read or write of all registered realtime clocks. In the read case, the
values read are simply discarded. For writes, there's no alternative but
to actually write the current system time to the device.
makes them consistent with the way other page-table pages are allocated.
It also provides the rest of the VM system a good clue that these pages
are used.
Reviewed by: alc, kib, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14269
These are the .lua files from from Pedro Souza's 2014 Summer of Code
project. Rui Paulo, Pedro Arthur and Wojciech A. Koszek also
contributed.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Improve the SoC lua menu code to bring it in line with forth
menu functionality
Submitted by: Zakary Nafziger
Sponsored by: FreeBSD Foundation
Use loader.setenv and loader.unsetenv instead of loader.perform
Convert from include("/boot/foo.lua") to foo = require("foo");
to bring in line with latest lua module conventions.
Enforce a uniform style for the new .lua files:
o hard tab indenation for 8 spaces
o don't have if foo then bar; else bas; end on one line
MFC After: 1 month
Relnotes: yes
Differential Review: https://reviews.freebsd.org/D14295
liblua glues the lua run time into the boot loader. It implements all
the runtime routines that lua expects. In addition, it has a few
standard 'C' headers that nueter various aspects of the LUA build that
are too specific to lua to be in libsa. Many refinements from the
original code to improve implementation and the number of included lua
libraries. Use int64_t for lua_Number. Have "/boot/lua" be the default
module path. Numerous cleanups from the original GSoC project,
including hacking libsa to allow lua to be built with only one change
outside luaconf.h.
Add the final bit of lua glue to bring in liblua and plug into the
multiple interpreter framework, previously committed.
Add LOADER_LUA option, currently off by default.
Presently, this is an experimental option. One must opt-in to using
this by defining WITH_LOADER_LUA and WITHOUT_FORTH. It's been
lightly tested, so keep a backup copy of your old loader handy.
The menu code, coming in the next commit, hasn't been exhaustively
tested. A LUA boot loader is 60k larger than a FORTH one, which is
80k larger than a no-interpreter one. Subtle changes in size
may tip things past some subtle limit (the binary is ~430k now
when built with LUA). A future version may offer coexistance.
Bump FreeBSD version to 1200058 to mark the milestone.
Pedro Souza's 2014 Summer of Code project. Rui Paulo, Pedro Arthur,
Zakary Nafziger and Wojciech A. Koszek also contributed. Warner Losh
reworked it extensively into its current form.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Relnotes: Yes
MFC After: 1 month
Differential Review: https://reviews.freebsd.org/D14295
We don't support older compilers. Most of the code in these files is
for pre-3.0 gcc, which is at least 15 years obsolete. Move to using
phk's sys/_stdargs.h for all these platforms.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14323
Turn devmatch on by default. However, use 'start' instead of
'onestart' in the devmatch.conf file so the setting of
'devmatch_enable' is honored. Give an example of what to put in
devd.conf if you want to disable just the run-time part of devmatch.
Relnotes: yes
The usage is simpler, documented, and more common.
Reviewed by: cem
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14227
Line up the macro definitions and names here like the machine/stdarg.h
files that this replaced. This is easier to read and also makes it
easier to match up with other includes. Also two space indent va_end
to match the rest of the surrounding if block.
because the whole idea of this utility is rather broken.)
This originally come from NetBSD, and was later reworked a bit.
Reviewed by: des@ (earlier version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4981
Using args[2]->tcps_state as-documented results in error:
operator -> cannot be applied to pointer to type "void"
This error is accurate as the synopsis for tcp:::state-change is:
tcp:::state-change(void *, csinfo_t *, void *, tcpsinfo_t *, void *,
tcplsinfo_t *);
args[2] refers to the third argument which is always NULL (as-
documented). The to-state for the TCP connection state transition is
actually in the fourth argument, args[3]->tcps_state.
Summary:
r329077 caused gcc to emit uninitialized use warnings. Attempting to
fix those warnings yielded the following warnings:
usr.bin/tftp/main.c: In function 'main':
usr.bin/tftp/main.c:181: warning: variable 'el' might be clobbered by
'longjmp' or 'vfork'
usr.bin/tftp/main.c:182: warning: variable 'hist' might be clobbered by
'longjmp' or 'vfork'
This is a known bug in gcc, found at
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=24239
Work around that by simply marking hist and el as static.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D14302
Fix several cases when long buffer is copied to shorter one
using snprintf that results in contents truncation and
clobbering unsaved errno value and creation of misleading logs.
