- Because em_encap() can now fail in a way that leaves us without an
mbuf chain, potentially set *m_headp to NULL if that happens, so that
the caller can do the right thing. This case can occur when we try
to prepend the vlan header mbuf but can't allocate additional memory.
- Modify the caller of em_encap() to detect a NULL m_head and not try
to queue the mbuf if that happens.
- When em_encap() fails, make sure to call bus_dmamap_destroy() to
clean up.
promiscuous mode introduced in 1.45, which programs the em card not
to strip or prepend tags when in promiscuous mode without also
modifying behavior to manually prepend a vlan header in the event
that the card isn't doing it on transmit. Due to a feature of card
operation, if the global VLAN prepend/strip register isn't set,
setting the VLAN tag flag on individual packet descriptors will
cause the packet to be transmitted using ISL encapsulation rather
than 802.1Q VLAN encapsulation.
This fix causes em_encap() to prepend the header by tracking whether
the card is configured to temporarily disable prepending/stripping
due to promiscuous mode. As a result, entering promiscuous mode on
the parent em interface no longer causes vlans to appear to "wedge"
or transmit ISL-encapsulated frames, which typically will not be
configured/spoken by the other endpoints on the VLAN trunk. This
bug may also exist in other drivers, and the additional vlan
encapsulation logic should be abstracted and centralized in
if_vlan.c if so.
RELENG_5_3 candidate.
MFC after: 1 week
Tested by: pjd, rwatson
Reported by: astesin at ukrtelecom dot net
Reported by: Mike Tancsa <mike at sentex dot net>
Reported by: Iasen Kostov <tbyte at OTEL dot net>
with a weak memory model or x86 + PAE (or more specifically, your
driver is using bounce pages) and you have had problems with em(4),
this may fix it. At least this is needed to have em(4) work properly
on FreeBSD/arm.
Original version by: cognet
Reviewed by: tackerman
Tested by: cognet
Since the e1000 DMA engines hava no constraints on the alignment of buffer
transfers, there is no reason to tell busdma that there is. This save a
minimum of 1 malloc call per packet, which translates to eliminating 4 locks.
It also means that buffers are not needlessly bounced when transfered. The
end result is a 38% improvement in pps in a 4 way bridging environment.
Obtained from: Sandvine, Inc.
Removed support for Intel 82541ER
Added fix for 82547 which corrects an issue with Jumbo frames larger than 10k.
Added fix for vlan tagged frames not being properly bridged.
Corrected TBI workaround.
Corrected incorrect LED operation issues
Submitted by: tackerman (Tony Ackerman)
MFC after: 2 weeks
following drivers: bfe(4), em(4), fxp(4), lnc(4), tun(4), de(4) rl(4),
sis(4) and xl(4)
More patches are pending on: http://peoples.freebsd.org/~mlaier/ Please take
a look and tell me if "your" driver is missing, so I can fix this.
Tested-by: many
No-objection: -current, -net
because VLAN hardware features are enabled in em(4) by default.
Note: Currently vlan(4) has a bug that it consults
if_capabilities, not if_capenable. This will be fixed
after all the network drivers set VLAN bits in
if_capenable properly.
mutex to be locked. It is redundant since em_init() is called and this
correctly locks the mutex and calls em_stop().
5.2 release candidate since this can cause a panic if the watchdog
expires.
Tested by: kuriyama
- In the receive routine handle the case where last descriptor could have
less than 4 bytes of data.
- Handle race between detach/ioctl routine.
MFC after: 3 days
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
lock around a call to the original function. Make the timeout
function in callout_reset() use the wrapped function to avoid a
lock assertion panic.
Reviewed by: sam
Reported by: cgiordano@ids.net
o correct recursive locking when polling and in em_82547_move_tail
o destroy mutex on detach
o add EM_LOCK_ASSERT and similar macros for creating+deleteing the mtx
Submitted by: Daniel Eischen <eischen@vigrid.com>
Bug Fixes:
- Allow users to use LAA
- Remember promiscuous mode settings while bridging
- Allow gratuitous arp's to be sent
PR: 52966/54488
MFC after: 1 week
recompiling the driver. See the comments near the top of "if_em.h"
for descriptions of these delays. Four new loader tunables control
the system-wide default values:
hw.em.tx_int_delay
hw.em.rx_int_delay
hw.em.tx_abs_int_delay
hw.em.rx_abs_int_delay
The tunables are specified in microseconds. The valid range is
0-67108 usec., and 0 means that the timer is disabled.
There are also four new sysctls (actually, a set of four for each
"em" device in the system) to query and change the interrupt delays
after the system is up:
hw.em0.tx_int_delay
hw.em0.rx_int_delay
hw.em0.tx_abs_int_delay (not present for 82542/3/4 adapters)
hw.em0.rx_abs_int_delay (not present for 82542/3/4 adapters)
It seems to be OK to change these values even while the adapter is
passing traffic.
Approved by: Prafulla Deuskar <pdeuskar@FreeBSD.ORG>
MFC after: 4 weeks
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.
sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.
If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.
Reviewed by: tmm, gibbs
Add sysctl's to display statistics/debug_info
Set WAIT_FOR_AUTONEG_DEFAULT to zero by default
Increment packet in/out statistics inline instead of every two seconds.
MFC after: 3 days
- Use htole* macros where appropriate so that the driver could work on non-x86 architectures
- Use m_getcl() instead of MGETHDR/MCLGET macros
Submitted by: sam (Sam Leffler)
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
such abuse isn't really needed. (And if we do need type information
associated with a module then we should make it explicit and not
use hacks.)
- Added support for ITR (interrupt throttle register). This feature is available on
adapters based on 82545 and above
- Fixed problem with vlan support when traffic has priority bits set. (kern/45907)
PR: kern/45907
MFC after: 1 week
o don't strip the Ethernet header from inbound packets; pass packets
up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls
Reviewed by: many
Approved by: re
