Commit Graph

4990 Commits

Author SHA1 Message Date
John Birrell
3a877a1d93 Add CTF conversion to the objects compiled from generated code.
This allows DTrace scripts to access variables like 'ostype'.
2008-07-05 06:12:14 +00:00
John Baldwin
a78c3ed89c Remove the sbsh(4) driver. No one responded to requests for testing the
MPSAFE patches on current@ and stable@.  This driver also has a fundamental
issue in that it sleeps when sending commands to the card including in the
if_init/if_start routines (which can be called from interrupt context).  As
such, the driver shouldn't be working reliably even on 4.x.
2008-07-04 21:24:35 +00:00
John Baldwin
e9a31041c0 Remove the sbni(4) driver. No one responded to calls to test it on
current@ and stable@.
2008-07-04 21:06:57 +00:00
John Baldwin
67c58e8a6e Remove the cnw(4) driver. No one responded to calls to test it on current@
and stable@.  It also is a driver for an older non-802.11 wireless PC card
that is quite slow in comparison to say, wi(4).  I know Warner wants this
driver axed as well.
2008-07-04 19:13:15 +00:00
John Baldwin
2c6298572e Remove the oltr(4) driver. No one responded to calls for testing on
current@ and stable@ for the locking patches.  The driver can always be
revived if someone tests it.

This driver also sleeps in its if_init routine, so it likely doesn't really
work at all anyway in modern releases.
2008-07-04 18:58:53 +00:00
John Baldwin
94f923b69d Remove the arl(4) driver. It is reported to not work on 6.x or later
even though the driver hasn't changed since 4.x (last known working
release).
2008-07-04 18:15:36 +00:00
Philip Paeps
01895a25f3 Remove stray "miibus0" reference from ancient kernel config file times.
MFC after:	1 day
2008-06-28 13:38:53 +00:00
Doug Rabson
c675522fc4 Re-implement the client side of rpc.lockd in the kernel. This implementation
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3) library. It also implements
recovery from server restarts and ensures that dirty cache blocks are written
to the server before obtaining locks (allowing multiple clients to use file
locking to safely share data).

Sponsored by:	Isilon Systems
PR:		94256
MFC after:	2 weeks
2008-06-26 10:21:54 +00:00
Ruslan Ermilov
042df2e2da Enable GCC stack protection (aka Propolice) for userland:
- It is opt-out for now so as to give it maximum testing, but it may be
  turned opt-in for stable branches depending on the consensus.  You
  can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
  It is harmless to steal the knob as SSP symbols have been provided
  by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
  (sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
  libc will be automatically downgraded to -fstack-protector because it
  breaks rtld otherwise.
- This option is unavailable on ia64.

Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.

Submitted by:	Jeremie Le Hen <jeremie@le-hen.org>
2008-06-25 21:33:28 +00:00
Xin LI
4d52a57549 Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit
Ethernet device driver, written by sephe@

Obtained from:	DragonFly
Sponsored by:	iXsystems
MFC after:	2 weeks
2008-06-20 19:28:33 +00:00
Robert Watson
a0faacaa38 When NETATALK is compiled into the kernel, at_rmx.c is required regardless
of whether NETATALKDEBUG is enabled, so make building it conditional on
NETATALK instead.  This problem appears to have been present from the time
that the netatalk implementation was imported.

PR:		124456
Submitted by:	Nathan Whitehorn <whitehorn at wisc dot edu>
MFC after:	3 days
2008-06-14 15:17:02 +00:00
Wojciech A. Koszek
53a609f064 Remove obselete PECOFF image activator support.
PRs assigned at the time of removal:    kern/80742

Discussed on:   freebsd-current (silence), IRC
Tested by:      make universe
Approved by:    cognet (mentor)
2008-06-14 12:51:44 +00:00
Jack F Vogel
667641261e Add LRO into kernel build 2008-06-11 22:10:10 +00:00
John Birrell
89020621fd Remove some sparc-specific stuff from my earlier sun4v work in p4.
It never belonged in current.

Pointed out by: marius
2008-06-09 06:31:17 +00:00
Doug Barton
e0976d1a55 The change to add subversion ID has two problems. The first is that when
newvers.sh is run pwd is actually the obj directory, so "../../.svn"
doesn't exist and the test always fails. The second is that buildkernel
is executed with a restrictive PATH, so unless you have svnversion in
/bin or /usr/bin it can't run.

