- Fix clear doorbell queue buffer for ADAPTER_TYPE_B
- Fix release memory resource when detach device
- Add support for ARC-1216, 1226 SAS 12Gb controllers
- Declare some functions as static
- Change checking dword read/write for IOP rqbuffer.
Many thanks to Areca for continuing to support FreeBSD.
Submitted by: 黃清隆 <ching2048 areca com tw>
MFC after: 2 weeks
similar to the kernel memory allocator.
This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated. This also
reduces boilerplate code and simplifies callers.
A wait primitive is supplied for uma zones for similar reasons. This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.
Reviewed by: alc, kib, markj
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Summary:
Existing code recognizes the mcp7941x RTC, but this RTC has an
enable bit at the same location as the "Clock Halt" bit on the ds1307, with an
opposite assertion (set == on, whereas CH set == clock stopped). Thus the
current code halts the clock, with no way to enable it.
Reviewed By: ian
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12961
According to EREF rlwinm is supposed to clear the upper 32 bits of the
register of 64-bit cores. However, from experience it seems there's a bug
in the e5500 which causes the result to be duplicated in the upper bits of
the register. This causes problems when applied to stashed SRR1 accessed
to retrieve context, as the upper bits are not masked out, so a
set_mcontext() fails. This causes sigreturn() to in turn return with
EINVAL, causing make(1) to exit with error.
This bit is unused in e500mc derivatives (including e5500), so could just be
conditional on non-powerpc64, but there may be other non-Freescale cores
which do use it. This is also the same as the POW bit on Book-S, so could
be cleared unconditionally with the only penalty being a few clock cycles
for these two interrupts.
The problem with it was a bogus .OBJDIR in some cases where creation of
object directories were purposely not attempted, such as for 'make cleandir'
and in etc/ sub-directories. In these cases bmake would start with a
bogus .OBJDIR like etc/ due to MAKEOBJDIR being a dynamic value based on
.CURDIR, SRCTOP, and OBJTOP. OBJTOP would not yet be defined but is
during early src.sys.obj.mk. That file and auto.obj.mk both were not
modifying .OBJDIR unless they expected to create the objdir. Thus in
these cases the .OBJDIR was left as etc/* rather than fixed to the
proper .CURDIR.
The issues were fixed in r325404 and r325416. An assertion to avoid the
bad .OBJDIR was added in r325405.
Sponsored by: Dell EMC Isilon
The function is in hot path of the driver (TX) and asking compiler for
making this function inline was changed for consistency and higher
readability.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: rlibby, byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D12854
The patch contains following changes:
* In conditional checks, always check for NULL or 0 instead of negating values
* Use malloc and free explicitely, instead of ENA_MEM_FREE and ENA_MEM_FREE (the
dmadev passed to macro is never used, and could be a little misleading)
* Always check for NULL after calling malloc (few checks were missing)
* Rework naming of the goto tags in ena_attach() for consistency
* Fix error handling in ena_attach() - few goto instructions were leading to the
wrong tag
* Destroy MMIO req read request if attach failed
* Remove checking for NULL after calling malloc with M_WAITOK flag
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reviewed by: byenduri_gmail.com
Obtained from: Semihalf
Sponsored by: Amazon.com, Inc.
Differential Revision: https://reviews.freebsd.org/D12853
* Don't test MACHINE, it's irrelevant to userland and should never be
used in userland Makefiles.
* If we match armv[67] and CPUTYPE is undefined OR it doesn't have
'soft' in it, choose armhf.
* Add a note that the soft float on armv[67] may be broken.
Sponsored by: Netflix
and other similar socket options.
Provide new control message SCM_TIME_INFO to supply information about
timestamp. Currently it indicates that the timestamp was
hardware-assisted and high-precision, for software timestamps the
message is not returned. Reserved fields are added to ABI to report
additional info about it, it is expected that raw hardware clock value
might be useful for some applications.
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D12638
boot for the received packets.
The rcv_tstmp field overlaps the place of Ln header length indicators,
not used by received packets. The basic pkthdr rearrangement change
in sys/mbuf.h was provided by gallatin.
There are two accompanying M_ flags: M_TSTMP means that there is the
timestamp (and it was generated by hardware).
