Without this changeset there will be no way to prevent these NICs from
sending ARP, which is harmful in server farms that is configured as
"Direct Server Return" behind a load balancer.
A better fix would remove the whole hack completely but it would be
later than 8.0-RELEASE.
Reviewed by: jfv, yongari
Approved by: re (kib)
- usb_pc_cpu_invalidate() is called between [consecutive] reads from a device,
so a sequence of BUS_DMASYNC_POSTREAD and _PREREAD should be used. Note we
cannot use or'ed shorthand ( _POSTREAD | _PREREAD) for BUS_DMASYNC flags, as
the low level bus dma sync operation is implementation dependent and we
cannot assume the required order of operations to be guaranteed.
- usb_pc_cpu_flush() is called before writing to a device, so
BUS_DMASYNC_PREWRITE should be used.
Submitted by: Grzegorz Bernacki
Reviewed by: HPS, arm@, usb@ ML
Tested by: HPS, Mike Tancsa
Approved by: re (kib)
Obtained from: Semihalf
- Only print the warning once, instead of filling up the screen.
- Use the word "legacy" for the pty_warningcnt description, to prevent
confusion.
- Use log() instead of printf().
Discussed with: rwatson, jhb
Approved by: re (kib)
restart the scan after acquiring the lock the hard way. Otherwise we might
end up with a dead reference.
Reported by: pfsense
Reviewed by: eri
Initial patch by: eri
Tested by: pfsense
Approved by: re (kib)
loop iteration as it can be updated by the card while we
process the RX ring forcing us to process RX descriptors
for which DMA synchronisation operation has not been
performed. This fixes the bug when bge(4) drops packets
under high load.
Discussed with: yongari, marius
Approved by: re (kib)
MFC after: 1 week
the mbuf for obtaining the fib index
- check that a cached flow corresponds to the same fib index as the
packet for which we are doing the lookup
- at interface detach time flush any flows referencing stale rtentrys
associated with the interface that is going away (fixes reported
panics)
- reduce the time between cleans in case the cleaner is running at
the time the eventhandler is called and the wakeup is missed less
time will elapse before the eventhandler returns
- separate per-vnet initialization from global initialization
(pointed out by jeli@)
Reviewed by: sam@
Approved by: re@
value instead of blindly resetting it to 0. However, it seems page
select bits of some 88E1116 PHY is initialized to invalid one such
that restoring page select bits after programming broke MII
register access. The correct solution would be reset page select
bits to 0 in PHY attach stage but it would require more testing.
Since we're in BETA stage such a change would be dangerous so just
back it out.
This change should fix nfe(4) breakage on NVIDIA MCP55.
Reported by: Ryan Rogers < webmaster <> doghouserepair dot com >
Sam Fourman Jr. < sfourman <> gmail dot com >
Tested by: Ryan Rogers < webmaster <> doghouserepair dot com >
Sam Fourman Jr. < sfourman <> gmail dot com >
Approved by: re (kib)
for ATA_SETFEATURES/ATA_SF_SETXFER command which by definition transfers no
data. Most of controllers are irrelevant to this bug, but some nVidia's
doesn't.
Tested on: current@
Approved by: re (kib)
a pointer-fetching specific operation check. Consequently, rename the
operation ASSERT_ATOMIC_LOAD_PTR().
* Fix the implementation of ASSERT_ATOMIC_LOAD_PTR() by checking
directly alignment on the word boundry, for all the given specific
architectures. That's a bit too strict for some common case, but it
assures safety.
* Add a comment explaining the scope of the macro
* Add a new stub in the lockmgr specific implementation
Tested by: marcel (initial version), marius
Reviewed by: rwatson, jhb (comment specific review)
Approved by: re (kib)
by CHS addressing. Don't define these fields as 0xff, but rather define
them correctly. This prevents boot problems on PCs where GPT is being
used.
