later by TCP-MD5 code.
This fixes the problem with broken TCP-MD5 over IPv4 when NIC has
disabled TCP checksum offloading.
PR: 223835
MFC after: 1 week
the module interface.
This is the more common approach and the syscall_helper interface is
easier to understand.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14251
This is a first part of the change. It makes the drivers to calculate
the required number of chain frames to satisfy worst case scenarios, but
it does not change existing overly strict limits on them. The next step
will be to rewrite the allocator to not require megabytes of physically
contiguous address space, that may be problematic if done after boot,
after doing which the limits can be removed. Until that this code can
just correct user set limits, if they are set too high.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14261
r328113 and affecting SMP systems.
The way the time is set on PowerMacs is racy and relies on all the
CPUs in the system setting a register simultaneously in a rendezvous. A
few-cycle delay can result in out-of-sync times, which can break the
scheduler and result in calls like mtx_sleep() and pause() never timing out
if the thread is migrated while sleeping. r328113 added a call to a no-op
function between the beginning of the rendezvous and setting the time that
was only called on APs and added enough cycles to cause a problematic offset.
For some reason, the fan-management code was the first place this appeared.
Clue from: andreast
Reported by: many
to make the order of operations clearer to avoid the race condition
that was fixed in r328914. In particular, this commit corrects a
similar race that existed in the soft updates callback.
Doing some sleuthing through the SVN repository, it appears that
bufdone_finish() was added to support XFS:
------------------------------------------------------------------------
r153192 | rodrigc | 2005-12-06 19:39:08 -0800 (Tue, 06 Dec 2005) | 13 lines
Changes imported from XFS for FreeBSD project:
- add fields to struct buf (needed by XFS)
- 3 private fields: b_fsprivate1, b_fsprivate2, b_fsprivate3
- b_pin_count, count of pinned buffer
- add new B_MANAGED flag
- add breada() function to initiate asynchronous I/O on read-ahead blocks.
- add bufdone_finish(), bpin(), bunpin_wait() functions
Patches provided by: kan
Reviewed by: phk
Silence on: arch@
------------------------------------------------------------------------
It does not appear to ever have been used for anything else. XFS was
disconnected in r241607:
------------------------------------------------------------------------
r241607 | attilio | 2012-10-16 03:04:00 -0700 (Tue, 16 Oct 2012) | 5 lines
Disconnect non-MPSAFE XFS from the build in preparation for dropping
GIANT from VFS.
This is not targeted for MFC.
------------------------------------------------------------------------
and removed entirely in r247631:
------------------------------------------------------------------------
r247631 | attilio | 2013-03-02 07:33:54 -0800 (Sat, 02 Mar 2013) | 5 lines
Garbage collect XFS bits which are now already completely disconnected
from the tree since few months.
This is not targeted for MFC.
------------------------------------------------------------------------
Since XFS support is gone, there is no reason to retain biodone_finish().
Suggested by: Warner Losh (imp)
Discussed with: cem, kib
Tested by: Peter Holm (pho)
mappings for the pages used for the kernel and some initial allocations
used for the page table. It maps the kernel and the blocks used for
these initial allocations using 2MB pages.
However, if the kernel does not end on a 2MB boundary, it still maps the
last portion using a 2MB page, but reports that the unused 4K blocks
within this 2MB allocation are free physical blocks. This means that
these same physical blocks could also be mapped elsewhere - for example,
into a user process. Given the proximity to the kernel text and data
area, it seems wise to avoid allowing someone to write data to physical
blocks also mapped into these virtual addresses.
(Note that this isn't a security vulnerability: the direct map makes
most/all memory on the system mapped into kernel space. And, nothing
in the kernel should be trying to access these pages, as the virtual
addresses are unused. It simply seems wise to avoid reusing these
physical blocks while they are mapped to virtual addresses so close
to the kernel text and data area.)
Consequently, let's reserve the physical blocks covered by the
page-table mappings for these initial allocations.
Reviewed by: kib, markj
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14268
size of UMA zone allocation is greater than page size. In this case zone
of zones can not use UMA_MD_SMALL_ALLOC, and we need to postpone switch
off of this zone from startup_alloc() until full launch of VM.
o Always supply number of VM zones to uma_startup_count(). On machines
with UMA_MD_SMALL_ALLOC ignore it completely, unless zsize goes over
a page. In the latter case account VM zones for number of allocations
from the zone of zones.
o Rewrite startup_alloc() so that it will immediately switch off from
itself any zone that is already capable of running real alloc.
In worst case scenario we may leak a single page here. See comment
in uma_startup_count().
o Hardcode call to uma_startup2() into vm_mem_init(). Otherwise some
extra SYSINITs, e.g. vm_page_init() may sneak in before.
o While here, remove uma_boot_pages_mtx. With recent changes to boot
pages calculation, we are guaranteed to use all of the boot_pages
in the early single threaded stage.
