- Rework MANIFEST generation and parsing via bsdinstall(8).
- Allow selecting debugging distribution sets during install.
- Rework bsdinstall(8) to fetch remote debug distribution sets
when they are not available on the local install medium.
- Allow selecting additional non-GENERIC kernels during install.
At present, GENERIC is still required, and installed by default.
Tested with: head@r293203
Sponsored by: The FreeBSD Foundation
the root filesystem read-write. This causes problems booting
the memstick installation medium from write-protected USB flash
drives.
Submitted by: A.J. Kehoe IV [1], Oliver Jones [2]
PR: 187161 [1], 205886 [2]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
r273823-r273826, r273833, r273836, r273944, r274069-r274071,
r274134, r274211, r274280-r274285, r274287-r274288, r274292,
r274296-r274297, r274356, r274533, r274725, r274726, r274729,
r274734, r274771, r274945-r274946, r277180, r277183-r277184,
r277186-r277187, r277250-r277253, r277263-r277264, r277383-r277384,
r277393-r277395, r277438-r277439, r277447, r277455:
r273823:
Move virtual machine / cloud provider targets and
options from release/Makefile to their own Makefile.
r273824:
Add glue to allow enabling building cloud provider VM images
by default.
When WITH_CLOUDWARE is not empty, add CLOUDTARGETS to the
release/Makefile 'release' target.
r273825:
Avoid hard-coding the Azure image file format. While here,
avoid using OSRELEASE for the output file name.
r273826:
Remove a few vestiges of passing an exit code to panic().
r273833:
Initial commit providing a mechanism to create openstack images
as part of the release build.
r273836:
Fix output file name for openstack images. No further conversion
is necessary for this VM file target, so there is no need to append
the '.raw' suffix here.
r273944:
Uncomment the cloudinit rc.conf(5) line.
r274069:
Add line continuation so OPENSTACKCONF is actually included in the env(1).
r274070:
Add a 'vm-cloudware' target, used to drive all targets in CLOUDTARGETS.
r274071:
Add examples for WITH_CLOUDWARE to release.conf.sample.
Add WITH_CLOUDWARE evaluation to RELEASE_RMAKEFLAGS.
r274134:
Initial rewrite to consolidate VM image build scripts into one.
r274211:
Add write_partition_layout() used to populate the final image.
Fix duplicated mkimg(1) call in vm_create_disk().
Add primitive (untested) PowerPC/PowerPC64 VM image support.
Note: As it is currently written, the /boot/pmbr and
/boot/{gptboot,boot1.hfs} use the build host and not the target
build. Fixing this is likely going to be a hack in itself.
r274280:
Return if vm_create_disk() is unsuccessful.
r274281:
Add CLEANFILES entry for VM targets
r274282:
Add vm_extra_pre_umount() prototype to vmimage.subr.
r274283:
Fix DESTDIR for installworld, and make sure it is created before use.
r274284:
Move usage() from vmimage.subr to mk-vmimage.sh, in case vmimage.subr
has not been sourced.
r274285:
Spell 'OPTARG' correctly. Actually call vm_create_base().
r274287:
Fix line continuation in write_partition_layout().
Remove variable test that is no longer needed.
r274288:
Fix scheme flag to mkimg(1).
r274292:
mount(8) and umount(8) devfs(5) as needed.
r274296:
Change path for mk-vmimage.sh from ${TARGET}/ to scripts/ now that
it is consolidated into one file.
Fix paths for the base image and output disk image files.
r274297:
Call cleanup() after everything is done.
r274356:
Remove a stray directory from CLEANFILES.
r274533:
Set the boot partition type to 'apple-boot' for powerpc.
r274725:
In vm_install_base(), copy the host resolv.conf into
the build chroot before attempting to do anything that
requires working DNS (i.e., pkg bootstrap).
In vm_extra_pre_umount(), remove the resolv.conf before
the disk image is unmounted from the backing md(4).
r274726 (cperciva):
Silence errors when umounting the chroot's /dev, since it
probably doesn't exist when we're running this.
