With command serialization used in CTL, there are no other commands to abort
when PREEMPT AND ABORT gets to run, so it is practically equal to PREEMPT.
MFC after: 1 week
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
The prior change to not enable LRO by default has confused several
people. The configurations where LRO is problematic is not the
typical use case for VirtIO, and due to other issues, this often
requires checksum offloading to be disabled anyways.
PR: 185864
MFC after: 2 weeks
It isn't safe to keep unreferenced ifaddrs. Use in6ifa_ifwithaddr() to
determine ifaddr corresponding to destination address. Since currently
we keep addresses with embedded scope zone, in6ifa_ifwithaddr is called
with zero zoneid and marked with XXX.
Also remove route and lle lookups from ip6_input. Use in6ifa_ifwithaddr()
instead.
Sponsored by: Yandex LLC
gcc requires variables to be initialised in two places. One of them
is correctly used only under the same conditional though.
For module builds properly check if the kernel supports INET or INET6,
as otherwise various mips kernels without IPv6 support would fail to build.
Create a proper stack frame for amd64 version of bcopy(). Note that
this also makes the stack properly aligned in the function, despite it
is not strictly needed.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Remove duplicated sources between standard part of the kernel and
module. In particular, it caused duplicated lock initialization and
sysctl registration, both having bad consequences.
- Add missed source files to module.
- Static part of the kernel provides randomdev module, not
random_adaptors. Correct dependencies.
- Use cdev modules declaration macros.
Approved by: secteam (delphij)
Reviewed by: markm
buffer from asm to C, which reduces amount of arguments for inline asm
and simplifies constraints. Use unsigned types consistently.
Submitted by: bde
Approved by: secteam (delphij)
Reviewed by: markm
MFC after: 1 week
After resource allocation and release, resource list entry
stays non-NULL. This causes panic in ofwbus_alloc_resource()
on subsequent resource allocation.
Clean appropriate list entry on release to avoid this.
Obtained from: Semihalf
Reviewed by: ian
Sponsored by: The FreeBSD Foundation
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
Differential Revision: D1023
No objections from: net@
Relnotes: yes
Sponsored by: Yandex LLC
it, except Ethernet, where it carried ng_ether(4) pointer.
For now carry the pointer in if_l2com directly.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Support the KDB alt break sequence to enter the debugger,
panic, reboot, etc. [1]
- Provide emergency write feature description. Note that QEMU
does not implement this feature.
- Make the VTCON_FLAG_* defines sequential once again.
- When the multiple port feature is not negotiated, query the
rows and columns of the one console during the device attach
when the size feature is negotiated.
- Report failure to the device if hot plugging a port fails.
- Acknowledge the console port event with an open event. This
is required by the spec, but QEMU doesn't seem to care.
Submitted by: Juniper [1]
MFC after: 1 month
-Improved VF stability, thanks to changes from Ryan Stone,
and Juniper.
- RSS fixes in the ixlv driver
- link detection in the ixlv driver
- New sysctl's added in ixl and ixlv
- reset timeout increased for ixlv
- stability fixes in detach
- correct media reporting
- Coverity warnings fixed
- Many small bug fixes
- VF Makefile modified - nvm shared code needed
- remove unused sleep channels in ixlv_sc struct
Submitted by: Eric Joyner (committed by jfv)
MFC after: 1 week
It turns out an alignment of zero can lead to an endless loop in the
vm reservations code, so specifically disallow that. The manpage says
hardware which can do dma at any address should use a value of one, which
hints at the forbiddeness of zero without exactly saying it. Several
other conditions which could lead to insanity in working with the tag are
also checked now.
Every existing call to bus_dma_tag_create() (about 680 of them) was
eyeballed for violations of these things, and two alignment=0 glitches
were fixed. It's possible something was missed, but overall this
shouldn't lead to any arm users suddenly experiencing failures.
problems than it solves. SYSDIR is already defined almost always and
can be used instead. Working around the one case where it isn't is
much easier than working around the fact that @ may not exist in 18
other places.
Differential Revision: https://reviews.freebsd.org/D1100
Some virtual if drivers has (ab)used ifa ifa_rtrequest hook to enforce
route MTU to be not bigger that interface MTU. While ifa_rtrequest hooking
might be an option in some situation, it is not feasible to do MTU checks
there: generic (or per-domain) routing code is perfectly capable of doing
this.
We currrently have 3 places where MTU is altered:
1) route addition.
In this case domain overrides radix _addroute callback (in[6]_addroute)
and all necessary checks/fixes are/can be done there.
2) route change (especially, GW change).
In this case, there are no explicit per-domain calls, but one can
override rte by setting ifa_rtrequest hook to domain handler
(inet6 does this).
3) ifconfig ifaceX mtu YYYY
In this case, we have no callbacks, but ip[6]_output performes runtime
checks and decreases rt_mtu if necessary.
Generally, the goals are to be able to handle all MTU changes in
control plane, not in runtime part, and properly deal with increased
interface MTU.
This commit changes the following:
* removes hooks setting MTU from drivers side
* adds proper per-doman MTU checks for case 1)
* adds generic MTU check for case 2)
* The latter is done by using new dom_ifmtu callback since
if_mtu denotes L3 interface MTU, e.g. maximum trasmitted _packet_ size.
However, IPv6 mtu might be different from if_mtu one (e.g. default 1280)
for some cases, so we need an abstract way to know maximum MTU size
for given interface and domain.
* moves rt_setmetrics() before MTU/ifa_rtrequest hooks since it copies
user-supplied data which must be checked.
* removes RT_LOCK_ASSERT() from other ifa_rtrequest hooks to be able to
use this functions on new non-inserted rte.
More changes will follow soon.
MFC after: 1 month
Sponsored by: Yandex LLC
We have observed that arc_release() can be called concurrently with a
l2arc in-flight write.
Also, we have observed that arc_hdr_destroy() can be called from
arc_write_done() for a zio with ZIO_FLAG_IO_REWRITE flag in similar
circumstances.
Previously the l2arc headers would be freed while leaking their
associated compression buffers. Now the buffers are placed on
l2arc_free_on_write list for delayed freeing. This is similar to what
was already done to arc buffers that were supposed to be freed
concurrently with in-flight writes of those buffers.
In addition to fixing the discovered leaks this change also adds some
protective code to assert that a compression buffer associated with a
l2arc header is never leaked.
A new kstat l2_cdata_free_on_write is added. It keeps a count of
delayed compression buffer frees which previously would have been leaks.
Tested by: Vitalij Satanivskij <satan@ukr.net> et al
Requested by: many
MFC after: 2 weeks
Sponsored by: HybridCluster / ClusterHQ
It returns only current working directory of given process which saves a lot of
overhead over kern.proc.filedesc if given proc has a lot of open fds.
Submitted by: Tiwei Bie <btw mail.ustc.edu.cn> (slightly modified)
X-Additional: JuniorJobs project