Reported & tested by: mav
icmp6_redirect_input() validates that a redirect packet came from the
current gateway for the respective destination. To do this, it compares
the source address, which has an embedded scope zone id, to the next-hop
address, which does not. If the address is link-local, which should be
the case, the comparison fails and the redirect is ignored.
Insert the scope zone id into the next-hop address so the comparison
is accurate.
Unsurprisingly, this fixes 35 UNH IPv6 conformance test cases.
Submitted by: Farrell Woods <Farrell_Woods@Dell.com> (initial revision)
Reviewed by: ae melifaro dab
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14254
folks running filesystems created on check-hash enabled kernels
(which I will call "new") on a non-check-hash enabled kernels (which
I will call "old). The idea here is to detect when a filesystem is
run on an old kernel and flag the filesystem so that when it gets
moved back to a new kernel, it will not start getting a slew of
check-hash errors.
Back when the UFS version 2 filesystem was created, it added a file
flag FS_INDEXDIRS that was to be set on any filesystem that kept
some sort of on-disk indexing for directories. The idea was precisely
to solve the issue we have today. Specifically that a newer kernel
that supported indexing would be able to tell that the filesystem
had been run on an older non-indexing kernel and that the indexes
should not be used until they had been rebuilt. Since we have never
implemented on-disk directory indicies, the FS_INDEXDIRS flag is
cleared every time any UFS version 2 filesystem ever created is
mounted for writing.
This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH
flag. Thus, the FS_METACKHASH is definitively known to have always
been cleared. The FS_INDEXDIRS flag has been moved to a new block
of flags that will always be cleared starting with this commit
(until they get used to implement some future feature which needs
to detect that the filesystem was mounted on a kernel that predates
the new feature).
If a filesystem with check-hashes enabled is mounted on an old
kernel the FS_METACKHASH flag is cleared. When that filesystem is
mounted on a new kernel it will see that the FS_METACKHASH has been
cleared and clears all of the fs_metackhash flags. To get them
re-enabled the user must run fsck (in interactive mode without the
-y flag) which will ask for each supported check hash whether it
should be rebuilt and enabled. When fsck is run in its default preen
mode, it will just ignore the check hashes so they will remain
disabled.
The kernel has always disabled any check hash functions that it
does not support, so as more types of check hashes are added, we
will get a non-surprising result. Specifically if filesystems get
moved to kernels supporting fewer of the check hashes, those that
are not supported will be disabled. If the filesystem is moved back
to a kernel with more of the check-hashes available and fsck is run
interactively to rebuild them, then their checking will resume.
Otherwise just the smaller subset will be checked.
A side effect of this commit is that filesystems running with
cylinder-group check hashes will stop having them checked until
fsck is run to re-enable them (since none of them currently have
the FS_METACKHASH flag set). So, if you want check hashes enabled
on your filesystems after booting a kernel with these changes, you
need to run fsck to enable them. Any newly created filesystems will
have check hashes enabled. If in doubt as to whether you have check
hashes emabled, run dumpfs and look at the list of enabled flags
at the end of the superblock details.
Fix for #31362 - ms_abi is implemented incorrectly for values >=16
bytes.
Summary:
This patch is a fix for following issue:
https://bugs.llvm.org/show_bug.cgi?id=31362 The problem was caused by
front end lowering C calling conventions without taking into account
calling conventions enforced by attribute. In this case win64cc was
no correctly lowered on targets other than Windows.
Reviewed By: rnk (Reid Kleckner)
Differential Revision: https://reviews.llvm.org/D43016
Author: belickim <mateusz.belicki@intel.com>
This fixes clang 6.0.0 assertions when building the emulators/wine and
emulators/wine-devel ports, and should also make it use the correct
Windows calling conventions. Bump __FreeBSD_version to make the fix
easy to detect.
PR: 224863
MFC after: 3 months
X-MFC-With: r327952
Use syscall_helper_register() to register syscalls and do it through the
module interface rather than sysinit.
This pattern is more common and easier to understand.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14232
While the bug itself was serious, as we could either pass a non-busied
page to vm_pager_get_pages() or leak a busy page, it could only be
triggered under a very rare condition where the page is already inserted
into the object, but it is not valid yet.