Fix this by looking for svnversion in /bin, /usr/bin, and /usr/local/bin
in that order. If found, store the location and derive the value of the
source directory. Then run svnversion in the appropriate directory.

There is one possible refinement which would be to add a test for
LOCALBASE!=/usr/local if we don't find svnversion the first time, but
IMO that's not necessary at this time.
2008-06-08 19:46:23 +00:00
Marcel Moolenaar
d0767c77a9 Move bm(4) from the sys/conf/NOTES to sys/powerpc/conf/NOTES.
The driver applies to PowerPC only.
2008-06-08 01:58:11 +00:00
Marcel Moolenaar
cf99524aed Add support for the Apple Big Mac (BMAC) Ethernet controller,
found on various Apple G3 models.

Submitted by:	Nathan Whitehorn
2008-06-07 22:58:32 +00:00
Marcel Moolenaar
7d8ccad797 Add support for Apple's Descriptor-Based DMA (DBDMA) engine. The DMA
engine is usful to various  existing drivers, such as ata(4) and scc(4),
and is used bhy the soon to be added bm(4).

Submitted by:	Nathan Whitehorn
2008-06-07 21:56:48 +00:00
Poul-Henning Kamp
1125f273e5 If we can find it, include SVN version number in kernel version strings.
See also: http://www.bikeshed.org/
2008-06-07 09:49:57 +00:00
Benno Rice
9722a61504 Support for the XScale PXA255 SoC as found on the Gumstix Basix and Connex
boards.  This is enough to net-boot to multiuser.

Also supported is the SMSC LAN91C111 parts used on the netCF, netDUO and netMMC
add-on boards.

I'll be putting some instructions on how to boot this on the Gumstix boards
online soon.

This is still fairly rough and will be refined over time but I felt it was
better to get this out there where other people can help out.
2008-06-06 05:08:09 +00:00
Benno Rice
694c651803 This is a rewritten driver for the SMSC LAN91C111. It's based in part on the
sn(4) driver and also looking at newer drivers.  The reason for the rewrite is
to support MII and to try and resolve some performance issues found when trying
to use the sn(4) driver on the Gumstix network boards.

For reference, the SMSC LAN91C111 is a non-PCI ethernet part whose lineage
dates back to Ye Olde Days of ISA.  It seems to get some use in the embedded
space these days on parts lacking on-board MACs or on-board PCI controllers,
such as the XScale PXA line of ARM CPUs.

This also includes a driver for the SMSC LAN83C183 10/100 PHY.

Man page to follow.
2008-06-06 05:00:49 +00:00
Ed Schouten
09a80aba8e Rename tty_subr.c' to subr_clist.c'.
Because clists are also used outside the TTY layer, rename the file
containing the clist routines to something more accurate.

The mpsafetty TTY layer doesn't use clists. It uses its own buffers,
which also implement the unbuffered copying to userspace. We cannot
simply remove the clist routines then, because this would break various
drivers that are present within the kernel.

Approved by:	philip (mentor)
2008-05-27 06:41:50 +00:00
Pyun YongHyeon
75a1bf5f47 Hook up jme(4) to the build. 2008-05-27 01:54:45 +00:00
Pyun YongHyeon
5defec9f52 Connect jmphy(4) to the build. 2008-05-27 01:23:17 +00:00
Bjoern A. Zeeb
2e598474fa Remove ISDN4BSD (I4B) from HEAD as it is not MPSAFE and
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.

This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation

Discussed with: rwatson, re
2008-05-26 10:40:09 +00:00
Robert Watson
e4372ceba0 Remove netatm from HEAD as it is not MPSAFE and relies on the now removed
NET_NEEDS_GIANT.  netatm has been disconnected from the build for ten
months in HEAD/RELENG_7.  Specifics:

- netatm include files
- netatm command line management tools
- libatm
- ATM parts in rescue and sysinstall
- sample configuration files and documents
- kernel support as a module or in NOTES
- netgraph wrapper nodes for netatm
- ctags data for netatm.
- netatm-specific device drivers.

