes that if -o is not passed then if an object
directory does not already exist then it should build in the source
directories. The normal buildworld process will have already ran 'make
obj' in each of the component directories so this is not a problem.
With WITH_AUTO_OBJ though this is not the case. So we must tell
crunchgen(1) that MK_AUTO_OBJ=yes will create the directory and to not
require it be present before generating its Makefile.
Sponsored by: EMC / Isilon Storage Division
This would otherwise disallow using meta files from a foreign build that
spread them around in directories outside our own .OBJDIR.
Sponsored by: EMC / Isilon Storage Division
The main prog has a dependency on the submake targets to ensure they are
built. From bsd.crunchgen.mk though we already have our own dependency
on 'make objs' so there is no need for another one. Crunchgen(1) is
doing the right thing here so it is not modified.
This also prevents the CC fix tainting the submake environment with
META_MODE and causing rebuilds. The CC passed is is only intended for
the main prog itself.
Sponsored by: EMC / Isilon Storage Division
This fixes --sysroot and other CFLAGS/LDFLAGS not being respected
in the crunchgen build since it is not including bsd.sys.mk and
other files. For example, this fixes building rescue itself without
--sysroot and other CFLAGS.
Sponsored by: EMC / Isilon Storage Division
Since multiple files are generated from one build command, only
the first to run will actually generate a .meta file. This fix
prevents 'required but missing' rebuilds on each target.
Sponsored by: EMC / Isilon Storage Division
Because bmake defaults to .../share/mk now, this code was not doing anything
to help objdir builds (such as the rescue build). Export the same default.
Sponsored by: EMC / Isilon Storage Division
It turns out we need to leave this in place for a while so that people
running self-hosting armv6hf systems can do the builds necessary to update
to armv6 (which is now hardfloat by default).
This will still build the compiler for the target but will not build the
bootstrap cross-compiler in the cross-tools phase. Other toolchain
bootstrapping, such as elftoolchan and binutils, currently still occurs.
This will utilize the default CC (cc, /usr/bin/cc) as an external compiler.
This is planned to be on-by-default eventually.
This will utilize the __FreeBSD_cc_version compiler macro defined in the
source tree and compare it to CC's version. If they match then the
cross-compiler is skipped. If [X]CC is an external compiler (absolute
path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped.
If the expected bootstrap compiler type no longer matches the found CC
compiler type (clang vs gcc), then the logic is skipped. As an extra
safety check the version number is also compared from the compiler to
the tree version.
Clang:
The macro FREEBSD_CC_VERSION is defined in:
lib/clang/include/clang/Basic/Version.inc
For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This
is from the current external toolchain logic. There is currently an
assumption that the host compiler can build the TARGET_ARCH. This
will usually be the case since we don't conditionalize target arch
support in clang, but it will break when introducing new
architectures. This problem is mitigated by incrementing the version
when adding new architectures.
GCC:
The macro FBSD_CC_VER is defined in:
gnu/usr.bin/cc/cc_tools/freebsd-native.h
For GCC there is no simple -target support when TARGET_ARCH !=
MACHINE_ARCH. In this case the opportunistic skip is not done. If we
add proper support for this case in external toolchain logic then it
will be fine to enable.
This relies on the macros being incremented whenever any change occurs
to these compilers that warrant rebuilding files. It also should never
repeat earlier values.
Reviewed by: brooks, bapt, imp
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6357
See r298220 for more explanation. We don't want to prevent installing
if a cookie exists for the install target.
Sponsored by: EMC / Isilon Storage Division
This is the same problem as r290629. With META_MODE we do not generate
.depend files, so there is no proper dependency to lookup. Guessed
dependencies must be used. If this proves to be a problem then we will
have to generate and use .depend files even with META_MODE.
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r299289. If the user did not run bootstrap-tools
for this directory then just build the tool as normal. It assumes that
TARGET == MACHINE, but that was already the case before r299289.
Sponsored by: EMC / Isilon Storage Division
We want to avoid .text relocations in shared objects. libcrypto was the
only consumer and it is now fixed (as of r299389). Remove the now-unused
support for turning off the linker warning.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D6323
Kernel installs always override KMODDIR when installing modules, so
this default setting is only used for standalone module builds. Many
out-of-tree modules manually override KMODDIR already to avoid placing
modules in /boot/kernel. This now makes that behavior the default.
