than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.
Submitted by: Mike Karels
Differential Revision: https://reviews.freebsd.org/D6262
Factor out nd6 and in6_attach initialization to their own files.
Also move destruction into those files though still called from
the central initialization.
Sponsored by: CK Software GmbH
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D5033
This allows some simplification of its callers. No functional change
intended.
Tested by: Larry Rosenman (as part of a larger change)
MFC after: 1 month
This addresses a number of race conditions that can cause crashes as a
result of unsynchronized access to the list.
PR: 206904
Tested by: Larry Rosenman <ler@lerctr.org>,
Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D5315
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
When using lagg failover mode neither Gratuitous ARP (IPv4) or Unsolicited
Neighbour Advertisements (IPv6) are sent to notify other nodes that the
address may have moved.
This results is slow failover, dropped packets and network outages for the
lagg interface when the primary link goes down.
We now use the new if_link_state_change_cond with the force param set to
allow lagg to force through link state changes and hence fire a
ifnet_link_event which are now monitored by rip and nd6.
Upon receiving these events each protocol trigger the relevant
notifications:
* inet4 => Gratuitous ARP
* inet6 => Unsolicited Neighbour Announce
This also fixes the carp IPv6 NA's that stopped working after r251584 which
added the ipv6_route__llma route.
The new behavour can be controlled using the sysctls:
* net.link.ether.inet.arp_on_link
* net.inet6.icmp6.nd6_on_link
Also removed unused param from lagg_port_state and added descriptions for the
sysctls while here.
PR: 156226
MFC after: 1 month
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4111
Initially function was introduced in r53541 (KAME initial commit) to
"provide hints from upper layer protocols that indicate a connection
is making "forward progress"" (quote from RFC 2461 7.3.1 Reachability
Confirmation).
However, it was converted to do nothing (e.g. just return) in r122922
(tcp_hostcache implementation) back in 2003. Some defines were moved
to tcp_var.h in r169541. Then, it was broken (for non-corner cases)
by r186119 (L2<>L3 split) in 2008 (NULL ifp in nd6_lookup). So,
right now this code is broken and has no "real" base users.
Differential Revision: https://reviews.freebsd.org/D3699
function. The change is mostly mechanical with the following exception:
Last piece of nd6_resolve_slow() was refactored: ND6_LLINFO_PERMANENT
condition was removed as always-true, explicit ND6_LLINFO_NOSTATE ->
ND6_LLINFO_INCOMPLETE state transition was removed as duplicate.
Reviewed by: ae
Sponsored by: Yandex LLC
Problem description:
How do we currently perform layer 2 resolution and header imposition:
For IPv4 we have the following chain:
ip_output() -> (ether|atm|whatever)_output() -> arpresolve()
Lookup is done in proper place (link-layer output routine) and it is possible
to provide cached lle data.
For IPv6 situation is more complex:
ip6_output() -> nd6_output() -> nd6_output_ifp() -> (whatever)_output() ->
nd6_storelladdr()
We have ip6_ouput() which calls nd6_output() instead of link output routine.
nd6_output() does the following:
* checks if lle exists, creates it if needed (similar to arpresolve())
* performes lle state transitions (similar to arpresolve())
* calls nd6_output_ifp() which pushes packets to link output routine along
with running SeND/MAC hooks regardless of lle state
(e.g. works as run-hooks placeholder).
After that, iface output routine like ether_output() calls nd6_storelladdr()
which performs lle lookup once again.
As a result, we perform lookup twice for each outgoing packet for most types
of interfaces. We also need to maintain runtime-checked table of 'nd6-free'
interfaces (see nd6_need_cache()).
Fix this behavior by eliminating first ND lookup. To be more specific:
* make all nd6_output() consumers use nd6_output_ifp() instead
* rename nd6_output[_slow]() to nd6_resolve_[slow]()
* convert nd6_resolve() and nd6_resolve_slow() to arpresolve() semantics,
e.g. copy L2 address to buffer instead of pushing packet towards lower
layers
* Make all nd6_storelladdr() users use nd6_resolve()
* eliminate nd6_storelladdr()
The resulting callchain is the following:
ip6_output() -> nd6_output_ifp() -> (whatever)_output() -> nd6_resolve()
Error handling:
Currently sending packet to non-existing la results in ip6_<output|forward>
-> nd6_output() -> nd6_output _lle() which returns 0.
In new scenario packet is propagated to <ether|whatever>_output() ->
nd6_resolve() which will return EWOULDBLOCK, and that result
will be converted to 0.
(And EWOULDBLOCK is actually used by IB/TOE code).
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D1469
* Move isRouter calculation code to separate nd6_is_router() function.