Reviewed by: kib
MFC after: 2 weeks
o added struct ipfw_dyn_info that keeps all needed for ipfw_chk and
for dynamic states implementation information;
o added DYN_LOOKUP_NEEDED() macro that can be used to determine the
need of new lookup of dynamic states;
o ipfw_dyn_rule now becomes obsolete. Currently it used to pass
information from kernel to userland only.
o IPv4 and IPv6 states now described by different structures
dyn_ipv4_state and dyn_ipv6_state;
o IPv6 scope zones support is added;
o ipfw(4) now depends from Concurrency Kit;
o states are linked with "entry" field using CK_SLIST. This allows
lockless lookup and protected by mutex modifications.
o the "expired" SLIST field is used for states expiring.
o struct dyn_data is used to keep generic information for both IPv4
and IPv6;
o struct dyn_parent is used to keep O_LIMIT_PARENT information;
o IPv4 and IPv6 states are stored in different hash tables;
o O_LIMIT_PARENT states now are kept separately from O_LIMIT and
O_KEEP_STATE states;
o per-cpu dyn_hp pointers are used to implement hazard pointers and they
prevent freeing states that are locklessly used by lookup threads;
o mutexes to protect modification of lists in hash tables now kept in
separate arrays. 65535 limit to maximum number of hash buckets now
removed.
o Separate lookup and install functions added for IPv4 and IPv6 states
and for parent states.
o By default now is used Jenkinks hash function.
Obtained from: Yandex LLC
MFC after: 42 days
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D12685
Remove most of the Atmel at91 boards. Most of them are no longer
relevant or used by people. Kept ATMEL since it should work on all the
boards that still work (I've not confirmed this, since I don't have
all these boards). Also kept SAM9G20EK, since I have several boards
that it is used on. If I've deleted a kernel in error, please let me
know.
o Most of startup zones have struct uma_slab embedded into the slab,
so provide macro UMA_SLAB_SPACE and use it instead of UMA_SLAB_SIZE,
when calculating how many pages would certain kind of allocations
require. Some zones are offpage, so we might have a positive inaccuracy.
o The keg for the zone of zones is allocated "dynamically", so we
need +1 when calculating amount of pages for kegs. [1]
o The zones of zones and zones of kegs have arbitrary alignment of 32,
and this also needs to be accounted for. [2]
While here, spread more comments and improve diagnostic messages.
Reported by: pho [1], jtl [2]
The _Alignas specifier must come before the declaration and not after. It
works if _Alignas() expands to __attribute__(aligned(x)) which was the only
case I tested before.
Approved By: jhb (mentor)
Previously, wiring a page would cause it to be removed from its page
queue. In the common case, unwiring causes it to be enqueued at the tail
of that page queue. This change modifies vm_page_wire() to not dequeue
the page, thus avoiding the highly contended page queue locks. Instead,
vm_page_unwire() takes care of requeuing the page as a single operation,
and the page daemon dequeues wired pages as they are encountered during
a queue scan to avoid needlessly revisiting them later. For pages in
PQ_ACTIVE we do even better, since a requeue is unnecessary.
The change improves scalability for some common workloads. For instance,
threads wiring pages into the buffer cache no longer need to modify
global page queues, and unwiring is usually done by the bufspace thread,
so concurrency is not as much of an issue. As another example, many
sysctl handlers wire the output buffer to avoid faults on copyout, and
since the buffer is likely to be in PQ_ACTIVE, we now entirely avoid
modifying the page queue in this case.
The change also adds a block comment describing some properties of
struct vm_page's reference counters, and the busy lock.
Reviewed by: jeff
Discussed with: alc, kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D11943
actually return the computed result instead of the input value.
This is a regression issue after r289572.
Found by: gcc6
MFC after: 3 days
Sponsored by: Mellanox Technologies
For DWDS VAPs on ath(4) we need to ensure that the STA vap and hostap VAP
have different MAC addresses. If the STA code path doesn't utilise the
address assign / reclaim path then it doesn't update the bitmap with which
address was allocated.
This should fix a bunch of corner issues I've been seeing with DWDS STA + AP
VAPs that I was working around with manual MAC address assignment.
On the OrangePi One at least, emac reset when an ethernet cable is not
plugged in seems to break ethernet. Soft reset will fail, even with
increasing the delay and retries to wait for up to 20 seconds. This can be
reproduced across at least two different OrangePi One's by simply leaving
ethernet cable unplugged when awg attaches. Whether it's plugged in or not
through u-boot process makes no difference.
Skipping the reset in this configuration doesn't seem to cause any problems,
tried across many many reboots with and without ethernet cable plugged in.
Tested on: OrangePi One
Tested on: Other boards (manu)
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13974
ncookies cannot be negative or the allocator will fail. This should only
happen if a caller is very broken but we can still try to survive the
event.
We should probably also verify for uio_resid > MAXPHYS but in that case
it is not clear that just clipping the ncookies value is an adequate
response.
