the constraints on what needs to be installed in a specific to
maintain consistency during upgrades.
Create a new clibs package containing libraries that are needed
as a bare minimum for consistency.
With much help and input from: kib
Sponsored by: The FreeBSD Foundation
libedit is needed for sh(1), which if updated before runtime,
can cause undesirable behavior.
For the rest, the installation order needs to be:
1) librtld
2) libc
3) libthr
The dependency listing and shilbs_required entries ensure this
behavior.
Sponsored by: The FreeBSD Foundation
One of the major pain points with how this was implemented
is the requirement of in-tree, hard-coded <name>.ucl, as
well as <name>-<suffix>.ucl where <suffix> can be lib32,
profile, development, debug, or any combination of the four.
This created significant overhead when adding new packages
and any of the files in any of the combinations were missing.
Instead of test(1)-ing if the <packagename>.ucl file exists,
hand off to a script to figure out what the final ucl file
name should be before invoking pkg(8).
The default behavior is 'template.ucl' is used as a fallback.
This affects only the userland packages, as the kernel code
is already smart enough to handle these variations.
Sponsored by: The FreeBSD Foundation
with -DNO_ROOT to create the METALOG mtree(8) file.
Separate the default STAGEDIR for world (WSTAGEDIR) and kernel
(KSTAGEDIR).
Fix the 'create-kernel-packages' target to work properly.
Evaluate if 'kernel' is set when invoking mtree-to-plist.awk,
which splits the kernel and kernel.debug into separate plist
files.
Fix METALOG creation when building/packaging multiple kernels.
Sponsored by: The FreeBSD Foundation
Due to recent and upcoming changes to add additional functionality to
the EFI loader its now bigger than the space allocates for efiboot.img
so increase this in line with boot1.efifat.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
when re-using build chroot(8) environments.
This is based on the patch in the PR referenced below, but instead
of using 'reinstall' in two locations (one of which already uses
FORCE_PKG_REGISTER=1), changes the non-embedded behavior.
PR: 205998
Submitted by: ngie
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
indicates the 'release' target has run (in order to prevent
subsequent invocations that may clobber original build output).
As is, the 'release' target is a dummy target that does nothing
more than depend on subsequent targets. Unless 'make obj' is
invoked prior to 'make release', .OBJDIR and .CURDIR will always
be '/usr/src/release' (or wherever /usr/src is located).
When 'make release' invokes 'make real-release' (and subsequent
targets), .OBJDIR is not updated, which still leads to src/ tree
pollution.
While arguably a hack, 'make release' will invoke the original
dummy targets as originally intended, but instead of touching an
empty file (or returing @true), will call a 'release-done' target
that will trigger the behavior that was intended to prevent
a subsequent invocation.
Discussed with: hrs
MFC after: 3 days
X-MFC-With: r293173
Sponsored by: The FreeBSD Foundation
- Rework MANIFEST generation and parsing via bsdinstall(8).
- Allow selecting debugging distribution sets during install.
- Rework bsdinstall(8) to fetch remote debug distribution sets
when they are not available on the local install medium.
- Allow selecting additional non-GENERIC kernels during install.
At present, GENERIC is still required, and installed by default.
Tested with: head@r293203
Sponsored by: The FreeBSD Foundation
the root filesystem read-write. This causes problems booting
the memstick installation medium from write-protected USB flash
drives.
Submitted by: A.J. Kehoe IV [1], Oliver Jones [2]
PR: 187161 [1], 205886 [2]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
A stray trailing space snuck in with one of the recent
changes, making r290550 and r290573 effectively no-op.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
be overridden and ends up overwriting output files.
- For the descriptions that just say "TODO", switch to using %DESC% so
the generic description is used.
Approved by: bapt
This was discussed during the 10.2-RELEASE cycle, however
since we were nearing the end of the cycle, we decided to
defer this change until after 10.2-RELEASE.
Reminded by: so (delphij), jmg
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
MS-DOS partition. This will help with transitioning to
a single arm/armv6 userland build which could be used for
all FreeBSD/armv6 images without UBLDR_LOADADDR being set
for each board (ultimately requiring a separate buildworld
for each currently).
Requested by: ian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
set to empty values, which would result in nonintuitive build
errors.
MFC after: 3 days
X-MFC-With: r288341
PR: 203420 (related to)
Sponsored by: The FreeBSD Foundation
extra bits from an "xtra-bits-dir". This feature is unusable
from release/Makefile. Add an XTRADIR setting to use it.
Differential Revision: https://reviews.freebsd.org/D3633
Reviewed by: kmacy
MFC after: 3 weeks
X-MFC-to: stable/10
Relnotes: yes
builds, and prepend it to SNAPSHOT_DATE to prevent a trailing '-'
in the final box name for a release build.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
issues on some EC2 instance types. Users may want to experiment with
removing this from loader.conf and measuring the performance impact on
the EC2 instances they are using.
- pkg(8) cannot be removed before subsequent reinvocations
- The PKG_CACHEDIR cannot be cleaned after the repo*.sqlite
has been removed
- pkg(8) cannot be removed as a precursor to any of the other
steps involved here
MFC after: 3 days
X-MFC-With: r285722
X-MFC-Before: 10.2-{BETA3,RC1} (whichever happens next)
Sponsored by: The FreeBSD Foundation
The true cause of the missing UFS/MSDOSFS labels has been
identified, and only affects stable/10 at the moment.
An request for commit to stable/10 will be pending RE approval
after this commit.