Discussed on: arch@
Reviewed by: imp
Relnotes: yes
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Otherwise the build command changes every build. META_MODE will
only remove it if something changes to warrant rebuilding
the file.
Sponsored by: EMC / Isilon Storage Division
dirdeps.mk: move logic to handle -f dirdeps.mk to inside check
for first read of dirdeps.mk
Also fix handling of WITHOUT_DIRDEPS_BELOW
gendirdeps.mk: pass M2D_EXCLUDES to meta2deps
meta.autodep.mk: if we build with nofilemon, leave a cookie to
prevent updating dependencies until cleaned.
Reviewed by: bdrewery
This is limited to src-tree builds, meaning not extended to ports or other
out-of-tree builds.
This will help ensure that read-only OBJDIRS will be respected at install-time
by causing a more consistent failure for those who don't use a read-only
OBJDIR. It also will cause Jenkins to yell. This is a better solution than
trying to see CC=false as has been attempted and discussed before.
Of course this is only relevant for files generated by CC.
Disable this for META_MODE since it will detect the CFLAGS/command
change and force a rebuild.
Sponsored by: EMC / Isilon Storage Division
Prefix with dashes (unordered list) and put one variable on each
line (to avoid future conflicts)
Done via the following one-liner:
> sh -c 'for i in $(make -C tests/sys/aio PROG=foo -VPROG_VARS:O); do printf "\t\t- $i\n"; done'
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will allow the variables [*] to be overridden on a per-PROG basis,
which is useful when controlling "stripping" behavior for some tests
that require debug symbols or to be unstripped
DEBUG_FLAGS (similar to CFLAGS) supports appending, whereas STRIP is
an override
*: Due to how STRIP is defined in bsd.own.mk (in addition to
bsd.lib.mk and bsd.prog.mk), and the fact that bsd.test.mk pulls in
bsd.own.mk first, overriding STRIP doesn't work today.
A follow up commit is pending to "rectify" this after additional
testing is done.
Discussed with: bdrewery
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This happened to work for not prepending .OBJDIR twice but broke the
other case of prepending it when needed.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
This will only be done if the target is defined, so if the target is
defined after bsd.sys.mk is included then it needs to manually add
${META_DEPS} still.
Sponsored by: EMC / Isilon Storage Division
MAKEOBJDIRPREFIX is set to blank and exported from MAKELEVEL0 along
with OBJROOT exported. In sub-makes OBJROOT is recalculated with
an empty MAKEOBJDIRPREFIX though.
Sponsored by: EMC / Isilon Storage Division
This overrides the cross-compiler's default sysroot to use the WORLD32's
sysroot for building the lib32 libraries. Previously the cross-compiler
would default the sysroot to the 64bit WORLDTMP and -B/-L/-isystem flags
were used to build using the lib32 files. This leads to multiple issues
discussed later. Some extra headers are now needed to be staged since the
64bit WORLDTMP is not referenced at all for headers. The 64bit WORLDTMP
is still used via PATH for build tools. Overriding the default
target/arch is retained in the CC/CXX overrides.
This allows reverting the LDSCRIPT rewriting in installworld from r296921 and
r235122, thus allowing read-only objdirs to work for installing again.
This removes the need for _LDSCRIPTROOT.
This allows progressing the change to always use --sysroot for the build
rather than only relying on the cross-compiler's default sysroot. The
work for that is in D3970 and needed to resolve WITHOUT_CROSS_COMPILER
not using a --sysroot [1].
PR: 196193 [1]
Sponsored by: EMC / Isilon Storage Division
Archive member handling works again
meta mode, treat missing reads as for writes.
Update dirdeps.mk - much improved startup time.
Update meta.stage.mk - avoid ln when chmod required.
Specifically this fixes /usr/lib/libc.so stripping the paths to the
libraries. The reason for this in r266227 was both likely because ld(1) did
not fully respect --sysroot until r291226 and because of the lib32
build. The lib32 build does not use --sysroot into the /usr/lib32 path,
rather it only uses -L and -B into the /usr/lib32 path and --sysroot
into the normal (64bit) /usr/lib. The _LDSCRIPTROOT was added with
the ldscript support in bsd.lib.mk so that it builds a 32-bit-sysrooted pathed
ldscript in the object directory and then installs a normal unprefixed
version in installworld. This commit also fixes the rebuild during
install which was broken in r266227. This commit would break DIRDEPS_BUILD
build of lib32 but it does not currently have a way to build it anyhow.