MFC after: 2 weeks
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
o Call uma_startup1() after initializing kmem, vmem and domains.
o Include 8 eight VM startup pages into uma_startup_count() calculation.
o Account for vmem_startup() and vm_map_startup() preallocating pages.
o Account for extra two allocations done by kmem_init() and vmem_create().
o Hardcode the place of execution of vm_radix_reserve_kva(). Using SYSINIT
allowed several other SYSINITs to sneak in before it, thus bumping
requirement for amount of boot pages.
a bit in the normal operation of the driver. Covert it to represent bytes
instead of 32bit words. Fix what I believe to be is a bug in this respect
with the Tri-mode cards.
Sponsored by: Netflix
Since synchronization reads are performed by submitting a request to
the external mirror provider, we know that the request returns with an
error only when gmirror was unable to read a copy of the block from any
mirror. Thus, there is no need to retry the request from the
synchronization error handler.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Both drivers were found to report CAM bigger queue depth then they really
can handle. It made them later under high load with many disks return
some of submitted requests back with CAM_REQUEUE_REQ status for later
resubmission.
Reviewed by: scottl
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14215
In mp{r,s}_diag_register(), which is used to register diagnostic
buffers with the mp{r,s}(4) firmware, we allocate DMAable memory.
There were several issues here:
o No checking of the bus_dmamap_load() return value. If the load
failed or got deferred, mp{r,s}_diag_register() continued on as if
nothing had happened. We now check the return value and bail
out if it fails.
o No waiting for a deferred load callback. bus_dmamap_load()
calls a supplied callback when the mapping is done. This is
generally done immediately, but it can be deferred.
mp{r,s}_diag_register() did not check to see whether the callback
was already done before proceeding on. We now sleep until the
callback is done if it is deferred.
o No call to bus_dmamap_sync(... BUS_DMASYNC_PREREAD) after the
memory is allocated and loaded. This is necessary on some
platforms to synchronize host memory that is going to be updated
by a device.
Both drivers would also panic if the firmware was reinitialized while
a diagnostic buffer operation was in progress. This fixes that problem
as well. (The driver will reinitialize the firmware in various
circumstances, but the problem I ran into was that the firmware would
generate an IOC Fault due to a PCIe error.)
mp{r,s}var.h:
Add a new structure, struct mpr_busdma_context, that is
used for deferred busdma load callbacks.
Add a prototype for mp{r,s}_memaddr_wait_cb().
mp{r,s}.c:
Add a new busdma callback function, mp{r,s}_memaddr_wait_cb().
This provides synchronization for callers that want to
wait on a deferred bus_dmamap_load() callback.
mp{r,s}_user.c:
In bus_dmamap_register(), add a call to bus_dmamap_sync()
with the BUS_DMASYNC_PREREAD flag set after an allocation
is loaded.
Also, check the return value of bus_dmamap_load(). If it
fails, bail out. If it is EINPROGRESS, wait for the
callback to happen. We use an interruptible sleep (msleep
with PCATCH) and let the callback clean things up if we get
interrupted.
In mpr_diag_read_buffer() and mps_diag_read_buffer(), call
bus_dmamap_sync(..., BUS_DMASYNC_POSTREAD) before copying
the data out to make sure the data is in stable storage.
In mp{r,s}_post_fw_diag_buffer() and
mp{r,s}_release_fw_diag_buffer(), check the reply to see
whether it is NULL. It can be NULL (and the command non-NULL)
if the controller gets reinitialized while we're waiting for
the command to complete but the driver structures aren't
reallocated. The driver structures generally won't be
reallocated unless there is a firmware upgrade that changes
one of the IOCFacts.
When freeing diagnostic buffers in mp{r,s}_diag_register()
and mp{r,s}_diag_unregister(), zero/NULL out the buffer after
freeing it. This will prevent a duplicate free in some
situations.
Sponsored by: Spectra Logic
Reviewed by: mav, scottl
MFC after: 1 week
Differential Revision: D13453
The compiler/linker can align fake_preload anyway it would like. When
building the kernel with gcc+bfd this always happened to be a multiple of 8.
When I built the kernel with clang and linked with lld fake_preload
happened to only be aligned to 4 bytes which caused a an ADDRS trap because
the compiler will emit sd instructions to store to this buffer.
Reviewed By: jhb, imp
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D14018
FreeBSD boots on this board, but the ethernet switch is not currently
supported, resulting in no ethernet.
A U-Boot port will be added once the ethernet switch is at least basically
supported, but we add its DTS to the build here to lower the barrier-to-boot
while work is underway.
Switches that originate their own frames (eg obvious ones like Pause frames)
need a MAC address to use to send those frames from.
This API will hopefully begin to allow that to be configurable.
SGList elements, but there's only enough space in the request frame for
either 1 element or a chain frame pointer. Previously, the code would
hit the wrong case, add the SGList element, but then fail to add the
chain frame due to lack of space. Re-arrange the code to catch this case
earlier and handle it.
Sponsored by: Netflix
