- Add macros to handle the differences in accessing these registers on arm
and arm64.
- Use the fdt data to detect if we are on an ARMv7 or ARMv8.
- Use the virtual timer by default on arm64, we may not have access to
the physical timer.
Differential Revision: https://reviews.freebsd.org/D2208
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Previously, the driver was trying to blink the LED in the newstate
function, but that only gets called once (unlike OpenBSD's net80211
stack). Move the LED blinking to set_channel().
While there, don't try to set the channel when we switch to the SCAN
state. This is already accomplished by the set_channel() function.
MFC after: 1 week
It's necessary to reset the screen to make sure any vendor pixels are
gone when we start boot1. In the Lenovo X1 (3rd gen), this is the
only way to clear the screen. Previously, the Lenovo logo would only
disappear after the kernel started scrolling the display.
After resetting the screen, EFI could put us in the worst LCD mode
(oversized characters), so we now find the largest mode we can use and
hope it's the most appropriate one (it's not trivial to tell what's
the correct LCD resolution at this point). It's worth noting that the
final stage loader has a 'mode' command that can be used to switch
text modes.
While there, enable the software cursor, just like in the legacy boot
mode.
MFC after: 1 week
Even on Illumos, with its much larger KVA, ZFS ARC steps back if KVA usage
reaches certain threshold (3/4 on i386 or 16/17 otherwise). FreeBSD has
even less KVA, but had no such limit on archs with direct map as amd64.
As result, on machines with a lot of RAM, during load with very small user-
space memory pressure, such as `zfs send`, it was possible to reach state,
when there is enough both physical RAM and KVA (I've seen up to 25-30%),
but no continuous KVA range to allocate even single 128KB I/O request.
Address this situation from two sides:
- restore KVA usage limitations in a way the most close to Illumos;
- introduce new requirement for KVA fragmentation, specifying that we
should have at least one sequential KVA range of zfs_max_recordsize bytes.
Experiments show that first limitation done alone is not sufficient. On
machine with 64GB of RAM it is sometimes needed to drop up to half of ARC
size to get at leats one 1MB KVA chunk. Statically limiting ARC to half
of KVA/RAM is too strict, so second limitation makes it to work in cycles:
accumulate trash up to certain critical mass, do massive spring-cleaning,
and then start littering again. :)
MFC after: 1 month
work stack and is reused again on the receive ring. Remaining received packets in the ring are not processed in that
invocation of bxe_rxeof() and defered to the task thread.
MFC after: 5 days
Amd64 uses relocatable object files as the modules format. It is good
WRT not having unneeded overhead for PIC code, in particular, due to
absence of useless GOT and PLT. But the cost is that the module
linking process cannot use hash to speed up the symbol lookup, and
that each reference to the symbol requiring a relocation, instead of
single-place relocation in GOT.
Cache the successfull symbol lookup results in the module symbol
table, using the newly allocated SHN_FBSD_CACHED value from
SHN_LOOS-HIOS range as an indicator. The SHN_FBSD_CACHED together
with the non-existent definition of the found symbol are reverted
after successfull relocations, which is done under kld_sx lock, so it
should not be visible to other consumers of the symbol table.
Submitted by: Conrad Meyer
Differential Revision: https://reviews.freebsd.org/D1718
MFC after: 3 weeks
This was not (and still is not) connected to the build, but the EFI
loader is in the process of being built for other than amd64 so these
files ought to live in their eventual MD location.
header and not only partial flags and fields. Firewalls can attach
classification tags to the outgoing mbufs which should be copied to
all the new fragments. Else only the first fragment will be let
through by the firewall. This can easily be tested by sending a large
ping packet through a firewall. It was also discovered that VLAN
related flags and fields should be copied for packets traversing
through VLANs. This is all handled by "m_dup_pkthdr()".
Regarding the MAC policy check in ip_fragment(), the tag provided by
the originating mbuf is copied instead of using the default one
provided by m_gethdr().
Tested by: Karim Fodil-Lemelin <fodillemlinkarim at gmail.com>
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
PR: 7802
stage, just like for the regular world stage.
Reviewed by: rodrigc, imp, bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D2187
not have interupt property in pl310 node. Interrupt is used only to
detect cache activity when L2 cache is disabled, it's not vital for
normal operations.
- Fix intrhook allocation/initialization
There are cases when gpioled nodes in DTS come from different sources
(e.g. standard Beaglebone Black LEDs in main DTS + shield LEDs in
overlay DTS) so instead of handling only first compatible node go
through all child nodes
where we want to create a new IP datagram.
o Add support for RFC6864, which allows to set IP ID for atomic IP
datagrams to any value, to improve performance. The behaviour is
controlled by net.inet.ip.rfc6864 sysctl knob, which is enabled by
default.
o In case if we generate IP ID, use counter(9) to improve performance.
o Gather all code related to IP ID into ip_id.c.
Differential Revision: https://reviews.freebsd.org/D2177
Reviewed by: adrian, cy, rpaulo
Tested by: Emeric POUPON <emeric.poupon stormshield.eu>
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Relnotes: yes
- bus_dmamap_create() does not take the BUS_DMA_NOWAIT flag
- properly unload maps
- do not assign NULL to dma map pointers
Submitted by: Konstantin Belousov <kostikbel@gmail.com>
Approved by: jfv (mentor)
MFC after: 1 week
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
On Ethernet packets have a minimal length, so very short packets get padding
appended to them. This padding is not stripped off in ip6_input() (due to
support for IPv6 Jumbograms, RFC2675).
That means PF needs to be careful when reassembling fragmented packets to not
include the padding in the reassembled packet.
While here also remove the 'Magic from ip_input.' bits. Splitting up and
re-joining an mbuf chain here doesn't make any sense.
Differential Revision: https://reviews.freebsd.org/D2189
Approved by: gnn (mentor)
When forwarding fragmented IPv6 packets and filtering with PF we
reassemble and refragment. That means we generate new fragment headers
and a new fragment ID.
We already save the fragment IDs so we can do the reassembly so it's
straightforward to apply the incoming fragment ID on the refragmented
packets.
Differential Revision: https://reviews.freebsd.org/D2188
Approved by: gnn (mentor)