Unmount filesystems before attempting to destroy the md which
holds them.
r274729 (cperciva):
Unmount filesystem and destroy md before we read the vnode from
disk and package it into a disk image. Otherwise we end up
packaging an unclean filesystem.
r274734 (cperciva):
Merge duplicative vm-CLOUDTYPE targets before additional duplication
gets added by the impending arrival of ec2 and gcloud.
r274771 (cperciva):
Add NOSWAP option which can be set by a vmimage.conf file to specify
that no swap space should be created in the image. This will be used
by EC2 builds, since FreeBSD/EC2 allocates swap space on "ephemeral"
disks which are physically attached to the Xen host node.
r274945:
In vm_extra_install_packages(), only bootstrap pkg(8) if
VM_EXTRA_PACKAGES is empty.
In vm_extra_pre_umount(), cleanup downloaded packages if pkg(8) was
bootstrapped earlier.
r274946:
Fix indentation nit.
r277180:
In vm_extra_install_base(), do not install waagent in the openstack
image, because it is not used. This appears to be a copy mistake.
Remove vm_extra_install_base() from the openstack.conf entirely,
since it does not need to be overridden.
r277183:
Enable the textmode console by default for VM images, since there is
no way to tell if the environment will be able to use the
graphics-mode console.
r277184:
Enable password-less sudo for openstack images.
r277186:
Update the VM_EXTRA_PACKAGES list for the openstack images.
The documentation suggests doing a "just fetch this and run it"-style
bootstrap, from which the list of dependencies was obtained (in
github, at: pellaeon/bsd-cloudinit-installer)
There is one Python dependency unmet, oslo.config, which is not in
the Ports Collection.
r277187:
Add a comment to note that setting hw.vga.textmode=1 is temporary.
r277250:
Remove vm_extra_install_base() for the Azure image, now that the
waagent exists in the ports tree.
Add sysutils/azure-agent to the VM_EXTRA_PACKAGES list.
In vm_extra_pre_umount(), remove the explicit pkg(8) install
list, as dependencies are resolved by sysutils/azure-agent.
r277251:
Add a 'list-cloudware' target to print the list of supported CLOUDWARE
values and a description.
Add the AZURE_DESC and OPENSTACK_DESC descriptions.
r277252:
Update release(7)
r277253:
Add 'list-vmtargets' target, which produces a list of all supported
VM and cloud provider images.
Add VHD_DESC, VMDK_DESC, QCOW2_DESC, RAW_DESC image descriptions.
Format the output to make a bit more readable.
Update release(7) to document the list-vmtargets target.
r277263:
Add initial support for the GCE (Google Compute Engine) cloud hosting
provider image.
r277264:
Style and line length cleanup.
r277383:
Remove the console setting from rc.conf(5), which is not used there.
While here, set console to include vidconsole in the loader.conf(5).
r277384:
Fix an indentation nit.
No functional changes.
r277393:
Remove the pkg-clean(8) call from vm_extra_pre_umount() since the
function is often overridden.
Add vm_extra_pkg_rmcache() to call pkg-clean(8) to avoid duplicated
code.
r277394:
Move resolv.conf(5) removal back to vm_extra_pre_umount() where it
belongs.
The GCE image needs resolv.conf(5) to exist (created as part of the
image setup), so it cannot be removed.
r277395:
Comment the line that configures ttys(5) to 'off', which makes it
impossible to test that the image boots.
Add a note explaining why the line is commented, and not (yet) removed
entirely.
r277438:
Move the 'install' bits that are specific to virtual machine images
from the Makefile to Makefile.vm.
Rename the 'install' target to 'release-install', and add a new
'vm-install' target.
Add a new 'install' target that invokes the new targets.
r277439:
Add WITH_CLOUDWARE to the list of make(1) variables for the release
build.
r277447:
Remove hw.vga.textmode=1 from the VM image loader.conf, which was
included during test builds and not intended to be included when
merging this project branch back to head.
r277455:
Remove mk-azure.sh, which is no longer needed.
