requested, or none, and in the latter case it is up to them to pick a
smaller request to make - which they always do by halving the failed
request. This change to swp_pager_getswapspace leaves the task of
downsizing the request to the function and not its caller. It still
does so by halving the original request.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20228
change the binary search so that it does not depend on a single bit
only being set in the bitmask. Use bitpos more generally, and avoid
some clearing of bits to accommodate its current behavior.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20237
No functional change.
tun_flags of the tuntap_driver was renamed to ident_flags to reflect the
fact that it's a subset of the tun_flags that identifies a tuntap device.
This maps more easily (visually) to the TUN_DRIVER_IDENT_MASK that masks off
the bits of tun_flags that are applicable to tuntap driver ident. This is a
purely cosmetic change.
Boot-time netdump configuration is much more useful if one can configure the
client and gateway addresses. Fix trivial typo.
(Long-standing bug, I believe it dates to the original netdump commit.)
Spotted by: one of vangyzen@ or markj@
Sponsored by: Dell EMC Isilon
change the binary search so that it does not depend on a single bit
only being set in the bitmask. Use bitpos more generally, and avoid
some clearing of bits to accommodate its current behavior.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20232
Prior to this revision, struct diocskerneldump_arg (and struct netdump_conf
with embedded diocskerneldump_arg before r347192), were copied in their
entirety to the global 'nd_conf' variable. Also prior to this revision,
de-configuring netdump would *not* remove the the key material from global
nd_conf.
As part of Encrypted Kernel Crash Dumps (EKCD), which was developed
contemporaneously with netdump but happened to land first, the
diocskerneldump_arg structure will contain sensitive key material
(kda_key[]) when encrypted dumps are configured.
Netdump doesn't have any use for the key data -- encryption is handled in
the core dumper code -- so in this revision, we no longer store it.
Unfortunately, I think this leak dates to the initial import of netdump in
r333283; so it's present in FreeBSD 12.0.
Fortunately, the impact *seems* relatively minor. Any new *netdump*
configuration would overwrite the key material; for active encrypted netdump
configurations, the key data stored was just a duplicate of the key material
already in the core dumper code; and no user interface (other than
/dev/kmem) actually exposed the leaked material to userspace.
Reviewed by: markj, rpokala (earlier commit message)
MFC after: 2 weeks
Security: yes (minor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20233
This uses m_dup_pkthdr() to copy all of the metadata about a packet to
each of its fragments including VLAN tags, mbuf tags, etc. instead of
hand-copying a few fields.
Reviewed by: bz
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20117
the same thing, but is commented so that it might be better
understood.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20231
Since we now have a much larger KVA on powerpc64, it's possible to get SLB
traps earlier in boot, possibly even before the HIOR is properly configured
for us. Move the HIOR setup to immediately after reset, so that we use our
exception handlers instead of Open Firmware's.
PR: 233863
Submitted by: Mark Millard (partial)
Reported by: Mark Millard
MFC after: 2 weeks
and the next one, and if blocks are allocated from the next leaf, it
walks back toward where it started, as long as there are interleaving
meta-nodes to be updated on account of the last free blocks under
those meta-nodes being allocated. Only if the walk goes all the way
back to the starting point must we calculate the position of the
meta-node that is the least-comment parent of one leaf and the next,
and update a bit in that meta-node to indicate the allocation of its
last free block.
There's no need to start calculating the position of that least-common
parent until the walk back reaches the original starting point, and
there's no need for a calculation that updates 'radius' to tell us
when we've walked back to the beginning, since comparing scan to next
suffices for that.
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20229
Generate the ilinks for all dependency objects not just the ones
in the CLEAN list.
Possibly related to r345351
Reported by: kmoore
MFC after: 2 weeks
X-MFC-with: r345351
Sponsored by: Dell EMC Isilon
We used to put every PLL in normal mode (meaning that the output would
be the result of the PLL configuration) instead of slow mode (the output
is equal to the external oscillator frequency, 24-26Mhz) but this doesn't
work for most of the PLLs as when we put them into normal mode the registers
configuring the output frequency haven't been set.
Add a normal_mode member in clk_pll_def/clk_pll_sc struct and if it's true
we then set the PLL to normal mode.
For now only set it to the LPLL and BPLL (Little cluster PLL and Big cluster
PLL respectively).
