The OpenZFS code that uses the BMI instructions is broken. Forcibly
disable them to prevent their use. When enabled, the build breaks.
This fixes the build when compiled for a core with BMI instructions.
This is the same fix committed in r364777, for the same issue.
Submitted by: Jung-uk Kim
Add support to the _STANDALONE environment enough bits of the kernel
that we can compile it. We still have a small zstd_shim.c since there
were 3 items that were a bit hard to nail down and may be cleaned up
in the future. These go hand in hand with a number of commits to
sys/sys in the past weeks, should this need be MFCd.
Discussed with: mmacy (in review and on IRC/Slack)
Reviewed by: freqlabs (on openzfs repo)
Differential Revision: https://reviews.freebsd.org/D26218
Both s_len and s_size are ssize_t, so their differece is also more
properly a ssize_t not a size_t. Also, assert that len is <= size when
we enter. This should always be the case. Ensure that we have that one
byte that we write to the end of the buffer before we do so, though
the error should already be set on the buffer if not, and the only
times we supply 'partial' buffers they should be plenty large.
Reviewed by: cem, jhb (prior version, I did cem's suggestion)
Differential Revsion: https://reviews.freebsd.org/D26752
hints work on per-channel basis as documented, rather than chip-wide. Also,
when configured via hints, return BUS_PROBE_NOWILDCARD on successful hints
match, so that the hints don't bogusly match other types of i2c chips.
There's a know issue where new group members don't get the 'set skip on'
applied until the rules are re-loaded.
Do this by setting rules that block all traffic, but skip members of the
'epair' group. If we can communicate over the epair interface we know the set
skip rule took effect, even if the rule was set before the interface was
created.
MFC after: 2 weeks
If userspace tries to set flags (e.g. 'set skip on <ifspec>') and <ifspec>
doesn't exist we should create a kif so that we apply the flags when the
<ifspec> does turn up.
Otherwise we'd end up in surprising situations where the rules say the
interface should be skipped, but it's not until the rules get re-applied.
Reviewed by: Lutz Donnerhacke <lutz_donnerhacke.de>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26742
This was causing build failures in CheriBSD where we were passing -pie
already by default.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D24787
I noticed that this part of the build was taking much longer than
expected. Turns out it's due to not running the subdirs in parallel.
Reduces `make all` inside lib/libclang_rt time from 63s to 20s with -j32.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D26623
It appears this was changed from ln to use install in rS245752. I noticed
this because my buildenv was setting INSTALL=install -U -M //METALOG
and then these links fail to be created with the following error:
install: open //METALOG: Permission denied
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D26618
We have to bootstrap arc4random.c, so guard the FenestrasX code to avoid
using it on Linux/macOS.
Reviewed By: cem
Differential Revision: https://reviews.freebsd.org/D26738
The EDD v3[1], see table 13, page 33, does define device path as double
qword, that is, 16 bytes, we have only qword.
Also remove edd_device_path_v4 and edd_params_v4 because those are not used,
and there is no size difference in v3 versus v4.
[1] http://www.t13.org/documents/UploadedDocuments/docs2004/d1572r3-EDD3.pdf
MFC after: 2 weeks
There's a number of types we forward declare for the kernel. We need
struct ucred for the ZSTD ZFS integration, so go ahead and forward
declare it here too.
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
the /boot/nextboot.conf file or its contents which is 1) not the most user-
friendly way of working with custom configurations, and 2) simply not true
for both Forth and Lua implementations: they would not delete it, but just
change the setting to "NO", that is, disable it.
While at it, add one missing serial (Oxford) comma and fix some bogus line
wraps along the way.
Approved by: bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D25971
It seems that in r354857 I got more than one thing wrong.
Convert the SYSCTL_OPAQUE to a SYSCTL_PROC to properly export the these
days allocated and not longer static per-vnet viftable array.
This fixes a problem with netstat -g which would show bogus information
for the IPv4 Virtual Interface Table.
PR: 246626
Reported by: Ozkan KIRIK (ozkan.kirik gmail.com)
MFC after: 3 days
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
There is no functional change for the existing Fortuna random(4)
implementation, which remains the default in GENERIC.
In the FenestrasX model, when the root CSPRNG is reseeded from pools due to
an (infrequent) timer, child CSPRNGs can cheaply detect this condition and
reseed. To do so, they just need to track an additional 64-bit value in the
associated state, and compare it against the root seed version (generation)
on random reads.
This revision integrates arc4random(9) into that model without substantially
changing the design or implementation of arc4random(9). The motivation is
that arc4random(9) is immediately reseeded when the backing random(4)
implementation has additional entropy. This is arguably most important
during boot, when fenestrasX is reseeding at 1, 3, 9, 27, etc., second
intervals. Today, arc4random(9) has a hardcoded 300 second reseed window.