Another flag M_TSTMP_HPREC indicates that the timestamp is
high-precision. Practically M_TSTMP_HPREC means that hardware
provided additional precision comparing with the stamps when the flag
is not set. E.g., for ConnectX all packets are stamped by hardware
when PCIe transaction to write out the completion descriptor is
performed, but PTP packet are stamped on port. For Intel cards, when
PTP assist is enabled, only PTP packets are stamped in the limited
number of registers, so if Intel cards ever start support this
mechanism, they would always set M_TSTMP | M_TSTMP_HPREC if hardware
timestamp is present for the given packet.
Add IFCAP_HWRXTSTMP interface capability to indicate the support for
hardware rx timestamping, and ifconfig(8) command to toggle it.
Based on the patch by: gallatin
Reviewed by: gallatin (previous version), hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks (? mbuf KBI issue)
X-Differential revision: https://reviews.freebsd.org/D12638
:U:Mfoo expands to :Mfoo, apparently. Explicit check for CPUTYPE being
defined, and test for it's value not containing *soft* before calling CRTARCH
armhf.
Tested, somewhat. Unfortunately recent changes appear to have affected
cross-builds where it no longer works, per my tests after universe12a being
upgraded from 07/2017 to 11/2017 sources (DESTDIR isn't being used in WORLDTMP;
MK_SYSTEM_COMPILER might be causing issues right now).
MFC after: 1 week
MFC with: r325502
Reported by: imp
CPUTYPE (apparently) isn't defined in non-cross-builds, which caused
arm/armv[67] hosted/targeted builds to fail when evaluating CPUTYPE.
Add the :U modifier to CPUTYPE so it evaluates to "". This allows armv[67] to
get past the conditional successfully.
MFC after: 1 week
Reported by: bob prohaska <fbsd@www.zefox.net>
- MK_PROFILE is controlled in bsd.opts.mk, which is pulled in via bsd.own.mk,
which is pulled in via bsd.init.mk . All upstream Makefiles which build off
of this one use bsd.init.mk.
- COMPILER_{TYPE,VERSION} is set via bsd.compiler.mk .
This reduces the namespace pollution/complexity somewhat.
MFC after: 1 week
will now prevent the driver from stripping vlan tags from packets.
PR: 219390
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reported by: Charles Goncalves <halfling@halfling.com.br>
Obtained from: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D12795
Use our ifm_list of supported media types rather than nested switch
statements to find the current media type. Find a supported type that
matches the current speed.
Remove all workarounds while updating ifmr->ifm_active.
For BNXT_IFMEDIA_ADD, added Three more speeds IFM_10G_T, IFM_2500_T & IFM_2500_KX.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12896
Preserve packet order between tcp_lro_rx() and if_input() to avoid
creating extra corner cases. If no packets can be LROed, combine them
into one chain for submission via if_input(). If any packet can
potentially be LROed however, retain old behaviour and call if_input()
for each packet.
This should keep the 12% improvement for small packet forwarding intact,
but mostly avoids impacting the LRO case.
Reviewed by: cem, sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12876
Final sweep to prefer bsd.init.mk to src.opts.mk everywhere as a
design pattern. The rule is that all Makefiles in this subtree should
start with .include <bsd.init.mk> so that we properly include
../Makefile.inc and defs.mk before anything else.
Sponsored by: Netflix
Steal the code from kmod.mk and use it to automatically create
links. Modify it a little for the needs of the loader (no need to
guess the OBJS dependency, and we have 32-on-64 cases to contend
with). Remove 15 redundant implementations (which were mostly
different, but kinda the same).
A future commit should factor out this code and that of kmod.mk so we
have only one copy of it in the tree.
Sposnored by: Netflix
Stop building libsa32 on powerpc. Build everything on powerpc64
-m32. Transition to using LIBSA from LIBSA32. This elimiantes the
useless build of libsa on powerpc64 (nothing used to use it) and
should be a more direct way of saying this.
Sponsored by: Netflix
Since the case of an empty chain was already covered, it si very likely
that the existing entry is matching. Skipping readlocking saves on lock
upgrade.
When the segment count is > 16 it spills into an 'indirect descriptor list',
which immediately follows the main table, but the indirect list is entry 15, so
needs to be skipped for the general list.
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated. Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.
Discussed with: bde (who does not like the removal)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
