The routine is only called on mmap and exec, both of which are invalid for
this type.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23421
This mostly eliminates the requirement that vput never unlocks the vnode
before calling VOP_INACTIVE. Note it may still be present for other
filesystems.
See r356126 for an example bug.
Note vput stopped doing early unlock in r357070 thus this change does
not affect correctness as it is.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23215
vget is almost always called with LK_SHARED, meaning the flag (if present) is
almost guaranteed to get cleared. Stop handling it in the first place and
instead let the thread which wanted to do inactive handle the bumepd usecount.
Reviewed by: jeff
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D23184
Only send a speedup when there's a shortage. While this is a little racy, lost
races aren't a big deal for this function. If there's a shorage just popping up
after we check these values, then we'll catch it next time. If there's a
shortage that's just clearing up, we may do some work at the lower layers a
little sooner than we otherwise would have. Sicne shortages are relatively rare
events, both races are acceptable.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23182
It turns out there's a problem with using g_io to send the speedup. It leads to
a race when there's a resource shortage when a disk fails.
Instead, send BIO_SPEEDUP via struct buf. This is pretty straight forward,
except we need to transfer the bio_flags from b_ioflags for BIO_SPEEDUP commands
in g_vfs_strategy.
Reviewed by: kirk, chs
Differential Revision: https://reviews.freebsd.org/D23117
twice. Once to update the changed inodes, and a second time to update
changed quota information. This change merges these two scans into a
single scan which does both inode and quota updates.
MFC after: 7 days
needs to handle file removal, directory removal, file move, directory move,
etc. The code in handle_workitem_remove() needs to propagate any completed
journal entries to the write that will render the change stable. In the
case of a moved directory this means the new parent. However, for an
overwrite that frees a directory (DIRCHG) we must move the jsegdep to the
removed inode to be released when it is stable in the cg bitmap or the
unlinked inode list. This case was previously unhandled and caused a
panic.
Reported by: mckusick, pho
Reviewed by: mckusick
Tested by: pho
Part of i_flag can persist across a drop to hold count of 0, at which
point the vnode is taken off the lazy list. Then whoever locks and unlocks
the vnode can trip on the assert.
This trips over kyua running a test untarring character devices to ufs.
Reported by: lwhsu
The current notion of an active vnode is eliminated.
Vnodes transition between 0<->1 hold counts all the time and the
associated traversal between different lists induces significant
scalability problems in certain workloads.
Introduce a global list containing all allocated vnodes. They get
unlinked only when UMA reclaims memory and are only requeued when
hold count reaches 0.
Sample result from an incremental make -s -j 104 bzImage on tmpfs:
stock: 118.55s user 3649.73s system 7479% cpu 50.382 total
patched: 122.38s user 1780.45s system 6242% cpu 30.480 total
Reviewed by: jeff
Tested by: pho (in a larger patch, previous version)
Differential Revision: https://reviews.freebsd.org/D22997
Quota code is temporarily regressed to do a full vnode scan.
Reviewed by: jeff
Tested by: pho (in a larger patch, previous version)
Differential Revision: https://reviews.freebsd.org/D22996
This will be used later to add vnodes to the lazy list.
Reviewed by: kib (previous version), jeff
Tested by: pho (in a larger patch)
Differential Revision: https://reviews.freebsd.org/D22994
or rename an entry in it, properly reset the link count of the inode
associated with the entry that was to have been changed.
Tested by: Peter Holm
MFC after: 7 days
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
After a recent change, vput() relocks even the exclusively locked
vnode before inactivating it. Before that, UFS could safely
instantiate a vnode for cleared inode, then the last vput() after
ffs_vgetf() noted that ip->i_mode == 0 and recycled. Now, it is
possible for other threads to note the half-constructed vnode, e.g. to
insert it into hash, which makes other threads to use it despite mode
is zero, before inactivation and reclaim.
Handle the found cases in SU code, by explicitly doing reclaim.
Assert that other places get fully constructed inode from ffs_vgetf(),
which cannot be cleared before dependencies are resolved.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
g_io_speedup waits for the completion of the speedup request before proceeding
using biowait(), but check_clear_deps is called with the softdeps lock held
(which is non-sleepable). It's safe to drop this lock around the call to
speedup, so do that.
Submitted by: Peter Holm
Reviewed by: kib@
When we have a resource shortage in UFS, send down a BIO_SPEEDUP to
give the CAM I/O scheduler a heads up that we have a resource shortage
and that it should bias its decisions knowing that.
Reviewed by: kirk, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18351
The checks literally repeat conditions that make ufs_inactive() to
take some actions.
Reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22616
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
the vnode, logical block number, and size of data block that is
being requested. They then use the VOP_BMAP function to calculate
the mapping from logical block number to physical block number from
which to access the data. This change expands the interface to also
pass the physical block number in cases where the VOP_MAP function
may no longer work, for example when a file is being truncated.
No functional change.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
because nothing ever changes this field for read-only mounts and we want
to verify that it is still 0 when we unmount.
Reviewed by: mckusick
Approved by: mckusick (mentor)
Sponsored by: Netflix
the cg rather than reusuing "ino" for this purpose. This reduces the diff
for an upcoming change that improves handling of I/O errors.
No functional change.