For example, before this change we had in /usr/lib/libc.so:
GROUP ( libc.so.7 libc_nonshared.a libssp_nonshared.a )
Now it is restored to pre-r266227:
GROUP ( /lib/libc.so.7 /usr/lib/libc_nonshared.a /usr/lib/libssp_nonshared.a )
The motivation for this is in testing of lld.
From emaste:
lld does not have built-in search paths (e.g. /lib, /usr/lib) and relies on
-L arguments passed by the caller. As the linker is nearly always invoked
from the clang driver this is fine other than the fact that /usr/lib/libc.so
is an ldscript that refers to libc.so.7 which is in /lib, not /usr/lib.
PR: 207980
Reported by: emaste
Submitted by: emaste (based on)
Differential Revision: https://reviews.freebsd.org/D5637
No functional change.
This prevents adding empty targets to the main called target which is
confusing for debugging.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Extend it to other cases of meta mode cookies so they get the proper rm
cookie behavior when a .meta file detects it needs to rebuild and fails.
Sponsored by: EMC / Isilon Storage Division
This obsoletes the _SKIP_BUILD check but keeps it for now until it
proves to be enough.
In the dirdeps build the first 'make all' or 'make' ran would invoke
'make dirdeps' which builds dependencies and then builds the current
directory in a sub-make (when BUILD_AT_LEVEL0 is no, which for us it
is). This behavior causes things attached to 'all:' to build in the
dirdeps phase AND the sub-make phase which creates all kinds of problems
for staging, meta file tracking, and races.
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r291561 which reworked the bootstrap tool PATH
handling.
An example of this is when building lib/clang/libclangedit. At first
clang-tblgen will not be staged in the host tree so it will have
CLANG_TBLGEN=clang-tblgen set and exported. During the build though it
will stage clang-tblgen and then find it via the PATH. On the next
build it finds clang-tblgen in the stage directory and would set
CLANG_TBLGEN=<stagedir/usr/bin>/clang-tblgen thus causing the build
command to change. In both cases the same exact tool was used though so
there is no need to rebuild. If the tool did change the normal
meta/filemon handling would pick that up via timestamp comparisons and
rebuild.
Sponsored by: EMC / Isilon Storage Division
An example of where this is needed is in share/examples which for
'etc-examples' runs 'make -C SRCTOP/etc etc-examples' which installs
to the default DESTDIR otherwise.
Sponsored by: EMC / Isilon Storage Division
This came in r239572 for META_MODE handling but it doesn't make sense
since the staging is always done in make(all); make(buildincludes)
is never actually ran in the META_MODE build.
Reported by: bapt
Sponsored by: EMC / Isilon Storage Division
The meta file may decide the target is out of date but nothing
ensures that the *next* build will build this target if it
fails this time for some reason; it is still out-of-date
until it succeeds.
Convert the include/ cookie usage to the global versions.
Sponsored by: EMC / Isilon Storage Division
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
One example is in cddl/usr.sbin/dtrace/tests/common/aggs. It could be
fixed but other uses of this would break, especially in the
DIRDEPS_BUILD which uses the group names for stage cookies.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will allow Makefile.depend to properly capture all dependencies.
It is not 100% optimal but works. Other options would be to use *.meta
here which would include too much or to keep a Makefile.depend per PROG
and include it from the main Makefile.depend which would not be
straight forward.
Sponsored by: EMC / Isilon Storage Division
There is no good way to guess if any of these will be needed but
they commonly are and add no extra overhead so just stage them.
Sponsored by: EMC / Isilon Storage Division
Currently the base.txz distribution does not get the BSD.debug.dist mtree
extracted into it. So if you start from that and then try to build a 3rd-party
application outside of buildworld it will by-default try installing the
debug files into a missing directory if they are being installed into /usr/lib.
Check for the existence before forcing the directory to be created rather than
the older way of running a shell command with test -d || mkdir -p always.
Reported by: HardenedBSD (https://github.com/HardenedBSD/secadm/issues/23)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5411
This was a regression in r295985.
bsd.dep.mk adds to SRCS for dtrace probes, yacc grammars and some
others.
The code that is moving is planned to be removed once FAST_DEPEND is
default (and the only option) though since FAST_DEPEND doesn't use this.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
