This basically mirrors what already exists in ddb, but provides a
slightly improved interface. It allows the caller to specify the
watchpoint access type, and returns more specific error codes to
differentiate failure cases.
This will be used to support hardware watchpoints in gdb(4).
Stubs are provided for architectures lacking hardware watchpoint logic
(mips, powerpc, riscv), while other architectures are added individually
in follow-up commits.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This per-driver callback is invoked by netmap when it wants
to align the number of TX/RX netmap rings and/or the number of
TX/RX netmap slots to the actual state configured in the hardware.
The alignment happens when netmap mode is switched on (with no
active netmap file descriptors for that netmap port), or when
collecting netmap port information.
MFC after: 1 week
Without this patch, sh can autocomplete file names but not commands from
$PATH. Use libedit's facility to execute custom function for autocomplete,
but yield to the library's standard autocomplete function when cursor is
not at position 0.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29361
In tcp_hostcache_list, the sbuf used would need a large (~2MB)
blocking allocation of memory (M_WAITOK), when listing a
full hostcache. This may stall the requestor for an indeterminate
time.
A further optimization is to return the expected userspace
buffersize right away, rather than preparing the output of
each current entry of the hostcase, provided by: @tuexen.
This makes use of the ready-made functions of sbuf to work
with sysctl, and repeatedly drain the much smaller buffer.
PR: 254333
MFC after: 2 weeks
Reviewed By: #transport, tuexen
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D29471
When loading a direct-boot kernel, a temporary route is being installed,
the NFS handle is acquired, and the temporary route is removed again.
This was being done inside a net epoch, but since the krpc code is written
using blocking APIs, we can't actually do that, because sleeping is not
allowed during a net epoch.
Exit and reenter the epoch so we are only in the epoch when doing the
routing table manipulation.
Fixes panic when booting my RB800 over NFS (where the kernel is loaded
using RouterBOOT directly.)
Reviewed by: melifaro
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D29464
Vinum is a Logical Volume Manager that was introduced in FreeBSD 3.0,
and for FreeBSD 5 was ported to geom(4) as gvinum. gvinum has had no
specific development at least as far back as 2010, and has a number of
known bugs which are unlikely to be resolved.
Add a deprecation notice to raise awareness but state that vinum "may
not be" available in FreeBSD 14. Either it will be removed and the
notice will be updated to "is not" available, or someone will step up
to fix issues and maintain it and we will remove the notice.
Reviewed by: imp (earlier version)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29424
Use strncmp() instead of bcmp(), so that we don't have to find the
minimum of the string lengths before comparing.
Reviewed by: kib
Reported by: KASAN
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29463
make "vital" a replaceable, which defaults to "false" and only set it for
the main clib, utilities and runtime packages, not their sub-packages
PR: 254174
Differential Revision: https://reviews.freebsd.org/D29224
At this point in startup, vm_ndomains has not been initialized. Switch
to checking kenv instead.
Fixes incorrect NUMA information being set on multi-domain systems like
Talos II.
Submitted by: jhibbits
MFC after: 2 weeks
Summary:
Since powerpcspe doesn't have a traditional FPU, there's no FPSCR, and
no FPRs. Attempting to use them triggers an illegal instruction trap.
Fix this unconditional cleanup of FPSCR by conditionalizing it on the
FPU being used in the outgoing thread.
Reviewed By: bdragon
Differential Revision: https://reviews.freebsd.org/D29452
pmap_enter(PMAP_ENTER_LARGEPAGE) may return KERN_PROTECTION_FAILURE due to
PKRU inconsistency. Handle it in the call place from vm_fault_populate(),
and in places which decode errors from vm_fault_populate()/
vm_fault_allocate().
Reviewed by: jah, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29442
When prefixes such as struct, union, etc. are compared with the current
type (e.g. struct foo), a comparison is made with the prefix. The code
currently assumes that every type is a valid C type with a prefix,
however at times, garbage ends up in this function causing an
unpredictable crash with DTrace due to the isspace(*p) call or
subsequent calls. An example that I've seen of this is the letter 's'
being passed in, comparing true with struct as the comparison size was
(q - p) == 1, but then we increment p with the length of "struct",
resulting in an out of bounds read.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29435
Some filesystems assume that they can copy a name component, with length
bounded by NAME_MAX, into a dirent buffer of size MAXNAMLEN. These
constants have the same value; add a compile-time assertion to that
effect.
Reported by: Alexey Kulaev <alex.qart@gmail.com>
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29431
Recent mkimg changes forces to have partitions given in explicit order.
This is so we can have the first partition starting at a specific offset
and the next ones starting after without having to specify an offset.
Switch the partition in the mkisoimage.sh script so the first one created
is the isoboot one.
PR: 254490
Reported by: Michael Dexter <editor@callfortesting.org
Tested by: Vincent Milum Jr <freebsd@darkain.com>
MFC after: Right now
`struct weightened_nhop` has spare 32bit between the fields due to
the alignment (on amd64).
Not zeroing these spare bits results in duplicating nhop groups
in the kernel due to the way how comparison works.
MFC after: 1 day
Upstream commit message:
Support running FreeBSD buildworld on Arm-based macOS hosts
Arm-based Macs are like FreeBSD and provide a full 64-bit stat from the
start, so have no stat64 variants. Thus, define stat64 and fstat64 as
aliases for the normal versions.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Closes#11771
MFC after: 1 week
This avoids some atomics by using counter_u64 for TX and relying on
existing single-threading (single ithread per rxq) for RX.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29383
This type mirrors struct sge_ofld_rxq and holds state for TCP offload
transmit queues. Currently it only holds a work queue but will
include additional state in future changes.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29382
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
Otherwise, several directories under /usr/share/terminfo will not be
cleaned up.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29355
When lockd is configured with a debug level of > 0 and foreground == 0,
the process is daemonized with a truth noclose argument to daemon().