MFC after:	3 weeks
Reviewed by:	bz
Discussed with:	bms, bz, harti
2008-05-25 22:11:40 +00:00
John Birrell
597c90a27e Add the KDTRACE_HOOKS option for DTrace support. 2008-05-23 22:17:28 +00:00
John Birrell
ef74ab5a41 Add support for generating CTF data for the kernel. 2008-05-23 03:53:49 +00:00
John Birrell
91d0f31d5f Add a kernel option for amd64 to compile with the frame on the stack
so that the DTrace Function Bounadry Trace (fbt) provider can get
coverage of most functions in the kernel.
2008-05-23 03:52:55 +00:00
Maxim Konovalov
c7b3d8e28a o Document two new ALT_BREAK_TO_DEBUGGER key sequences. 2008-05-22 18:19:49 +00:00
Pyun YongHyeon
cfef026a03 Hook up age(4) to the build. 2008-05-19 01:53:47 +00:00
Pyun YongHyeon
5618f1be7b Connect atphy(4) to the build. 2008-05-19 01:18:02 +00:00
John Birrell
5ed1b46b36 Add a couple of files which depend of the KDTRACE_HOOKS option.
The syscall names are required by KDTRACE_HOOKS too.

And the unzip
2008-05-18 19:47:49 +00:00
John Birrell
c7d1b0ec0a Add two kernel options:
- KDTRACE_HOOKS for the shim layer of hooks which separate BSD licensed
                code from CDDL code.
- DDB_CTF       for the code that parses the CTF (compact C type format)
                data for use by the DTrace Function Boundary Trace
                provider and (possibly) ddb if we plan to do that.
2008-05-18 19:28:51 +00:00
Remko Lodder
6e535f6e5b Resort the if_ti driver to match the PCI Network cards instead of placing
it under the mii devices list.

PR:		kern/123147
Submitted by:	gavin
Approved by:	imp (mentor, implicit)
MFC after:	3 days
2008-05-17 23:50:00 +00:00
Jack F Vogel
9ca4041b6c This is driver version 1.4.4 of the Intel ixgbe driver.
-It has new hardware support
  -It uses a new method of TX cleanup called Head Write Back
  -It includes the provisional generic TCP LRO feature contributed
   by Myricom and made general purpose by me. This should move into
   the stack upon approval but for this driver drop its in here.
  -Also bug fixes and etc...

MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Benno Rice
eead3ae9fc Document BOOTP_BLOCKSIZE. 2008-05-16 06:50:40 +00:00
Benno Rice
aea75fde62 Allow the block size used when booting over NFS to be overridden. It defaults
to 8192 bytes which is the size currently used.
2008-05-16 06:27:03 +00:00
Andrey A. Chernov
64982acf50 Add -mno-sse3 for amd64 case too
PR:             123518
Submitted by:   Marc Olzheim <marcolz@stack.nl>
2008-05-10 20:46:07 +00:00
Julian Elischer
8b07e49a00 Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

  One thing where FreeBSD has been falling behind, and which by chance I
  have some time to work on is "policy based routing", which allows
  different
  packet streams to be routed by more than just the destination address.

  Constraints:
  ------------

  I want to make some form of this available in the 6.x tree
  (and by extension 7.x) , but FreeBSD in general needs it so I might as
  well do it in -current and back port the portions I need.

  One of the ways that this can be done is to have the ability to
  instantiate multiple kernel routing tables (which I will now
  refer to as "Forwarding Information Bases" or "FIBs" for political
  correctness reasons). Which FIB a particular packet uses to make
  the next hop decision can be decided by a number of mechanisms.
  The policies these mechanisms implement are the "Policies" referred
  to in "Policy based routing".

  One of the constraints I have if I try to back port this work to
  6.x is that it must be implemented as a EXTENSION to the existing
  ABIs in 6.x so that third party applications do not need to be
  recompiled in timespan of the branch.

  This first version will not have some of the bells and whistles that
  will come with later versions. It will, for example, be limited to 16
  tables in the first commit.
  Implementation method, Compatible version. (part 1)
  -------------------------------
  For this reason I have implemented a "sufficient subset" of a
  multiple routing table solution in Perforce, and back-ported it
  to 6.x. (also in Perforce though not  always caught up with what I
  have done in -current/P4). The subset allows a number of FIBs
  to be defined at compile time (8 is sufficient for my purposes in 6.x)
  and implements the changes needed to allow IPV4 to use them. I have not
  done the changes for ipv6 simply because I do not need it, and I do not
  have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

  Other protocol families are left untouched and should there be
  users with proprietary protocol families, they should continue to work
  and be oblivious to the existence of the extra FIBs.