MFC after: 1 day
X-MFC-Note: never
X-MFC-Never: r285018, r285019, r285076, r285078, r285082
Sponsored by: The FreeBSD Foundation
the symlink from loader.rc.sample.
Fix paths relative to the CHROOTDIR.
MFC after: 3 days
X-MFC-With: r285076, r285078
X-MFC-Before: 10.2-BETA1
Sponsored by: The FreeBSD Foundation
UFS/MSDOSFS label issues on FreeBSD/arm builds, however
the real problem was addressed in r285076, which is due
to two separate issues, unrelated to md(4) stale device
existence.
MFC after: 3 days
X-MFC-With: r285076
X-MFC-Before: 10.2-BETA1
Sponsored by: The FreeBSD Foundation
FreeBSD/arm builds. The problem stems from the loader.rc file
not existing, as well as geom_label not being loaded at boot.
For now, add the geom_label_load entry to loader.conf, and
symlink loader.rc.sample to loader.rc, both of which allowed
my BeagleBone Black to boot fine with a UFS label reference in
fstab(5).
MFC after: 3 days
X-MFC-Before: 10.2-BETA1
Sponsored by: The FreeBSD Foundation
cannot possibly exist within the chroot(8) before the target
filesystem actually exists.
MFC after: 3 days
X-MFC-With: r285018
Sponsored by: The FreeBSD Foundation
written to disk with newfs(8) and newfs_msdosfs(8).
When iterating through snapshot builds in serial, it is possible for
a build failure to leave stale md(4) devices behind, in some cases, they
could have a UFS or MSDOS filesystem label assigned.
If the md(4) is not destroyed (or not able to be destroyed, as has
happened recently due to my own fault), the filesystem label that
already exists can interfere with a new md(4) device that is targeted to
have the same label.
This behavior, although admittedly a logic error in the wrapper build
scripts, has caused intermittent reports (in particular with the armv6
builds) of missing UFS/MSDOSFS labels, causing the image to fallback to
the mountroot prompt. This appears to only happen when the backing
md(4) device is destroyed before the calling umount(8) on the target
mount, after which the UFS/MSDOSFS label persists.
The workaround is this: If EVERYTHINGISFINE is set to non-empty value,
check for an existing ufs/rootfs and msdosfs/MSDOSBOOT filesystem label
in arm_create_disk(), and rm(1) them if they exist.
The EVERYTHINGISFINE variable is chosen because it is used in exactly
one other place - release/Makefile.mirrors - and there are big scary
warnings at the top of that file as well that it should *not* be used
under normal circumstances. This should not destroy a build machine
that also uses '/dev/ufs/rootfs' as the UFS label, and I have verified
in extensive local testing that the destroyed label is recreated when
the md(4) is unmounted/mounted, but this really should not be enabled
by anyone.
Having said all that, I absolutely *do* plan MFC this to stable/10 for
the 10.2-RELEASE cycle, as so far, I have only observed this behavior
on stable/10, but this is a temporary solution until I can unravel all
of the failure paths to properly trap them.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
It was useful when working out several kinks when
testing automated image uploading when retrying was
necessary, but now it is making things much too messy.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
not set, which expands to '11.0-CURRENT', for example.
If the branch is -CURRENT, -STABLE, or -PRERELEASE, suffix
the VAGRANT_VERSION with the snapshot date.
MFC after: 3 days
X-MFC-Needs: r284893, r284895, r284896, r284897, r284942
Tested with: head@r284961 (patched)
Sponsored by: The FreeBSD Foundation
VAGRANT_PROVIDERS variable. Right now, it defaults to only
vmware_desktop, virtualbox support is to follow at some point.
While here, fix the hashicorp URL: s/vagrant/atlas/, which
was result of a sed(1) replace (and my fault).
Sponsored by: The FreeBSD Foundation
VAGRANT_${VAR} variables extracted from VAGRANT_UPLOAD_CONF.
Set ATLAS_${VAR} to VAGRANT_${VAR} if VAGRANT_UPLOAD_CONF
is set. There is intent to intentionally have separate
variants of configuration entries, but the defaults do not
yet have any reason to be different.
Sponsored by: The FreeBSD Foundation
machine images to the Google Compute Engine platform.
By default, gcutil/gsutil requires an Oauth2 login generated
from a URL that must be opened in a browser, a verification
code copied back to the terminal from which it was invoked,
etc., etc., making it near impossible for automation.
I've hacked together an evil solution to work around this,
so unless GCE_LOGIN_SKIP is set to a non-empty value, this
Makefile will not do anything useful.
As a result of this commit, remove the gce-package.sh script
that was never, nor will ever be, used.
MFC after: 3 days
X-MFC-Note: (hopefully)
Sponsored by: The FreeBSD Foundation
AMIs and Azure VM images. This is particularly helpful for
testing to avoid name collisions, but also useful for cases
where a necessary rebuild is done before the date changes.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Remove the Azure-local vm_extra_create_disk(), since we no longer
need qemu-img to convert the final VHD image to an Azure-compatible
format.
Although the waagent utility is installed from ports, create the
symlink to /usr/sbin, pending investigation on where this is
hard-coded, so it can be reported upstream. In the meantime, this
is good enough.
MFC after: 3 days
X-MFC-Needs: r284269, r284270, r284271, r284655,
r284656, r284657, r284658, r284659
X-MFC-Note: Required for 10.2-RELEASE, marcel@ has
implicit approval for the required changes
Sponsored by: The FreeBSD Foundation