* Make nd6_cache_lladdr() return void: its return value hasn't been used
since r53541 KAME import in 1999.
Sponsored by: Yandex LLC
without holding afdata wlock
* convert per-af delete_address callback to global lltable_delete_entry() and
more low-level "delete this lle" per-af callback
* fix some bugs/inconsistencies in IPv4/IPv6 ifscrub procedures
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D3573
Before that, the logic besides lle_create() was the following:
return existing if found, create if not. This behaviour was error-prone
since we had to deal with 'sudden' static<>dynamic lle changes.
This commit fixes bunch of different issues like:
- refcount leak when lle is converted to static.
Simple check case:
console 1:
while true;
do for i in `arp -an|awk '$4~/incomp/{print$2}'|tr -d '()'`;
do arp -s $i 00:22:44:66:88:00 ; arp -d $i;
done;
done
console 2:
ping -f any-dead-host-in-L2
console 3:
# watch for memory consumption:
vmstat -m | awk '$1~/lltable/{print$2}'
- possible problems in arptimer() / nd6_timer() when dropping/reacquiring
lock.
New logic explicitly handles use-or-create cases in every lla_create
user. Basically, most of the changes are purely mechanical. However,
we explicitly avoid using existing lle's for interface/static LLE records.
* While here, call lle_event handlers on all real table lle change.
* Create lltable_free_entry() calling existing per-lltable
lle_free_t callback for entry deletion
* Move lle creation/deletion from lla_lookup to separate functions:
lla_lookup(LLE_CREATE) -> lla_create
lla_lookup(LLE_DELETE) -> lla_delete
lla_create now returns with LLE_EXCLUSIVE lock for lle.
* Provide typedefs for new/existing lltable callbacks.
Reviewed by: ae
because a link where looped back NS messages are permanently observed
does not work with either NDP or ARP for IPv4.
- draft-ietf-6man-enhanced-dad is now RFC 7527.
Discussed with: hiren
MFC after: 3 days
- Add no_dad and ignoreloop per-IF knob. no_dad disables DAD completely,
and ignoreloop is to prevent infinite loop in loopback probing state when
loopback is permanently expected.
draft-ietf-6man-enhanced-dad-13.
This basically adds a random nonce option (RFC 3971) to NS messages
for DAD probe to detect a looped back packet. This looped back packet
prevented DAD on some pseudo-interfaces which aggregates multiple L2 links
such as lagg(4).
The length of the nonce is set to 6 bytes. This algorithm can be disabled by
setting net.inet6.ip6.dad_enhanced sysctl to 0 in a per-vnet basis.
Reported by: hiren
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D1835
hold mbuf chain instead of calling full-blown nd6_output_lle()
for each packet. This simplifies both callers and nd6_output_lle()
implementation.
* Make nd6_output_lle() static and remove now-unused lle and chain
arguments.
* Rename nd6_output_flush() -> nd6_flush_holdchain() to be consistent.
* Move all pre-send transmit hooks to newly-created nd6_output_ifp().
Now nd6_output(), nd6_output_lle() and nd6_flush_holdchain() are using
it to send mbufs to if_output.
* Remove SeND hook from nd6_na_input() because it was implemented
incorrectly since the beginning (r211501):
- it tagged initial input mbuf (m) instead of m_hold
- tagging _all_ mbufs in holdchain seems to be wrong anyway.
number of races which could cause double frees or use-after-frees when
performing DAD on an address. In particular, an IPv6 address can now only be
marked as a duplicate from the DAD callout.
Differential Revision: https://reviews.freebsd.org/D1258
Reviewed by: ae, hrs
Reported by: rstone
MFC after: 1 month
* Set ia address/mask values BEFORE attaching to address lists.
Inet6 address assignment is not atomic, so the simplest way to
do this atomically is to fill in ia before attach.
* Validate irfa->ia_addr field before use (we permit ANY sockaddr in old code).
* Do some renamings:
in6_ifinit -> in6_notify_ifa (interaction with other subsystems is here)
in6_setup_ifa -> in6_broadcast_ifa (LLE/Multicast/DaD code)
in6_ifaddloop -> nd6_add_ifa_lle
in6_ifremloop -> nd6_rem_ifa_lle
* Split working with LLE and route announce code for last two.
Add temporary in6_newaddrmsg() function to mimic current rtsock behaviour.
* Call device SIOCSIFADDR handler IFF we're adding first address.
In IPv4 we have to call it on every address change since ARP record
is installed by arp_ifinit() which is called by given handler.
IPv6 stack, on the opposite is responsible to call nd6_add_ifa_lle() so
there is no reason to call SIOCSIFADDR often.
