These calls are not the same in general: the former will dequeue the
page if it is enqueued, while the latter will just leave it alone. But,
all existing uses of the former apply to unmanaged pages, which are
never enqueued in the first place. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20470
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes. Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone. Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.
Like r348026, these CUs did not show up in tinderbox as missing the include.
Reported by: peterj (arm64/mp_machdep.c)
X-MFC-With: r347984
Sponsored by: Dell EMC Isilon
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
The existing SPI support only worked for directly attached flash chips.
it didn't implement clock programming or chipselect. It also supports
transfers with unbalanced tx/rx command sizes.
Submitted by: <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D20101
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
This is reqired to use the gpiofunc behaviour for configuring GPIO
pins at boot time.
Submitted by: <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D20170
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
As discussed in that commit message, it is a dangerous default. But the
safe default causes enough pain on a variety of platforms that for now,
restore the prior default.
Some of this is self-induced pain we should/could do better about; for
example, programmatic CI systems and VM managers should introduce entropy
from the host for individual VM instances. This is considered a future work
item.
On modern x86 and Power9 systems, this may be wholly unnecessary after
D19928 lands (even in the non-ideal case where early /boot/entropy is
unavailable), because they have fast hardware random sources available early
in boot. But D19928 is not yet landed and we have a host of architectures
which do not provide fast random sources.
This change adds several tunables and diagnostic sysctls, documented
thoroughly in UPDATING and sys/dev/random/random_infra.c.
PR: 230875 (reopens)
Reported by: adrian, jhb, imp, and probably others
Reviewed by: delphij, imp (earlier version), markm (earlier version)
Discussed with: adrian
Approved by: secteam(delphij)
Relnotes: yeah
Security: related
Differential Revision: https://reviews.freebsd.org/D19944
AR724X_GPIO_PINS used for this family is defined as 18
The datasheet for the AR7241 describes 20 pins, allow all to be used.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D17580
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
The only reference to p1 after a dead store was in a comment so update
the comment to refer to td1.
Submitted by: sbruno
Differential Revision: https://reviews.freebsd.org/D16226
In all of the architectures we have today, we always use PAGE_SIZE.
While in theory one could define different things, none of the
current architectures do, even the ones that have transitioned from
32-bit to 64-bit like i386 and arm. Some ancient mips binaries on
other systems used 8k instead of 4k, but we don't support running
those and likely never will due to their age and obscurity.
Reviewed by: imp (who also contributed the commit message)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19280
Embedded lzma decompression library becomes a module usable by other
consumers, in addition to geom_uzip.
Most important code changes are
- removal of XZ_DEC_SINGLE define, we need the code to work
with XZ_DEC_DYNALLOC;
- xz_crc32_init() call is removed from geom_uzip, xz module handles
initialization on its own.
xz is no longer embedded into geom_uzip, instead the depend line for
the module is provided, and corresponding kernel option is added to
each MIPS kernel config file using geom_uzip.
The commit also carries unrelated cleanup by removing excess "device geom_uzip"
in places which were missed in r344479.
Reviewed by: cem, hselasky, ray, slavash (previous versions)
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D19266
MFC after: 3 weeks
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
- Distribute RX load across multiple cores, if present. This reverts
r217212, which is no longer relevant (I think because of the newer
SDK).
- Use newer APIs for pinning taskqueue entries to specific cores.
- Deepen RX buffers.
This more than doubles NAT forwarding throughput on my EdgeRouter Lite from,
with typical packet mixture, 90 Mbps to over 200 Mbps. The result matches
forwarding throughput in Linux without the UBNT hardware offload on the same
hardware, and thus likely reflects hardware limits.
Reviewed by: jhibbits
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
Fix dublicate value in what is apparent copypaste mistake. The last value
in mask is supposed to be for counter 7, not counter 3.
PR: 229790
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
cpuid and local cpu variable are unsigned so checking if value is less than zero
always yields false.
PR: 211088
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
Per discussions on mips@, 32-bit mips SMP is now unsupported. The
files in the tree will compile for a while longer, but when the
atomic_swap_64 or similar atomic enters into the MI part of the tree,
as currently foreseen sometime next year, these ports will start to no
longer link. The JZ4780 is the only such system we have.
The UP version of this chip is unaffected by this, and will remain
supported.
Discussed on: mips@
Relnotes: yes
This is an older broadcom part that implements the mips32 ISA. 32-bit
FreeBSD/mips now requires mips32r2, so retire this config. Most of the
broadcom port is shared with newer ports, so what little code may be
unique to this part has not been GC'd at this time.
Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543
This was useful in bring up. However, it causes more issues than the
support is worth (64-bit atomics being chief among them).
Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543
gxemul was a nice stop-gap while qemu support for mips was firmed
up. Now MALTA* + qemu is the platform of choice retire gxemul support.
It's unknown when this was last confirmed working.
Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543
relevant and is unused. It's also getting in the way of progress in
some admittedly minor ways. Better to retire it to reduce the burden
on the project.
Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543
fcmpset returns true/false as a int, so make the return types and
variables match the int to be consistent with other arch.
Reviewed by: cognet@
Differential Revision: https://reviews.freebsd.org/D18557
MIPS64 has 64-bit longs, so use uint64_t for it, otherwise uint32_t.
sizeof(long) == sizeof(ptr) for all platforms, so define
atomic_swap_ptr in terms of atomic_swap_long.
Submitted by: hps@
