them out of the #if _BSD_VISIBLE block. Other headers may depend on
__bitcount(). The dependencies can be a header not specified by
POSIX, and then namespace restrictions by _XOPEN_SOURCE are not
applicable, as it was reported. Or, we might grow an implementation
of some POSIX facility using __bitcount(), which also should work.
Reported by: Jason Schulz <schulz.j@gmail.com>
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
in the join message so the firmware would pick it up.
* Strip out the direct hardware fiddling for 40MHz mode - the firmware
we're using doesn't require it (the rtl8712su firmware does; it
is less 'fullmac' than what we're using.)
* Fix the mbuf handling during errors - rsu_tx shouldn't free mbufs;
it's up to the caller to do so. This brings it in line with
what other drivers do or should be doing.
Tested:
* RTL8712, HT40 channel, STA mode (during this commit)
belong to a vm object, they can't be paged out. Since they can't be paged
out, they are never enqueued in a paging queue. Nonetheless, passing
PQ_INACTIVE to vm_page_unwire() creates the appearance that these pages
are being enqueued in the inactive queue. As of r288122, we can avoid
this false impression by passing PQ_NONE.
Submitted by: kmacy (an earlier version)
Differential Revision: https://reviews.freebsd.org/D1674
Atheros.
Thanks to OpenBSD for providing a driver based on the original
Atheros open source driver circa 2008. This uses the early, pre-carl9170
atheros provided firmware.
It only supports 11bg at the moment. I've not tested it with 11a
(and so the TX rate control logic may be slightly wrong!) so if
you do have the dual-band version of this hardware please do let me know.
Tested:
* AR9170, TP-Link WN821N 2GHz.
TODO:
* Hook this up to a non-module build.
net80211 receive path. This allows drivers (notably USB right now, but
anything/everything!) to optionally defer bulk RX of 802.11 frames until
/outside/ of the driver lock(s), rather than doing:
UNLOCK(sc);
ieee80211_input*()
LOCK(sc);
.. which is really stupid.
The existing API is maintaned - if ieee80211_input() / ieee80211_input_all()
is called then the RSSI/NF values are used. If the MIMO versions are called
with a given rx status pointer then it's used. Else, it'll use whatever
is in the RX mbuf tag.
Revamp sbuf_put_byte() to sbuf_put_bytes() in the obvious fashion and
fixup callers.
Add a thin shim around sbuf_put_bytes() with the old ABI to avoid ugly
changes to some callers.
Reviewed by: jhb, markj
Obtained from: Dan Sledz
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3717
are updated lockess, different CPUs write its own view of timecounter
state. The critical section is done for safety, callers of
tc_cpu_ticks() are supposed to already enter critical section, or to
own a spinlock.
The change fixes sporadical reports of too high values reported for
the (W)CPU on platforms that do not provide cpu ticker and use
tc_cpu_ticks(), in particular, arm*.
Diagnosed and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
A change to a property on a dataset must be propagated to its descendants
in case that property is inherited. For datasets whose information is
not currently loaded into memory (e.g. a snapshot that isn't currently
mounted), there is nothing to do; the property change will take effect
the next time that dataset is loaded. To handle updates to datasets that
are in-core, ZFS registers a callback entry for each property of each
loaded dataset with the dsl directory that holds that dataset. There
is a dsl directory associated with each live dataset that references
both the live dataset and any snapshots of the live dataset. A property
change is effected by doing a traversal of the tree of dsl directories
for a pool, starting at the directory sourcing the change, and invoking
these callbacks.
The current implementation both registers and de-registers properties
individually for each loaded dataset. While registration for a property is
O(1) (insert into a list), de-registration is O(n) (search list and then
remove). The 'n' for de-registration, however, is not limited to the size
(number of snapshots + 1) of the dsl directory. The eviction portion
of the life cycle for the in core state of datasets is asynchronous,
which allows multiple copies of the dataset information to be in-core
at once. Only one of these copies is active at any time with the rest
going through tear down processing, but all copies contribute to the
cost of performing a dsl_prop_unregister().
One way to create multiple, in-flight copies of dataset information
is by performing "zfs list" operations from multiple threads
concurrently. In-core dataset information is loaded on demand and then
evicted when reference counts drops to zero. For datasets that are not
mounted, there is no persistent reference count to keep them resident.