PR: 115406
Submitted by: Kent Hauser <kent@khauser.net>
Approved by: re (kib)
when pmap_demote_pde() allocates a page table page to implement a
user-space demotion, it must increment the pmap's resident page count.
Not doing so, can lead to an underflow during address space termination
that causes pmap_remove() to exit prematurely, before it has destroyed
all of the mappings within the specified range. The ultimate effect or
symptom of this error is an assertion failure in vm_page_free_toq()
because the page being freed is still mapped.
This error is only possible when superpage promotion is enabled. Thus,
it only affects FreeBSD versions greater than 7.2.
Tested by: pho, alc
Reviewed by: alc
Approved by: re (rwatson)
MFC after: 1 week
(..), calling readdir and looking for previous directory inode. In case of
.zfs/ directory this doesn't work, because .zfs/ is hidden by default, so it
won't be visible in readdir output.
Fix this by implementing VPTOCNP for snapshot directories, so __getcwd()
doesn't fail and getcwd() doesn't have to use readdir method.
This fixes /bin/pwd from within .zfs/snapshot/<name>/.
Suggested by: kib
Approved by: re (rwatson)
replace it with wrappers around our taskqueue(9).
To make it possible implement taskqueue_member() function which returns 1
if the given thread was created by the given taskqueue.
Approved by: re (kib)
initialized. Also destroy /dev/zfs before doing other deinitializations.
- Initialization through taskq is no longer needed and there is a race
where one of the zpool/zfs command loads zfs.ko and tries to do some work
immediately, but /dev/zfs is not there yet.
Reported by: pav
Approved by: re (kib)
cosmetic change to reduce cruft in the proc table.
Also change the idle wait message to `-` like how taskqueues are.
Reviewed by: julian
Approved by: re (kib)
the kern.polling.enable sysctl, remove the sysctl. It has been deprecated
since FreeBSD 6 in favour of per-ifnet polling flags.
Reviewed by: luigi
Approved by: re (kib)
association setup.
* Fix a bug where message with illegal stream ids are not deleted.
* Fix a crash when reporting back unsent messages from the send_queue.
* Fix a bug related to INIT retransmission when the socket is already
closed.
* Fix a bug where associations were stalled when partial delivery API
was enabled.
* Fix a bug where the receive buffer size was smaller than the
partial_delivery_point.
Approved by: re, rrs (mentor)
MFC after: One day.
will initialize the FIFO memory correctly on attach. Before
that this values was intialized in only in at91_usart_bus_attach
which is called after the uart(4) memory allocation happens.
Approved by: re (kib)
MFC after: 1 week
mismatch between the cached entry and the intended destination. The
cached rtentry{} is flushed but the associated llentry{} is not. This
causes the wrong destination MAC address being used in the output
packets. The fix is to flush the llentry{} when rtentry{} is cleared.
Reviewed by: kmacy, rwatson
Approved by: re
Check that the given variable is at most uintptr_t in size and that
it is aligned.
Note: ASSERT_ATOMIC_LOAD() uses ALIGN() to check for adequate
alignment -- however, the function of ALIGN() is to guarantee
alignment, and therefore may lead to stronger alignment
enforcement than necessary for types that are smaller than
sizeof(uintptr_t).
Add checks to mtx, rw and sx locks init functions to detect possible
breakage. This was used during debugging of the problem fixed with
r196118 where a pointer was on an un-aligned address in the dpcpu area.
In collaboration with: rwatson
Reviewed by: rwatson
Approved by: re (kib)
- Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc()
routines in the local APIC code that the hwpmc(4) driver can use to
manage the local APIC PMC interrupt vector.
- Do not enable the local APIC PMC interrupt vector by default when
HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly
enables the interrupt when it is succesfully initialized and disables
the interrupt when it is unloaded. This avoids enabling the interrupt
on unsupported CPUs which may result in spurious NMIs.
