The condition used matches the condition in sys.mk for setting _+_ to blank
or +.
With this -n will continue to not descend into Makefile.inc1, while -n -n will
and cause Makefile.inc1's target to run with -n.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
the module is built-in to the kernel then the kldunload will fail. Rather
than do this just check if there are rules and then remove them all.
Add requirement on FILESYSTEMS to ensure /usr is present for /usr/sbin/ugidfw
and /usr/bin/xargs. This was already effectively the ordering from rcorder(8).
MFC after: 2 weeks
Relnotes: yes
transport specific form of a universal transport address. The
structure is expected to be opaque to consumers. In the current
implementation, the structure contains a pointer to a buffer
that holds the actual address.
In rpcbind(8), netbuf structures are copied directly, which would
result in two netbuf structures that reference to one shared
address buffer. When one of the two netbuf structures is freed,
access to the other netbuf structure would result in an undefined
result that may crash the rpcbind(8) daemon.
Fix this by making a copy of the buffer that is going to be freed
instead of doing a shallow copy.
Security: FreeBSD-SA-15:24.rpcbind
Security: CVE-2015-7236
MS-DOS partition. This will help with transitioning to
a single arm/armv6 userland build which could be used for
all FreeBSD/armv6 images without UBLDR_LOADADDR being set
for each board (ultimately requiring a separate buildworld
for each currently).
Requested by: ian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
out of 'struct pcb' and into a variable-sized region after the
structure. The kgdb code currently only reads the pcb. It does not
read in the FPU save area but instead passes stack garbage as the
FPU's saved context. Fixing this would mean determining the proper
size of the area and fetching it. However, this state is not saved
for running CPUs in stoppcbs[], so the callback would also have to
know to ignore those pcbs. Instead, just remove the call since it is
of limited usefulness. It results in kgdb reporting the state of the
FPU/SIMD registers in userland, not their current values in the kernel.
In particular, it does not report the correct state for any code in
the kernel which does use the FPU and would report incorrect values
in that case.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3743
otherwise DTRACE_ANCHORED() returns false and that makes stack()
insert a bogus frame at the top.
For example:
dtrace -n 'test:dtrace_test::sdttest { stack(); }
This change is not really a solution, but just a work-around.
The real solution is to record the probe's call site and to use
that for resolving a function name.
PR: 195222
MFC after: 22 days
This logic is mostly crimed from the reference driver and the linux
r92su driver.
I verified that it (a) worked on the rsu hardware I have, and (b)
did traffic testing whilst watching what ath(4) sent as a hostap.
It successfully sent MCS8..15 rates (which requires 2-stream reception)
as well as MCS0..7 (which is 1-stream.)
Tested:
* RTL8712, 1T1R NIC, MCS rates 0..7.
* RTL8712, 1T2R NIC, MCS rates 0..15
TODO:
* Find a 2T2R NIC!
* include opt_wlan.h like a good little wlan driver;
* add a function to free the mbufq /and/ the node references on it, or we will leak
said node references;
* free the mbufq upon NIC shutdown otherwise we may end up with a full list that
we never begin transmit work on, and thus never drain it;
* .. which frees it upon NIC detach too;
* ensure urtwn_start() gets called after the completion of frame TX even if the
pending queue is empty, otherwise transmit will stall. It's highly unlikely that
the usb tx queue would be empty whilst the incoming send queue is full, but hey,
who knows.
This passes some iperf testing with and without the NIC being actively removed during
said active iperf test.
Tested:
* urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R ; STA mode
set to empty values, which would result in nonintuitive build
errors.
MFC after: 3 days
X-MFC-With: r288341
PR: 203420 (related to)
Sponsored by: The FreeBSD Foundation
SDT_PROBE requires 5 parameters whereas SDT_PROBE<n> requires n parameters
where n is typically smaller than 5.
Perhaps SDT_PROBE should be made a private implementation detail.
MFC after: 20 days
Fast-frames:
* include opt_wlan.h ; tsk to not doing it earlier;
* add a tx pending tracking counter for seeing how deep
the hardware TX queue is;
* add the frame aging code from if_ath;
* add fast-frames capability to the driver setup.
Bugs:
* free the buffers (and node references) before
detaching net80211 state. This prevents a use-after-free in
the node free path where we've destroyed net80211 underneath it.
field and into a separate fast-frames staging pointer in ieee80211_node.
The A-MPDU TX path allows txa_private to be used by drivers. So it will
clash with any attempt to use fast-frames. Now, fast-frames is not really
anything special - it's just a custom ethernet frame type that contains
two MSDUs into one MPDU. So all the NIC has to support doing is transmitting
up to a 4KiB frame with an arbitrary ethertype and bam! Fast-frames.
However, using txa_private means we can /either/ do fast-frames or A-MPDU TX,
so fast frames has been turned off in the Atheros HAL for 11n chipsets.
This is a bit silly - it actually means that 802.11 performance to/from
11abg Atheros chips is actually better than between an 11abg atheros device
and an 11n Atheros device.
So:
* create a new mbuf staging queue for fast frames. It only queues a single
frame in the staging queue (and there's a top-level ic staging queue
used for expiry/tracking) so it's just an mbuf pointer per TID.
* Still use the ampdu TX packet counter to determine whether to do
aggregation or not. It'll double count if we start doing both A-MPDU TX
and fast frames, but that's not all that important right now.
* Initialise the pps tracker so ticks isn't zero. This ensures that
fast-frames actually gets used - without it, the ticks math overflows
and the pps math always sets txa_pps=0. This is the same bug that
plagued A-MPDU TX starting logic.
This actually allows fast-frames transmit to occur between the AR9331
(in 11n HT/20 mode) and AR9170 (if_otus) in 11bg mode.
Now, this is a great big no-op on atheros 11n hardware, so don't worry.
It may mean you start seeing more reliable fast-frames transmission on
11abg hardware which may expose some more amusing bugs.
TODO:
* further testing and debugging of all of this before flipping on
fast-frames in if_ath (for 11n) and if_otus.