MFC after: 1 month
X-MFC-To: stable/10 (requires mkimg(1))
Help from: cperciva, swills
Relnotes: yes
Sponsored by: The FreeBSD Foundation
There may be some very sharp edges here while refactoring.
- Move amd64/mk-vmimage.sh -> scripts/mk-vmimage.sh.
- Remove vm-base target from Makefile.vm.
- In vm-image target, use getopts flags for argument passing.
- Create tools/vmimage.subr, containing default and prototype
for the following functions that are used to drive the build,
run in this order:
vm_install_base()
vm_extra_install_base()
vm_extra_install_packages()
vm_extra_install_ports()
vm_extra_enable_services()
vm_extra_pre_umount()
vm_create_disk()
vm_extra_create_disk()
- In tools/azure.conf, override:
vm_extra_install_base()
vm_extra_pre_umount()
vm_extra_create_disk()
- In tools/openstack.conf, override:
vm_extra_install_base()
vm_extra_pre_umount()
Sponsored by: The FreeBSD Foundation
openstack images as part of the release build.
This mimics the way Microsoft Azure images are
built, with the addition of installing the
net/cloud-init package and adding a (commented)
rc.conf(5) entry for cloudinit.
Sponsored by: The FreeBSD Foundation
r273076, r273077, r273079, r273095:
r273076:
Add a separate make(1) target to release/Makefile to
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
r273077:
Clear VM_RC_LIST.
r273079:
Fix signal list to trigger umount(8).
r273095:
Output an informational message when mkimg(1) runs, so it
does not appear that the process has stopped while waiting
for a 'y/n' response when waagent is deprovisioned.
Tested on: releng/10.1@r272876
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
r272436, r272437, r272792:
r272436:
Remove the first argument to panic(), which was initially
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
r272437:
If the vm-base target fails, prevent the vm-image target
from being run since it cannot possibly succeed.
r272792:
Add /usr/local/bin and /usr/local/sbin to PATH, needed
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
Sponsored by: The FreeBSD Foundation
Remove implementation of vm_prebuild_setup(),
vm_setup(), and vm_postbuild_setup().
It does not scale well, and I am not happy with
their implementation.
Sponsored by: The FreeBSD Foundation
- vm_prebuild_setup():
Steps to run prior to creating the file-backed
disk image.
- vm_setup():
Steps to run while the file-backed disk image
is mounted.
- vm_postbuild_setup():
Steps to run after the file-backed disk image
is dismounted.
The intention is to override as necessary via build
configuration files, as needed.
Sponsored by: The FreeBSD Foundation
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
Sponsored by: The FreeBSD Foundation
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
Sponsored by: The FreeBSD Foundation
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
MFC after: 5 days
X-MFC-10.1: yes
Tested on: r272269, r272272, r272279, r272380, r272392
Sponsored by: The FreeBSD Foundation
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
Sponsored by: The FreeBSD Foundation
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
Sponsored by: The FreeBSD Foundation
and working on QEMU. Actually using this script as the regular image
generator, like with the memstick one, will require that the kernel support
EFI too. In particular, the following two things are required:
1. vt(9) be the default console driver
2. vt_efifb and vt_vga be able to coexist usefully in the same kernel
One other note here is that this requires newfs_msdos and mdconfig, which is
really ugly. NetBSD's makefs at least seems to support FAT now. If that
actually works, it should be imported and we can get rid of the mdconfig mess.
mini-memstick.img with UEFI support.
As the comments in the file suggest, 1) there must
be existing ${.OBJDIR}/usr/src/release/{release,bootonly};
2) TARGET/TARGET_ARCH must be amd64; and 3) it must be
a vt(4)-enabled kernel with vt_efifb (*not* vt_vga).
This script is not hooked into release/Makefile in any way
until further testing is complete.
