Using find -s will not work with the Linux or MacOS find command. We pipe
to sort instead since the only real requirement here is that the order
stays the same. While I am touching this file I also fixed a `==` construct
which is not supported by POSIX sh but appears to work on FreeBSD.
Reviewed By: imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14246
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
In order to let truss(8) support tracing of 32-bit CloudABI
applications, we need to add a new ABI type to libsysdecode. We can
reuse the existing errno mapping table. Also link in the cloudabi32
system call table to translate system call names.
While there, remove all of the architecture ifdefs. There are not
needed, as the CloudABI data types and system call tables build fine on
any architecture. Building this unconditionally will make it easier to
do tracing for different compat modes, emulation, etc.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D13516
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12470
Previously we'd have an assertion failure in cap_rights_is_set if
sysdecode_cap_rights is called with an invalid cap_rights_t, so test for
validity first.
PR: 222258
Reviewed by: cem
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12391
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
Only filter out the PF ioctls if we're building without pf support.
Until now those were always filtered out, so truss did not show symbolic
names for pf ioctls.
Differential Revision: https://reviews.freebsd.org/D11629
This was originally added so that only one of diskmbr.h or diskpc98.h
was chosen and is no longer needed after PC98's removal. However, the
special handling was also broken as it effectively prevented the decoding
of ioctls declared in other headers such as <sys/disk.h> or
<sys/disklabel.h>.
This also avoids an error from egrep when a header is missing. This can happen
with something like WITHOUT_BLUETOOTH set when searching for
$include_dir/netgraph/bluetooth/include/ng_btsocket.h. The warning was
not an error (from set -e) due to being on the left side of a pipe. Now the
all_headers list is only filled with existing headers.
Reviewed by: ngie
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The reboot() system call accepts a mode (RB_AUTOBOOT, RB_HALT, RB_POWEROFF,
or RB_REROOT) as well as zero or more optional flags in 'howto'.
However, RB_AUTOBOOT was only displayed if 'howto' was exactly 0.
Combinations like 'RB_AUTOBOOT | RB_DUMP' were decoded as 'RB_DUMP'.
Instead, imply that RB_AUTOBOOT was specified if none of the other "mode"
flags were specified.
Add a new sysdecode_getrusage_who() which decodes the RUSAGE_* constant
passed as the first argument to getrusage(). Use this function in both
kdump and truss to decode the first argument to getrusage().
PR: 215448
Submitted by: Anton Yuzhaninov <citrin+pr@citrin.ru>
MFC after: 1 month
Decoding of the third argument depends on the first one. For doing this,
add a corresponding function to libsysdecode.
Thanks to jhb@ for suggesting this.
Fix the regex used to find vmprot table entries and add the missing include.
This fixes kdumps output of PFLT arguments which would previously look like:
5202 101546 ktrace PFLT 0x5ae000 0x2<><invalid>2
They now display correctly:
5202 101546 ktrace PFLT 0x5ac000 0x2<VM_PROT_WRITE>
MFC after: 1 week
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
As a followup to r310638, update libsysdecode (and kdump) to decode the
'mode' argument to getfsstat(). sysdecode_getfsstat_flags() has been
renamed to sysdecode_getfsstat_mode() and now treats the argument as an
enumerated value rather than a mask of flags.
This should fix the lib32 build since it was not removing the generated
ioctl.c. This file is generated by a find(1) call, so cannot use normal
dependency tracking methods.
Reported by: jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Restructure this script so that it generates a header of tables instead
of a source file. The tables are included in a flags.c source file which
provides functions to decode various system call arguments.
For functions that decode an enumeration, the function returns a pointer
to a string for known values and NULL for unknown values.
For functions that do more complex decoding (typically of a bitmask), the
function accepts a pointer to a FILE object (open_memstream() can be used
as a string builder) to which decoded values are written. If the
function operates on a bitmask, the function returns true if any bits
were decoded or false if the entire value was valid. Additionally, the
third argument accepts a pointer to a value to which any undecoded bits
are stored. This pointer can be NULL if the caller doesn't care about
remaining bits.
Convert kdump over to using decoder functions from libsysdecode instead of
mksubr. truss also uses decoders from libsysdecode instead of private
lookup tables, though lookup tables for objects not decoded by kdump remain
in truss for now. Eventually most of these tables should move into
libsysdecode as the automated table generation approach from mksubr is
less stale than the static tables in truss.
Some changes have been made to truss and kdump output:
- The flags passed to open() are now properly decoded in that one of
O_RDONLY, O_RDWR, O_WRONLY, or O_EXEC is always included in a decoded
mask.
- Optional arguments to open(), openat(), and fcntl() are only printed
in kdump if they exist (e.g. the mode is only printed for open() if
O_CREAT is set in the flags).
- Print argument to F_GETLK/SETLK/SETLKW in kdump as a pointer, not int.
- Include all procctl() commands.
- Correctly decode pipe2() flags in truss by not assuming full
open()-like flags with O_RDONLY, etc.
- Decode file flags passed to *chflags() as file flags (UF_* and SF_*)
rather than as a file mode.
- Fix decoding of quotactl() commands by splitting out the two command
components instead of assuming the raw command value matches the
primary command component.
In addition, truss and kdump now build without triggering any warnings.
All of the sysdecode manpages now include the required headers in the
synopsis.
Reviewed by: kib (several older versions), wblock (manpages)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D7847