  To understand how this is done, one must know that the current FIB
  code starts everything off with a single dimensional array of
  pointers to FIB head structures (One per protocol family), each of
  which in turn points to the trie of routes available to that family.

  The basic change in the ABI compatible version of the change is to
  extent that array to be a 2 dimensional array, so that
  instead of protocol family X looking at rt_tables[X] for the
  table it needs, it looks at rt_tables[Y][X] when for all
  protocol families except ipv4 Y is always 0.
  Code that is unaware of the change always just sees the first row
  of the table, which of course looks just like the one dimensional
  array that existed before.

  The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
  are all maintained, but refer only to the first row of the array,
  so that existing callers in proprietary protocols can continue to
  do the "right thing".
  Some new entry points are added, for the exclusive use of ipv4 code
  called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
  which have an extra argument which refers the code to the correct row.

  In addition, there are some new entry points (currently called
  rtalloc_fib() and friends) that check the Address family being
  looked up and call either rtalloc() (and friends) if the protocol
  is not IPv4 forcing the action to row 0 or to the appropriate row
  if it IS IPv4 (and that info is available). These are for calling
  from code that is not specific to any particular protocol. The way
  these are implemented would change in the non ABI preserving code
  to be added later.

  One feature of the first version of the code is that for ipv4,
  the interface routes show up automatically on all the FIBs, so
  that no matter what FIB you select you always have the basic
  direct attached hosts available to you. (rtinit() does this
  automatically).

  You CAN delete an interface route from one FIB should you want
  to but by default it's there. ARP information is also available
  in each FIB. It's assumed that the same machine would have the
  same MAC address, regardless of which FIB you are using to get
  to it.

  This brings us as to how the correct FIB is selected for an outgoing
  IPV4 packet.

  Firstly, all packets have a FIB associated with them. if nothing
  has been done to change it, it will be FIB 0. The FIB is changed
  in the following ways.

  Packets fall into one of a number of classes.

  1/ locally generated packets, coming from a socket/PCB.
     Such packets select a FIB from a number associated with the
     socket/PCB. This in turn is inherited from the process,
     but can be changed by a socket option. The process in turn
     inherits it on fork. I have written a utility call setfib
     that acts a bit like nice..

         setfib -3 ping target.example.com # will use fib 3 for ping.

     It is an obvious extension to make it a property of a jail
     but I have not done so. It can be achieved by combining the setfib and
     jail commands.

  2/ packets received on an interface for forwarding.
     By default these packets would use table 0,
     (or possibly a number settable in a sysctl(not yet)).
     but prior to routing the firewall can inspect them (see below).
     (possibly in the future you may be able to associate a FIB
     with packets received on an interface..  An ifconfig arg, but not yet.)

  3/ packets inspected by a packet classifier, which can arbitrarily
     associate a fib with it on a packet by packet basis.
     A fib assigned to a packet by a packet classifier
     (such as ipfw) would over-ride a fib associated by
     a more default source. (such as cases 1 or 2).

  4/ a tcp listen socket associated with a fib will generate
     accept sockets that are associated with that same fib.

  5/ Packets generated in response to some other packet (e.g. reset
     or icmp packets). These should use the FIB associated with the
     packet being reponded to.

  6/ Packets generated during encapsulation.
     gif, tun and other tunnel interfaces will encapsulate using the FIB
     that was in effect withthe proces that set up the tunnel.
     thus setfib 1 ifconfig gif0 [tunnel instructions]
     will set the fib for the tunnel to use to be fib 1.

  Routing messages would be associated with their
  process, and thus select one FIB or another.
  messages from the kernel would be associated with the fib they
  refer to and would only be received by a routing socket associated
  with that fib. (not yet implemented)

  In addition Netstat has been edited to be able to cope with the
  fact that the array is now 2 dimensional. (It looks in system
  memory using libkvm (!)). Old versions of netstat see only the first FIB.

  In addition two sysctls are added to give:
  a) the number of FIBs compiled in (active)
  b) the default FIB of the calling process.