Without this mechanism, if arc4random(9) gets weak entropy during initial
seed (and arc4random(9) is used early in boot, so this is quite possible),
it may continue to emit poorly seeded output for 5 minutes. The FenestrasX
push-reseed scheme corrects consumers, like arc4random(9), as soon as
possible.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22838
Fortuna remains the default; no functional change to GENERIC.
Big picture:
- Scalable entropy generation with per-CPU, buffered local generators.
- "Push" system for reseeding child generators when root PRNG is
reseeded. (Design can be extended to arc4random(9) and userspace
generators.)
- Similar entropy pooling system to Fortuna, but starts with a single
pool to quickly bootstrap as much entropy as possible early on.
- Reseeding from pooled entropy based on time schedule. The time
interval starts small and grows exponentially until reaching a cap.
Again, the goal is to have the RNG state depend on as much entropy as
possible quickly, but still periodically incorporate new entropy for
the same reasons as Fortuna.
Notable design choices in this implementation that differ from those
specified in the whitepaper:
- Blake2B instead of SHA-2 512 for entropy pooling
- Chacha20 instead of AES-CTR DRBG
- Initial seeding. We support more platforms and not all of them use
loader(8). So we have to grab the initial entropy sources in kernel
mode instead, as much as possible. Fortuna didn't have any mechanism
for this aside from the special case of loader-provided previous-boot
entropy, so most of these sources remain TODO after this commit.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22837
DTS must be synced with the kernel, add a freebsd,dts-version string in
the root node of each DTS that we compile so we can later in the kernel
check that it contain a correct value.
Reviewed by: imp, mmel
Differential Revision: https://reviews.freebsd.org/D26724
r366344 corrected the optimized amd64 skein assembly implementation, so
we can now enable it again.
Also add a dependency on this Makefile for the skein_block object, so
that it will be rebuit (similar to r366362).
PR: 248221
Sponsored by: The FreeBSD Foundation
r362163 upgraded mountd so that it could handle MAX_NGROUPS
groups for the anonymous user credentials (the ones provided by
-maproot and -mapall exports options).
The problem is that this resulted in every export structure growing by
about 4Kbytes, because the cr_groups field went from 16->MAX_NGROUPS.
This patch fixes this by only including a small 32 element cr_groups in the
structure and then malloc()'ng cr_groups when a larger one is needed.
The value of SMALLNGROUPS is arbitrarily set to 32, assuming most users
used by -maproot or -mapall will be in <= 32 groups.
Reviewed by: kib, freqlabs
Differential Revision: https://reviews.freebsd.org/D26521
r365732 was the first attempt to get an accurate count but it was
writing to some read-only registers to clear them and that obviously
didn't work. Instead, note the counter's value when it is supposed to
be cleared and subtract it from future readings.
dev.<port>.stats.rx_fcs_error should not be serviced from the MPS
register for T6.
The stats.* sysctls should all use T5_PORT_REG for T5 and above. This
must have been missed in the initial T5 support years ago. Fix it while
here.
MFC after: 3 days
Sponsored by: Chelsio Communications
Truncating requires an exclusive lock, but it was not taken if the
filesystem indicates support for shared writes. This only concerns
ZFS.
In particular fixes cp of files which have trailing holes.
Reported by: bdrewery
The module handler code invokes a MOD_UNLOAD event immediately if
MOD_LOAD fails. The result was that if seminit() failed, semunload()
was invoked twice. semunload() is not idempotent however and would
try to remove it's process_exit eventhandler twice resulting in a
panic.
Reviewed by: kib, markj
Obtained from: CheriBSD
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26696
Use of dead_vnodeops would result in a panic instead of returning the intended
EOPNOTSUPP error.
While here make sure to abort, not just try to return a partial result.
The former allows the regular lookup to restart from scratch, while the latter
makes it stuck with an unusable vnode.
Reported by: kevans
Single quotes interfere with the workaround put in with r335753 and
aren't necessary in this case. I believe that all the underling issues
with r335753 have been corrected, but need to do more extensive
followup before reverting it as a bad idea.
PR: 240411
MFC After: 2 days (to give it time to get into 12.2)
- When flushing extra lines after all input has been processed, make
sure that local state is reinitialized correctly.
- When -f is specified, make sure to end output with a full newline.
- Fix some style issues and update comments.
- Add some regression tests.
PR: 249308
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26536
- whitespace at end of input line
- skipping paragraph macro: Pp at the end of Sh
- new sentence, new line
- consider using OS macro: Fx
- AUTHORS section without An macro
- skipping paragraph macro: Pp before Ss
Create the RISC-V NOTES and LINT files. As of r366559, LINT configs are
no longer generated but checked in to the tree.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D26502