This doesn't seem to be the desired behavior because that prevents
stdout and stderr from being closed, however, stdout and stderr aren't
used anywhere else. Furthermore, the man pages state that with a higher
debug level it will use the syslog facilities to do so.
Submitted by: Caleb St. John
Discussed with: rmacklem
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D29415
Remove unused #includes of LinuxKPI headers noticed while trying to
solve LinuxKPI struct net_device and related functions.
Neither netdevice.h nor inetdevice.h nor notifier.h seem to be needed.
This takes cxgbe(4) out of the picture of D29366.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: np
X-D-R: D29366 (extracted as further cleanup)
Differential Revision: https://reviews.freebsd.org/D29432
Remove unused #includes of a LinuxKPI header noticed while trying to
solve LinuxKPI struct net_device and related functions.
This takes qlnxr out of the picture of D29366.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
X-D-R: D29366 (extracted as further cleanup)
Remove linux/inetdevice.h as neither of the two inline functions there
are used here.
Sposored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
X-D-R: D29366 (extracted as further cleanup)
Differential Revision: https://reviews.freebsd.org/D29428
If the disk parameter "DEFAULT" is set in place of an actual device name,
or no disk is specified for the PARTITIONS parameter, the installer will
follow the logic used in the automatic-partitioning mode, in which it
will either provide a selection dialog for one of several disks if
several are present or automatically select it if there is only one. This
simplifies the creation of fully-automatic installation media for
hardware or VMs with varying disk names.
Suggested by: Egoitz Aurrekoetxea <egoitz@sarenet.es>
MFC after: 3 weeks
Relnotes: yes
Introduce struct netdev_notifier_info as a container to pass
net_device to the callback functions.
Adjust netdev_notifier_info_to_dev() to return the net_device field.
Add explicit casts from ifp to ni->dev even though currently
struct net_device is defined to struct ifnet. This is needed in
preparation for untangling this and improving the net_device compat
code.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29365
Add a net_ratelimit() compat implementation based on ppsratecheck().
Add a sysctl to allow tuning of the number of messages.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29399
When debugging leaked MSI/MSI-X vectors through LinuxKPI I found
the informational printf unhelpful. Rather than just stating we
leaked also tell how many MSI or MSI-X vectors we leak.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: jhb
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29394
net80211 changed a while back to support per-VAP config for things
rather than it being global. This is to support firmware NICs that
support per-VAP flags and configuration where the firmware will figure
out how to combine them.
However, it introduced a fun timing issue - those changes used to happen
to the shared ic state before newstate() was called, but now they're
also tasks and they can happen /after/.
This isn't a problem for ath(4), but it exposed some interesting
timing and config bugs here. Notably, I saw short slot NOT being
configured in 5GHz mode during some associations, so 5GHz stuff
would hang or behave poorly. Other times the follow-up auth has
the right config, so it didn't hang.
So for now, just flip this over to using the per-VAP flags which
are correct when newstate() is called. net80211 should also have
those flags synch'ed to the global ic state before newstate() runs
and that can come in a subsequent commit.
Whilst here also fix plcp to be consistently logged as a hex value.
Tested:
* iwn(4) Intel 6205, STA mode, both 2GHz and 5GHz
Differential Revision: https://reviews.freebsd.org/D29379
Reviewed by: bz
For filters which implement accf_create, the setsockopt(2) handler
caches the filter name in the socket, but it also incorrectly frees the
buffer containing the copy, leaving a dangling pointer. Note that no
accept filters provided in the base system are susceptible to this, as
they don't implement accf_create.
Reported by: Alexey Kulaev <alex.qart@gmail.com>
Discussed with: emaste
Security: kernel use-after-free
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The hw.cxgbe.kern_tls tunable was used for this in the past and if it
was set then all T6 adapters would be configured for NIC TLS operation
and could not be reconfigured for TOE without a reload. With this
change ifconfig can be used to manipulate toe and txtls caps like any
other caps. hw.cxgbe.kern_tls continues to work as usual but its
effects are not permanent any more.
* Enable nic_ktls_ofld in the default configuration file and use the
firmware instead of direct register manipulation to apply/rollback
NIC TLS configuration. This allows the driver to switch the hardware
between TOE and NIC TLS mode in a safe manner. Note that the
configuration is adapter-wide and not per-port.
* Remove the kern_tls config file as it works with 100G T6 cards only
and leads to firmware crashes with 25G cards. The configurations
included with the driver (with the exception of the FPGA configs) are
supposed to work with all adapters.
Reported by: Veeresh U.K. at Chelsio
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Reviewed by: jhb@
Differential Revision: https://reviews.freebsd.org/D29291
PowerISA 2.07B says that the low-order p-12 bits of the real page number
contained in ARPN and LP fields of a PTE must be 0s and are ignored
by the hardware (Book III-S, 5.7.7.1), where 2^p is the actual page size
in bytes, but we were clearing only the LP field.
This worked on bare metal and QEMU with KVM, that ignore these bits,
but caused a kernel panic on QEMU with TCG, that expects them to be
cleared.
This fixes running FreeBSD with HPT superpages enabled on QEMU
with TCG.
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