  Early testing experience:
  -------------------------

  Basically our (IronPort's) appliance does this functionality already
  using ipfw fwd but that method has some drawbacks.

  For example,
  It can't fully simulate a routing table because it can't influence the
  socket's choice of local address when a connect() is done.

  Testing during the generating of these changes has been
  remarkably smooth so far. Multiple tables have co-existed
  with no notable side effects, and packets have been routes
  accordingly.

  ipfw has grown 2 new keywords:

  setfib N ip from anay to any
  count ip from any to any fib N

  In pf there seems to be a requirement to be able to give symbolic names to the
  fibs but I do not have that capacity. I am not sure if it is required.

  SCTP has interestingly enough built in support for this, called VRFs
  in Cisco parlance. it will be interesting to see how that handles it
  when it suddenly actually does something.

  Where to next:
  --------------------

  After committing the ABI compatible version and MFCing it, I'd
  like to proceed in a forward direction in -current. this will
  result in some roto-tilling in the routing code.

  Firstly: the current code's idea of having a separate tree per
  protocol family, all of the same format, and pointed to by the
  1 dimensional array is a bit silly. Especially when one considers that
  there is code that makes assumptions about every protocol having the
  same internal structures there. Some protocols don't WANT that
  sort of structure. (for example the whole idea of a netmask is foreign
  to appletalk). This needs to be made opaque to the external code.

  My suggested first change is to add routing method pointers to the
  'domain' structure, along with information pointing the data.
  instead of having an array of pointers to uniform structures,
  there would be an array pointing to the 'domain' structures
  for each protocol address domain (protocol family),
  and the methods this reached would be called. The methods would have
  an argument that gives FIB number, but the protocol would be free
  to ignore it.

  When the ABI can be changed it raises the possibilty of the
  addition of a fib entry into the "struct route". Currently,
  the structure contains the sockaddr of the desination, and the resulting
  fib entry. To make this work fully, one could add a fib number
  so that given an address and a fib, one can find the third element, the
  fib entry.

  Interaction with the ARP layer/ LL layer would need to be
  revisited as well. Qing Li has been working on this already.

  This work was sponsored by Ironport Systems/Cisco

Reviewed by:    several including rwatson, bz and mlair (parts each)
Obtained from:  Ironport systems/Cisco
2008-05-09 23:03:00 +00:00
Julian Elischer
4e77d2552e Fix spelling in comment. 2008-05-06 22:41:23 +00:00
John Baldwin
ee98c4a50e Add a new personality to mpt(4) devices to allow userland applications to
perform various operations on a controller.  Specifically, for each mpt(4)
device, create a character device in devfs which accepts ioctl requests for
reading and writing configuration pages and performing RAID actions.

MFC after:	1 week
Reviewed by:	scottl
2008-05-06 20:49:53 +00:00
Sam Leffler
6c26723b19 enable IEEE80211_DEBUG and IEEE80211_AMPDU_AGE by default 2008-05-03 17:05:38 +00:00
Marius Strobl
4755eb6411 Don't built the unused counter-timer abstraction.
MFC after:	3 days
2008-05-02 17:41:52 +00:00
Oleksandr Tymoshenko
3600563911 Make ld use tradmips for output formats since we migrated to it.
Approved by:	cognet (mentor)
2008-04-30 12:44:58 +00:00
Marcel Moolenaar
1c17588fda mp_machdep.c is only conditional upon smp, not aim. If booke grows
support for smp, mp_machdep.c needs to be included as well.
2008-04-30 00:50:50 +00:00
Sam Leffler
3971d07be7 Intel 4965 wireless driver (derived from openbsd driver of the same name) 2008-04-29 21:36:17 +00:00
Julian Elischer
6eeac1d921 Add an option (compiled out by default)
to profile outoing packets for a number of mbuf chain
related parameters
e.g. number of mbufs, wasted space.
probably will do with further work later.

Reviewed by: various
2008-04-29 21:23:21 +00:00
Oleksandr Tymoshenko
578328c977 Define INLINE_LIMIT and additional CFLAGS for mips.
Approved by:	cognet (mentor)
2008-04-29 11:28:10 +00:00
Marcel Moolenaar
12640815f8 MFp4: SMP support 2008-04-27 22:33:43 +00:00