Reviewed by: mckusick
Approved by: mckusick (mentor)
Sponsored by: Netflix
flag and use the same system.
This enables further fault locking improvements by allowing more faults to
proceed with a shared lock.
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22116
stat() of one of the remaining names of the file does not show an
updated ctime (inode modification time) until several seconds after
the unlink() completes. The problem only occurs when the filesystem
is running with soft updates enabled. When running with soft updates,
the ctime is not updated until the soft updates background process
has settled all the needed I/O operations.
This commit causes the ctime to be updated immediately during the
unlink(). A side effect of this change is that the ctime is updated
again when soft updates has finished its processing because that
is the time that is correct from the perspective of programs that
look at the disk (like dump). This change does not cause any extra
I/O to be done, it just ensures that stat() updates the ctime before
handing it back.
PR: 241373
Reported by: Alan Somers
Tested by: Alan Somers
MFC after: 3 days
Sponsored by: Netflix
have been unlinked, but are still referenced by open file descriptors.
These inodes cannot be freed until the final file descriptor reference
has been closed. If the system crashes while they are still being
referenced, these inodes and their referenced blocks need to be
freed by fsck. By having them on a linked list with the head pointer
in the superblock, fsck can quickly find and process them rather
than having to check every inode in the filesystem to see if it is
unreferenced.
When updating the head pointer of this list of unlinked inodes in
the superblock, the superblock check-hash was not getting updated.
If the system crashed with the incorrect superblock check-hash, the
superblock would appear to be corrupted. This patch ensures that
the superblock check-hash is updated when updating the head pointer
of the unlinked inodes list.
There is no need to MFC as superblock check hashes first appeared in
13.0.
Tested by: Peter Holm
Sponsored by: Netflix
The softdep lock names were unusually long and tended to stick out in
lock profiling reports. Abbreviate them and make them consistent with
our conventional style for lock names.
Reviewed by: mckusick
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22042
There are 3 counters modified all the time in this structure - one for
keeping the structure alive, one for preventing unmount and one for
tracking active writers. Exact values of these counters are very rarely
needed, which makes them a prime candidate for conversion to a per-cpu
scheme, resulting in much better performance.
Sample benchmark performing fstatfs (modifying 2 out of 3 counters) on
a 104-way 2 socket Skylake system:
before: 852393 ops/s
after: 76682077 ops/s
Reviewed by: kib, jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21637
When softdep_fsync() is running, a caller must already started write
for the mount point. Since unmount or remount to ro suspends mount
point, it cannot run in parallel with softdep_fsync(), which makes
vfs_busy() call there not needed.
Doing blocking vfs_busy() there effectively causes lock order reversal
between vn_start_write() and setting MNTK_UNMOUNT, because
vfs_busy(mp, 0) sleeps waiting for MNTK_UNMOUNT becoming clear, while
unmount sets the flag and starts the suspension.
Note that all other uses of vfs_busy() in SU code are non-blocking.
Reported by: chs by mckusick
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Current implementation of vnode_create_vobject() and
vnode_destroy_vobject() is written so that it prepared to handle the
vm object destruction for live vnode. Practically, no filesystems use
this, except for some remnants that were present in UFS till today.
One of the consequences of that model is that each filesystem must
call vnode_destroy_vobject() in VOP_RECLAIM() or earlier, as result
all of them get rid of the v_object in reclaim.
Move the call to vnode_destroy_vobject() to vgonel() before
VOP_RECLAIM(). This makes v_object stable: either the object is NULL,
or it is valid vm object till the vnode reclamation. Remove code from
vnode_create_vobject() to handle races with the parallel destruction.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21412
In ffs_valloc(), force reclaim existing vnode on inode reuse, instead
of trying to re-initialize the same vnode for new purposes. This is
done in preparation of changes to the vp->v_object lifecycle handling.
A new FFSV_REPLACE flag to ffs_vgetf() directs the function to
vgone(9) the vnode if found in vfs hash, instead of returning it.
Reviewed by: markj, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21412
After all the changes, its dynamic scope is same as for MNTK_UNMOUNT,
but to allow the syncer vnode to be re-installed on unmount failure.
But the case of syncer was already handled by using the VV_FORCEINSMQ
flag for quite some time.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
hash was computed and the time that the superblock was copied to a
buffer to be written to disk. The result was a failed superblock
check hash the next time that the superblock was read.
The fix is to compute the check hash after the superblock has been
copied to a buffer to be written.
PR: 236504
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: Netflix
disk blocks, set the FORCE flag in the call to chkiq() or chkdq() since
the user is always allowed to return resources and hence there is no need
to check the user's credential .
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-1-UFS-1: Denial Of Service in mount (prison_priv_check)
Discussed with: kib
MFC: 1 week
Sponsored by: Netflix
r346932 replaced a call to vn_bmap_seekhole() with a call to
ufs_bmap_seekdata(). Although vn_bmap_seekhole() locks the vnode,
ufs_bmap_seekdata() assumes it is already locked.
This patch adds locking of the vnode before the ufs_bmap_seekdata() call.
If the vn_lock() call fails, it returns EBADF since that is the normal
error returned when a file system is forced dismounted and is already
listed as an error return in the lseek(2) man page.
Discussed with: markj
Reviewed by: kib