It stops treating the address on the interface as special by source
address selection rule even when the interface is outgoing interface.
This is desired in some situation.
Requested by: hrs
Reviewed by: IHANet folks including hrs
MFC after: 1 week
implementation of RFC 3484 for this purpose for a long time and "prefer_source"
was never implemented actually. ND6_IFF_PREFER_SOURCE macro is left intact.
after its installation. This removal may be accidental and can
prevent the default route from being installed in the future if
the associated default router has the best preference. The cause
is the lack of status update in the default router on the state
of its route installation in the kernel FIB. This patch fixes
the described problem.
Reviewed by: hrs, discussed with hrs
MFC after: 5 days
- A new per-interface knob IFF_ND6_NO_RADR and sysctl IPV6CTL_NO_RADR.
This controls if accepting a route in an RA message as the default route.
The default value for each interface can be set by net.inet6.ip6.no_radr.
The system wide default value is 0.
- A new sysctl: net.inet6.ip6.norbit_raif. This controls if setting R-bit in
NA on RA accepting interfaces. The default is 0 (R-bit is set based on
net.inet6.ip6.forwarding).
Background:
IPv6 host/router model suggests a router sends an RA and a host accepts it for
router discovery. Because of that, KAME implementation does not allow
accepting RAs when net.inet6.ip6.forwarding=1. Accepting RAs on a router can
make the routing table confused since it can change the default router
unintentionally.
However, in practice there are cases where we cannot distinguish a host from
a router clearly. For example, a customer edge router often works as a host
against the ISP, and as a router against the LAN at the same time. Another
example is a complex network configurations like an L2TP tunnel for IPv6
connection to Internet over an Ethernet link with another native IPv6 subnet.
In this case, the physical interface for the native IPv6 subnet works as a
host, and the pseudo-interface for L2TP works as the default IP forwarding
route.
Problem:
Disabling processing RA messages when net.inet6.ip6.forwarding=1 and
accepting them when net.inet6.ip6.forward=0 cause the following practical
issues:
- A router cannot perform SLAAC. It becomes a problem if a box has
multiple interfaces and you want to use SLAAC on some of them, for
example. A customer edge router for IPv6 Internet access service
using an IPv6-over-IPv6 tunnel sometimes needs SLAAC on the
physical interface for administration purpose; updating firmware
and so on (link-local addresses can be used there, but GUAs by
SLAAC are often used for scalability).
- When a host has multiple IPv6 interfaces and it receives multiple RAs on
them, controlling the default route is difficult. Router preferences
defined in RFC 4191 works only when the routers on the links are
under your control.
Details of Implementation Changes:
Router Advertisement messages will be accepted even when
net.inet6.ip6.forwarding=1. More precisely, the conditions are as
follow:
(ACCEPT_RTADV && !NO_RADR && !ip6.forwarding)
=> Normal RA processing on that interface. (as IPv6 host)
(ACCEPT_RTADV && (NO_RADR || ip6.forwarding))
=> Accept RA but add the router to the defroute list with
rtlifetime=0 unconditionally. This effectively prevents
from setting the received router address as the box's
default route.
(!ACCEPT_RTADV)
=> No RA processing on that interface.
ACCEPT_RTADV and NO_RADR are per-interface knob. In short, all interface
are classified as "RA-accepting" or not. An RA-accepting interface always
processes RA messages regardless of ip6.forwarding. The difference caused by
NO_RADR or ip6.forwarding is whether the RA source address is considered as
the default router or not.
R-bit in NA on the RA accepting interfaces is set based on
net.inet6.ip6.forwarding. While RFC 6204 W-1 rule (for CPE case) suggests
a router should disable the R-bit completely even when the box has
net.inet6.ip6.forwarding=1, I believe there is no technical reason with
doing so. This behavior can be set by a new sysctl net.inet6.ip6.norbit_raif
(the default is 0).
Usage:
# ifconfig fxp0 inet6 accept_rtadv
=> accept RA on fxp0
# ifconfig fxp0 inet6 accept_rtadv no_radr
=> accept RA on fxp0 but ignore default route information in it.
# sysctl net.inet6.ip6.norbit_no_radr=1
=> R-bit in NAs on RA accepting interfaces will always be set to 0.
"Whitspace" churn after the VIMAGE/VNET whirls.
Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.
Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.
This also removes some header file pollution for putatively
static global variables.
Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.
Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days
automatic link-local address configuration:
- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.
- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.
- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.
- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.
- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".
Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.
While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.
Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.
Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
missed under VIMAGE_GLOBAL.
Start putting the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
While there garbage collect a few dead externs from ip6_var.h.
Sponsored by: The FreeBSD Foundation