Sponsored by: The FreeBSD Foundation
Restore make-memstick.sh back to its original state to
unbreak booting for machines that do not support GPT.
I have in-progress work to keep the MBR layout and add
the EFI partition, but it is not yet ready, and does
need at least one full release build to be certain it
does not break.
Sponsored by: The FreeBSD Foundation
- Indent 1 full tab where needed
- Use $() for shell exec
- Insert a space between '$(( ))' parens
MFC After: 1 week
X-MFC-With: r264907
Sponsored by: The FreeBSD Foundation
dedicated' partition scheme, reported to cause the memstick.img
to fail to boot.
Similar to how make-memstick.sh worked on stable/8, use makefs(8)
to create the actual filesystem. Then calculate the size of the
resulting image file, create the GPT partition scheme, then dd(1)
the filesystem created with makefs(8) to the freebsd-ufs GPT
partition.
This was tested on a known-working machine[1] for regression, and
a known-not-working machine[2] to ensure the boot issue has been
resolved.
Testers: myself [1], db [2]
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
- Add a release-dvd.conf pkg(8) configuration file to override
the default FreeBSD.conf configuration.
- Remove architecture-specific pkg-stage.conf files, consolidate,
and move their contents to scripts/pkg-stage.sh.
- Use 'pkg -vv' to determine the ABI, which is used as the
cache directory.
Prior to these changes, it would be possible for pkg-stage to fetch
conflicting binary packages from multiple repositories.
Tested against: head@r260522, stable/10@r260522
MFC after: 3 days
X-Insta-MFC: possibly
Sponsored by: The FreeBSD Foundation
from pkg.FreeBSD.org for inclusion on release medium (dvd1.iso).
The script sources ${.CURDIR}/${TARGET}/pkg-stage.conf, which sets
several environment variables, such as the pkg(8) ABI, PACKAGESITE,
PKG_DBDIR, and PKG_CACHEDIR. PKG_CACHEDIR is set to the directory
on the release medium used by bsdconfig(8) (/packages/${ABI}). ABI
is determined by output of 'make -C /usr/src/release -V REVISION'.
See pkg.conf(5) for descripton on other variables set here.
The list of packages to include are set within the configuration
file.
The script and configuration files are intended to be run by the
'make dvd' target within the release directory, and assume the
release is built within a chroot environment (such as by using
release.sh).
Relevant updates to release/Makefile will follow.
Sponsored by: The FreeBSD Foundation
- Use ln -fs to create a symlink.
- Remove pkgadd for docports.
- Use WITHOUT_JADETEX=yes instead of WITH_JADETEX=no.
- Add {WORLD,KERNEL}_FLAGS to [BTWK]MAKE.
- Use makefs(8) and gpart(8) for sparc64 ISO image[2].
- Add publisher option to makefs(8)[2].
Based on work by: gjb[1]
Discussed with: marius, nwhitehorn[2]
Volume Descriptor (section 7.4). In short, upper-case alphanumeric + some
symbols only. While the makefs utility automatically converts the characters,
$LABEL should be consistent in the scripts.
digit beyond your time.
Various sysinstall dependencies (e.g. libftpio, libdisk, libodialog, etc.)
will be cleaned up in coming days. Some will take longer than others due to
a few other consumers (tzsetup and sade).
changes, and backport the new logic (ISO images are TARGET dependant, not
TARGET_CPUARCH dependant) to Makefile.sysinstall. While modifying ISO
image scripts, change several archs to use makefs (from base) instead of
mkisofs (from ports) which makes release CD generation both faster and
self-hosting.
makes booting more reliable (and working at all on USB sticks). While here,
move responsibility for setting up fstab into the various platform mk-*.sh
scripts.
Suggested by: many
i386 and amd64. This involved moving the memstick generation script to
the arch directories from scripts/, in analogy to mkisoimages.sh. This
script was never called from /usr/src/release/Makefile, so that hasn't
been updated.
