and MK_LLDB=no, so set those explicitly (now that we can do
that). Simplify tests for these variables as well, since we know they
will always be defined regardless of the phase of the build.
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
This is in the process of being submitted to the upstream LLDB
repository. The thread list functionality is modelled in part on
GDBRemoteCommunicationClient.
LLDB bug pr16696 and code review D2267
Sponsored by: DARPA, AFRL
ludes minor changes relative to upstream, for compatibility with
FreeBSD's in-tree LLVM 3.3:
- Reverted LLDB r191806, restoring use of previous API.
- Reverted part of LLDB r189317, restoring previous enum names.
- Work around missing LLVM r192504, using previous registerEHFrames API
(limited functionality).
- Removed PlatformWindows header include and init/terminate calls.
Sponsored by: DARPA, AFRL
This connects LLDB to the build, but it is disabled by default. Add
WITH_LLDB= to src.conf to build it.
Note that LLDB requires a C++11 compiler so is disabled on platforms
using GCC.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
clang on head between r239347 and r245428.
The former revision introduced CLOCK_PROCESS_CPUTIME_ID as a clock id
for the clock_gettime() function and friends, but it was only added in
<sys/time.h>, not in <time.h>. Any program including <time.h> would
therefore not be able to use CLOCK_PROCESS_CPUTIME_ID, even though the
value of _POSIX_CPUTIME indicates its existence. The latter revision
synchronized the defines again.
Work around this problem by defining the id on the command line for the
particular .cpp file that needs it. If the id ever changes value, this
hack will need to be updated.
upcoming 3.3 release (branching and freezing expected in a few weeks).
Preliminary release notes can be found at the usual location:
<http://llvm.org/docs/ReleaseNotes.html>
An MFC is planned once the actual 3.3 release is finished.
Dont use/link ARCMT, StaticAnalyzer and Rewriter to clang when the user
specifies not to. Dont build ASTMatchers with Rewriter disabled and
StaticAnalyzer when it's disabled.
Without all those three, the clang binary shrinks (x86_64) from ~36MB
to ~32MB (unstripped).
To disable these clang components, and get a smaller clang binary built
and installed, set WITHOUT_CLANG_FULL in src.conf(5). During the
initial stages of buildworld, those extra components are already
disabled automatically, to save some build time.
MFC after: 1 week
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
to be a wrapper for the canonical system header file. Unfortunately, we do
not have one (yet) and some times it is causing weird failures when clang
is used for building ports. More complete and correct file will come from
libcxxrt in the future.
Discussed with: dim, kib, theraven
MFC after: 1 week
in the last import. They are sometimes needed when you want to use
advanced instructions.
Also, add clang's internal stdalign.h header to ObsoleteFiles.inc, since
it is redundant: we already have a stdalign.h header in /usr/include.
Pointy hat to: dim
PR: kern/167574
Submitted by: jkim
Reported by: Oliver Hartmann <ohartman@zedat.fu-berlin.de>
MFC after: 2 weeks
problem by adding -fno-strict-aliasing to CFLAGS. Since this is a global
issue that just happened to manifest on PowerPC, add this to CFLAGS
unconditionally.
MFC after: 1 week
allow the built-in operations to be redefined, at least not without
excessive force).
Instead, just disable LLVM's support for atomic operations for now.
Nothing in either clang or the tablegen tools currently depends on it.
This still allows users of head built before r198344 to upgrade to
top-of-head seamlessly.
to be gcc's default before r198344, calls to atomic builtins will not be
expanded inline. Instead, they will be generated as calls to external
functions (e.g. __sync_fetch_and_add_N), leading to linking errors later
on.
Put in a seatbelt that disables use of atomic builtins in libstdc++ and
llvm, when tuning specifically for the real i386 CPU. This does not
protect against all possible issues, but it is better than nothing.
similar to what we do for binutils. When clang's default triple starts
with 'amd64-', it does not pass a proper -target-cpu option to its
first stage.
This can lead to problems, for example when structs are memcpy'd, and
clang erroneously assumes they are 16-byte aligned. It will then use
the 'movaps' SSE instruction to implement the copy, which results in a
bus error if the struct is really 8-byte aligned.
I encountered this issue when gcc's /usr/libexec/cc1 started crashing
with SIGBUS, after rebuilding world with clang ToT, but it also affects
the version of clang that we have in the tree. We were just lucky until
now, apparently. :)
There are several bugfixes in this update, but the most important one is
to ensure __start_ and __stop_ symbols for linker sets and kernel module
metadata are always emitted in object files:
http://llvm.org/bugs/show_bug.cgi?id=9292
Before this fix, if you compiled kernel modules with clang, they would
not be properly processed by kldxref, and if they had any dependencies,
the kernel would fail to load those. Another problem occurred when
attempting to mount a tmpfs filesystem, which would result in 'operation
not supported by device'.
