truncated to 32 bits.
* Change the calling convention of the device mmap entry point to
pass a vm_offset_t instead of an int for the offset allowing
devices with a larger memory map than (1<<32) to be supported
on the alpha (/dev/mem is one such).
These changes are required to allow the X server to mmap the various
I/O regions used for device port and memory access on the alpha.
for the Lite2 fix for always returning EIO in dead_read().
Cleaned up the cdevswitch initializers for all tty drivers.
Removed explicit calls to ttsetwater() from all (tty) drivers. ttsetwater()
is now called centrally for opens, not just for parameter changes.
I don't have access to a real VT220 to verify this against.
However, I'm committing the patch in `good faith' because
(a) getting hold of a real VT220 is going to be increasingly difficult
the longer the PR sits around,
(b) some one was troubled enough to in a PR and
(c) the fix is minor and has no other implications.
PR: 7559
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
"time" wasn't a atomic variable, so splfoo() protection were needed
around any access to it, unless you just wanted the seconds part.
Most uses of time.tv_sec now uses the new variable time_second instead.
gettime() changed to getmicrotime(0.
Remove a couple of unneeded splfoo() protections, the new getmicrotime()
is atomic, (until Bruce sets a breakpoint in it).
A couple of places needed random data, so use read_random() instead
of mucking about with time which isn't random.
Add a new nfs_curusec() function.
Mark a couple of bogosities involving the now disappeard time variable.
Update ffs_update() to avoid the weird "== &time" checks, by fixing the
one remaining call that passwd &time as args.
Change profiling in ncr.c to use ticks instead of time. Resolution is
the same.
Add new function "tvtohz()" to avoid the bogus "splfoo(), add time, call
hzto() which subtracts time" sequences.
Reviewed by: bde
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)
LFS is temporarily disabled, and will be re-enabled tomorrow.
i was at it, do no longer insist on `PCVT_FREEBSD' being declared in
the config file, but default it to a reasonable value.
More cleanup to follow, but this part is safe for RELENG_2_2, too.
was 0.
PR: 4164
Submitted by: Joe Traister <traister@mojozone.org>
While i was at it, also fixed a broken return value for the VT_RELDISP
ioctl, iff the third arg was legally VT_TRUE, but the destination
screen was in process mode so the actual switch had to be deferred.
This was breaking the ability to directly toggle between two X servers
running on two VTs, since the server getting the bogus error return
was running wild, and competing with the other one for the hardware.
(Sigh, this was a very long-standing bug.)
type mismatches. There was no problem in practice (at least on 386's).
Don't cast NULL in calls to timeout functions. pcvt is fully prototyped
and doesn't support K&R.
Timeout functions take args of type `void *', so use magic numbers of
type `void *' for UPDATE_* to reduce the danger of wrong conversions.
Removed FreeBSD-pre-1.1-related TIMEOUT_FUNC_T macro. It was especially
bogus for the pre-1.1 case.
1) Dell Latitude XPi
This laptop has a strange, IMHO broken :-), keyboard controller which
wouldn't disable the keyboard interrupt. The kludge is to disable tty
intr. during set_keyboard(), used for changing LED and setting
typematic.
The patch also changes the function name:
set_keyboard() -> set_keyboard_param()
Although it is a static function, the name corrides with a routine in
`syscons' and is confusing when debugging the kernel which has both
`syscons' and `pcvt' with DDB. (Suggested by Bruce)
2) doreset() bug
doreset() failed to preserve some bits in the keyboard controller's
command byte during keyboard reset. This bug may put some keyboard
controllers in old motherboards (386 and 486) in a strange state,
resulting in complete keyboard lockup or random key input.
Reviewed by: Joerg
form `tv = time'. Use a new function gettime(). The current version
just forces atomicicity without fixing precision or efficiency bugs.
Simplified some related valid accesses by using the central function.
effect immediately, but required a following (normally redundant) G0
into GL mapping. This adds one layer of indirection (thus might make it
slower), but fixes the broken box character drawing in pcvt.
Hellmuth and Bruce are unfortunately too busy too review this right now,
but i wanna have it in 2.2 since it has often been asked in the past.
Warning: this won't work yet with PCVT_SCANSET=2 along in early
console mode (boot -c, or boot -d).
A big thanks to Kazutaka, and a word of apologies for delaying the
review for that long time...
Submitted by: yokota@zodiac.mech.utsunomiya-u.ac.jp (Kazutaka YOKOTA)
changes to the keyboard code in pcvt, this update_led() very often
caused pcvt to hang early at boot time.
(Eventually, a better solution should be found, but the simple
omission serves well as a workaround for something that is actually a
show-stopper class problem.)
Candidate for 2.2.
controllers, it is an error to issue a command before the keyboard
has had time to reply to the previous command. Setting the LEDs
involves issueing 2 commands, so it never worked on these keyboards.
Fixed resetting of keyboard. It is possible for unprocessed
scancodes to be present when the reset routine is called. This
usually occurs after switching from one console driver to another
in userconfig. pcvt and syscons attempt to flush any stale scancodes,
but sometimes fail to do so because keyboard and/or keyboard
controller takes a long time to send the scancodes after reset
(scancodes are apparently not flushed by reset!). syscons handles
this later by not checking for errors at strategic places, but pcvt
was confused.
Use an impossible initial and failure mode setting for the LEDs
so that the LEDs always get set if they are possibly out of sync.
Added missing spltty() in update_led().
instead of 0 if there is no input.
pcvt_drv.c:
Partially fixed pccncheckc(). It returned a boolean value instead of
the character that it fetches from the input fifo (if any). I think
it still discards characters after the first for multi-char input.
. preserve a multi-char sequence in a small static buffer inside
pccngetc(), so it won't be clobbered later (used to happen when
breaking into DDB user Ctrl-Alt-ESC), and
. simplify the ``keystroke is present'' determination in sgetc(), thus
making pccncheck() actually working without waiting for a keystroke.
. make pccncheck() work even when interrupts are disabled, so the
``Press a key on the console...'' procedure will work,
. make kernel colors #ifndef, so they can be overridden from the
config file,
. use shutdown_nice() instead of cpu_reset() if Ctrl-Alt-Del is
enabled,
. allow pccngetc() to return more than a single character, so the
arrow keys will work (and thus visual UserConfig!),
. fix a warning.
This closes all know PRs related to pcvt, in particular #845, #1236,
and #1265. PR #991 is a duplicate for 845, and PR #1283 has already
been fixed earlier in rev 1.11 of pcvt_conf.h.
Submitted by: Ulf Kieber (kieber@sax.de), for the kernel color fix