So, a list operation will load them, compute the information required to
do the list operation, and then evict them. When performing this operation
from multiple threads it is possible that some of the in-core dataset
information will be reused, but also possible to lose the race and load
the dataset again, even while the same information is being torn down.
Compounding the performance issue further is a change made for illumos
issue 5056 which made dataset eviction single threaded. In environments
using automation to manage ZFS datasets, it is now possible to create
enough of a backlog of dataset evictions to consume excessive amounts
of kernel memory and to bog down the system.
The fix employed here is to make property de-registration O(1). With this
change in place, it is hoped that a single thread is more than sufficient
to handle eviction processing. If it isn't, the problem can be solved
by increasing the number of threads devoted to the eviction taskq.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dataset.c
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_dir.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dsl_prop.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dataset.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_dir.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_prop.h:
Associate dsl property callback records with both the
dsl directory and the dsl dataset that is registering the
callback. Both connections are protected by the dsl directory's
"dd_lock".
When linking callbacks into a dsl directory, group them by
the property type. This helps reduce the space penalty for the
double association (the property name pointer is stored once
per dsl_dir instead of in each record) and reduces the number of
strcmp() calls required to do callback processing when updating
a single property. Property types are stored in a linked list
since currently ZFS registers a maximum of 10 property types
for each dataset.
Note that the property buckets/records associated with a dsl
directory are created on demand, but only freed when the dsl
directory is freed. Given the static nature of property types
and their small number, there is no benefit to freeing the few
bytes of memory used to represent the property record earlier.
When a property record becomes empty, the dsl directory is either
going to become unreferenced a little later in this thread of
execution, or there is a high chance that another dataset is
going to be loaded that would recreate the bucket anyway.
Replace dsl_prop_unregister() with dsl_prop_unregister_all().
All callers of dsl_prop_unregister() are trying to remove
all property registrations for a given dsl dataset anyway. By
changing the API, we can avoid doing any lookups of callbacks
by property type and just traverse the list of all callbacks
for the dataset and free each one.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu_objset.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:
Replace use of dsl_prop_unregister() with the new
dsl_prop_unregister_all() API.
illumos/illumos-gate@03bad06fbb
Author: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Illumos issue:
6171 dsl_prop_unregister() slows down dataset eviction
https://www.illumos.org/issues/6171
MFC after: 2 weeks
Refer to the usb_quirk(4) manual page for more details on how to use
this new feature.
Submitted by: Maxime Soule <btik-fbsd@scoubidou.com>
PR: 203249
MFC after: 2 weeks
* Don't free the mbuf in the tx path - it uses the transmit path now,
so the caller frees the mbuf.
* Don't decrement the node ref upon error - that's up to the caller to
do as well.
Tested:
* Intel 5300 3x3 wifi, station mode
Noticed by: <s3erios@gmail.com>
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
Skip a /dev/ prefix, if one is present, when checking for matching
device names for dump.
Suggested by: avg
Reviewed by: markj
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3725
We allow to modify only few fields in mode pages now, but still it is
not good if they unexpectedly change during failover. Also this fixes
reporting of "Mode parameters changed" UAs on secondary node.
HA protocol requires strict version, parameters and configuration match.
Differences there may cause full set of problems up to kernel panic.
To avoid that, validate peer parameters on connect, and abort connection
immediately if some mismatch detected.
- Eliminate bogus page replacement that is inconsistently applied in the
invalidation loop in brelse. This has been a no-op in modern times as
biodone() is responsible for cleaning up after bogus pages. This
would've spammed the console with printfs at a minimum.
- Allow the compiler and human readers alike to reason about allocbuf()
by splitting it into constituent parts.
- Separate the VM manipulating and buf manipulating code in brelse() and
bufdone() so that the intentions are clear. This makes it evident that
there are several duplicated buf pages loops that will be consolidated
at a later time.
Reviewed by: kib
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
reschedule. Right now arm_cpu_intr() does critical_exit() as the last
action, so the impact is not serious.
Remove duplicated interrupt disable in restore_registers macro, when
returning to usermode. The do_ast macro disabled interrupts for us.
Reviewed by: andrew
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3714
queue and (2) returns a Boolean indicating whether the page's wire count
transitioned to zero.
Exploit this change in vfs_vmio_release() to avoid pointlessly enqueueing
a page that is about to be freed.
(An earlier version of this change was developed by attilio@ and kmacy@.
Any errors in this version are my own.)
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