Reviewed by: ganbold
Differential Revision: https://reviews.freebsd.org/D20174
We do this for FDT systems but not for ACPI ones.
Check the presence of the _CCA attribute.
Sponsored by: Ampere Computing, LLC
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D20144
Bind the TCP pacer threads to NUMA domains and build per-domain
pacer-thread lookup tables. These tables allow us to use the
inpcb's NUMA domain information to match an inpcb with a pacer
thread on the same domain.
The motivation for this is to keep the TCP connection local to a
NUMA domain as much as possible.
Thanks to jhb for pre-reviewing an earlier version of the patch.
Reviewed by: rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20134
So do nothing in pmap_page_set_memattr() and don't panic.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20209
DTrace expects kernel function symbols of a non-zero size to have an
implementation, which is a reasonable invariant to preserve.
Reported and tested by: ler
Reviewed by: cem, kib
Approved by: so (delphij)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20218
When the module is unloaded, the tty devices are destroyed. That requires
implementing the tsw_free callback to avoid a panic. This driver requires
no particular cleanup to be done from the callback, but the module itself
must remain in memory until the deferred tsw_free callbacks are invoked.
These changes implement that by incrementing a reference count variable in
the detach routine, and decrementing it in the tsw_free callback. The
MOD_UNLOAD event handler doesn't return until the count drops to zero.
PR: 237758
From Jake:
A user may set a sysctl to override the default number of Tx or Rx
descriptors. However, certain calculations in the iflib core expect the
number of descriptors to be a power of 2.
Update _iflib_assert to verify that all of the shared context parameters
for the number of descriptors are powers of 2.
Modify iflib_reset_qvalues to check that the provided isc_nrxd value is
a power of 2. If it's not, print a warning message and then use the
default value.
An alternative might be to try rounding the number down instead.
However, this creates problems in case the rounded down value is below
the minimum value that the driver would support.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: marius@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19880
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.
Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.
Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module
Reviewed by: cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision: https://reviews.freebsd.org/D20163
This add ability to automatically load ipsec kernel module, when
if_ipsec(4) virtual interface is created using ifconfig(8).
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20169
This adds initial support for RFC 2883.
Submitted by: Richard Scheffenegger
Reviewed by: rrs@
Differential Revision: https://reviews.freebsd.org/D19334
This is descrined in RFC 6582, which updates RFC 3782.
Submitted by: Richard Scheffenegger
Reviewed by: lstewart@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17614
lookup KPI in ip_output() like it is already used in ip_forward().
However, when there is no PCB provided we can use fast KPI, gaining
performance advantage.
Typical case when ip_output() is called without a PCB pointer is a
sendto(2) on a not connected UDP socket. In practice DNS servers do
this.
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D19804
Maintain symmetry with nvme_ctrlr_create_qpairs, making it easier to
match init/uninit scenarios.
Signed-off-by: John Meneghini <johnm@netapp.com>
Submitted by: Michael Hordijk <hordijk@netapp.com>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D19781
loaded OS.
This should prevent at least some theoretical issues whith code
execution on HT sibling of the core where the update is loaded.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20201
dme(4) is the built-in NIC on a couple non-expandable mips platforms and
thus should remain. The FCP has been updated to reflect this fact.
Discussed with: imp
when they end up being unused.
Reviewed by: kib
Obtained from: OpenBSD
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D20185
- there is no need to take the process lock to iterate the thread
list after single-threading is enforced
- typically there are no mutexes to clean up (testable without taking
the global umtx lock)
- typically there is no need to adjust the priority (testable without
taking thread lock)
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20160
* Make mmu_booke_sync_icache() use the DMAP on 64-bit prcoesses, no need to
map the page into the user's address space. This removes the
pvh_global_lock from the equation on 64-bit.
* Don't map the page with user-readability on 32-bit. I don't know what the
chance of a given user process being able to access the NULL page when
another process's page is added there, but it doesn't seem like a good
idea to map it to NULL with user read permissions.
* Only sync as much as we need to. There are only two significant places
where pmap_sync_icache is used: proc_rwmem(), and the SIGILL second-chance
for powerpc. The SIGILL second chance is likely the most common, and only
syncs 4 bytes, so avoid the other 127 loop iterations (4096 / 32 byte
cacheline) in __syncicache().