PR: 218517
Approved by: avg (mentor)
MFC after: 1 month
later by TCP-MD5 code.
This fixes the problem with broken TCP-MD5 over IPv4 when NIC has
disabled TCP checksum offloading.
PR: 223835
MFC after: 1 week
the module interface.
This is the more common approach and the syscall_helper interface is
easier to understand.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14251
This is a first part of the change. It makes the drivers to calculate
the required number of chain frames to satisfy worst case scenarios, but
it does not change existing overly strict limits on them. The next step
will be to rewrite the allocator to not require megabytes of physically
contiguous address space, that may be problematic if done after boot,
after doing which the limits can be removed. Until that this code can
just correct user set limits, if they are set too high.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14261
Introduce WITH_/WITHOUT_LLVM_COV to match GCC's WITH_/WITHOUT_GCOV.
It is intended to provide a superset of the interface and functionality
of gcov.
It is enabled by default when building Clang, similarly to gcov and GCC.
This change moves one file in libllvm to be compiled unconditionally.
Previously it was included only when WITH_CLANG_EXTRAS was set, but the
complexity of a new special case for (CLANG_EXTRAS | LLVM_COV) is not
worth avoiding a tiny increase in build time.
Reviewed by: dim, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D142645
to see how much space it on them.
Adjust MOUNT_CHAR_DEVS to allow the free space of already mounted
devices to be displayed and report an appropriate error if the
device isn't mounted.
Reviewed by: cem
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8801
r328113 and affecting SMP systems.
The way the time is set on PowerMacs is racy and relies on all the
CPUs in the system setting a register simultaneously in a rendezvous. A
few-cycle delay can result in out-of-sync times, which can break the
scheduler and result in calls like mtx_sleep() and pause() never timing out
if the thread is migrated while sleeping. r328113 added a call to a no-op
function between the beginning of the rendezvous and setting the time that
was only called on APs and added enough cycles to cause a problematic offset.
For some reason, the fan-management code was the first place this appeared.
Clue from: andreast
Reported by: many
to make the order of operations clearer to avoid the race condition
that was fixed in r328914. In particular, this commit corrects a
similar race that existed in the soft updates callback.
Doing some sleuthing through the SVN repository, it appears that
bufdone_finish() was added to support XFS:
------------------------------------------------------------------------
r153192 | rodrigc | 2005-12-06 19:39:08 -0800 (Tue, 06 Dec 2005) | 13 lines
Changes imported from XFS for FreeBSD project:
- add fields to struct buf (needed by XFS)
- 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3
- b_pin_count, count of pinned buffer
- add new B_MANAGED flag
- add breada() function to initiate asynchronous I/O on read-ahead blocks.
- add bufdone_finish(), bpin(), bunpin_wait() functions
Patches provided by: kan
Reviewed by: phk
Silence on: arch@
------------------------------------------------------------------------
It does not appear to ever have been used for anything else. XFS was
disconnected in r241607:
------------------------------------------------------------------------
r241607 | attilio | 2012-10-16 03:04:00 -0700 (Tue, 16 Oct 2012) | 5 lines
Disconnect non-MPSAFE XFS from the build in preparation for dropping
GIANT from VFS.
This is not targeted for MFC.
------------------------------------------------------------------------
and removed entirely in r247631:
------------------------------------------------------------------------
r247631 | attilio | 2013-03-02 07:33:54 -0800 (Sat, 02 Mar 2013) | 5 lines
Garbage collect XFS bits which are now already completely disconnected
from the tree since few months.
This is not targeted for MFC.
------------------------------------------------------------------------
Since XFS support is gone, there is no reason to retain biodone_finish().
Suggested by: Warner Losh (imp)
Discussed with: cem, kib
Tested by: Peter Holm (pho)
This bug was first reported 14 years ago. The problem was understood 8.5
years ago. A patch that is functionally identical to this one was proposed
almost 8 years ago and languished in the PR system / Bugzilla.
PR: 63197
Submitted by: lxv AT omut.org, fernando.apesteguia AT gmail.com
Reported by: freebsd AT nbritton.org