Reported by: rnoland
Reviewed by: jkoshy
Approved by: re (kib)
MFC after: 2 weeks
truncate(2) call, or by being removed or truncated on open, either
new softupdate freeblks structure is allocated to track the freed
blocks of the node, or truncation is done syncronously when too many SU
dependencies are accumulated. The decision does not take into account
the allocated freeblks dependencies, allowing workloads that do huge
amount of truncations to exhaust the kernel memory.
Take the number of allocated freeblks into consideration for
softdep_slowdown().
Reported by: pluknet gmail com
Diagnosed and tested by: pho
Approved by: re (rwatson)
MFC after: 1 month
pathes, as far as I see and testing seems to confirm it. Comparision of
old_lock with LK_SHARED make sense only if vnode is locked by current
thread.
When downgrading, pass LK_RETRY to the vn_lock(), since otherwise
vn_lock() unlocks the doomed vnode, causing extra unlock.
Reported and tested by: pho
Approved by: re (rwatson)
MFC after: 3 weeks
Receiving any ip packet for which there is no existing socket will
crash if ipfw has a uid or gid test rule, as the uid/gid
of the non existent owner of said non existent socket is tested.
Brooks introduced this error as part of his >16 gids patch.
It appears to be a cut-n-paste error from similar code a few lines
before. The old code used the 'pcb' variable here, but in the
new code that switched the 'inp' variable, which is often NULL
and what is tested in the code further up. The rest of the multi-gid
patch for ipfw seems solid (and cleaner than previous code).
Reviewed by: brooks
Approved by: re (rwatson)
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions. This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding
This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.
Please don't forget to update your config file with the STOP_NMI
option removal
Reviewed by: jhb
Tested by: pho, bz, rink
Approved by: re (kib)
with their own virtual network stack. Jails only inheriting a
network stack cannot change anything that cannot be changed from
within a prison.
Reviewed by: rwatson, zec
Approved by: re (kib)
NET_RT_DUMP, which otherwise only returned information of AF_MAX.
This was broken in r193232 (save your time - my bug, my fix).
PR: kern/137700
Reported by: Larry Baird (lab gta.com)
Tested by: Larry Baird (lab gta.com)
Reviewed by: zec, lstewart, qing
Approved by: re (kib)
band-aid for the general problem that if_link_state_change can be
called between if_detach and if_free leaving a task queued that has
been free'd.
Spotted by: thompsa
Reviewed by: rwatson
Approved by: re (rwatson)
address is configured with a /128 prefix. This is no longer necessary due
to r192011. In fact that code conflicts with r192011. This patch removes
the host route installation when detecting the /128 prefix, and instead
let the code added by r192011 to install the loopback route for that IPv6
interface address.
Reviewed by: bz
Approved by: re
so that it returns failure instead of crashing when "m->m_len" is
executed and m == NULL. The mbuf ptr can be NULL when a call to
xdrmbuf_getbytes() gets the bytes it needs, but they are at the end
of a short RPC reply. When this happens, xdrmbuf_getbytes() returns
success, but advances the mbuf ptr (xdrs->x_private) to m_next, which
is NULL. If this is followed by a call to xdrmbuf_getlong(), it calls
xdrmbuf_inline(), which would cause a crash by accessing "m->m_len".
Tested by: pho, serenity at exscape dot org
Approved by: re (rwatson), kib (mentor)
While show pcpu prints pc_dynamic this also prints the original
memory address as well as the maths.
Once dpcpu goes NUMA this is considered to help debugging as well.
Reviewed by: rwatson
Approved by: re
when adding the __start_ symbol knows the expected section alignment
and can place the __start_ symbol correctly.
These sections will not support symbols with super-cache line alignment
requirements.
For full details, see posting to freebsd-current, 2009-08-10,
Message-ID: <20090810133111.C93661@maildrop.int.zabbadoz.net>.
Debugging and testing patches by:
Kamigishi Rei (spambox haruhiism.net),
np, lstewart, jhb, kib, rwatson
Tested by: Kamigishi Rei, lstewart
Reviewed by: kib
Approved by: re
all pertinent statatistics for the subsystem. These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.
Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored. This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.
The following modules are affected by this change:
if_bridge
if_cxgb
if_gif
ip_mroute
ipdivert
pf
In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack. However, that change is too agressive for
this point in the release cycle.
Reviewed by: bz
Approved by: re (kib)
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.
Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.
For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.
Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.
Bump __FreeBSD_version in order to reflect the newbus lock introduction.
Reviewed by: ed, hps, jhb, imp, mav, scottl
No answer by: ariff, thompsa, yongari
Tested by: pho,
G. Trematerra <giovanni dot trematerra at gmail dot com>,
Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by: Yahoo! Incorporated
Approved by: re (ksmith)
- fix write() on pseudo-terminal masters to return the amount of bytes
passed to the TTY, not the amount of bytes read from user.
- fix ttydisc_rint_bypass() to set the high watermark when it cannot
write all input, just like ttydisc_rint() itself.
Approved by: re (kib)
vnet.c to iterate virtual network stacks without being aware of
the implementation details previously hidden in kern_vimage.c.
Now they are in the same file, so remove this added complexity.
Reviewed by: bz
Approved by: re (vimage blanket)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
firmware loading bugs.
Target mode support has received some serious attention to make it
more usable and stable.
Some backward compatible additions to CAM have been made that make
target mode async events easier to deal with have also been put
into place.
Further refinement and better support for NP-IV (N-port Virtualization)
is now in place.
Code for release prior to RELENG_7 has been stripped away for code clarity.
Sponsored by: Copan Systems
Reviewed by: scottl, ken, jung-uk kim
Approved by: re
instead of whatever the parent/system has (which is generally 0). This
mirrors the old-style default used for jail(2) in conjunction with the
security.jail.enforce_statfs sysctl.
Approved by: re (kib), bz (mentor)
- Don't grab the filedesc lock just to read fd_cmask.
- Drop vnode locks earlier when mounting the root filesystem and before
sanitizing stdin/out/err file descriptors during execve().
Submitted by: kib
Approved by: re (rwatson)
MFC after: 1 week
in prison_equal_ip4/6 while an inp mutex was held. Locking allprison_lock
can be avoided by making a restriction on the IP addresses associated with
jails:
Don't allow the "ip4" and "ip6" parameters to be changed after a jail is
created. Setting the "ip4.addr" and "ip6.addr" parameters is allowed,
but only if the jail was already created with either ip4/6=new or
ip4/6=disable. With this restriction, the prison flags in question
(PR_IP4_USER and PR_IP6_USER) become read-only and can be checked
without locking.
This also allows the simplification of a messy code path that was needed
to handle an existing prison gaining an IP address list.
PR: kern/136899
Reported by: Dirk Meyer
Approved by: re (kib), bz (mentor)
USB core:
- add support for defragging of written device data.
- improve handling of alternate settings in device side mode.
- correct return value from usbd_get_no_alts() function.
- reported by: HPS
- P4 ID: 166156, 166168
- report USB device release information to devd and pnpinfo.
- reported by: MIHIRA Sanpei Yoshiro
- P4 ID: 166221
Submitted by: hps
Approved by: re
See PR description for more info. Patch is
implemented differently than suggested, but
having the same result.
PR: usb/137188
Submitted by: hps
Approved by: re
- add support for defragging of written device data.
- improve handling of alternate settings in device side mode.
- correct return value from usbd_get_no_alts() function.
- reported by: HPS
- P4 ID: 166156, 166168
- report USB device release information to devd and pnpinfo.
- reported by: MIHIRA Sanpei Yoshiro
- P4 ID: 166221
Submitted by: hps
Approved by: re
- Add minimum polling support to drive UMASS
and UKBD in case of panic.
- Add extra check to ukbd probe to fix problem about
mouse devices attaching like keyboards.
- P4 ID: 166148
Submitted by: hps
Approved by: re
- add support for setting the UMS polling rate through -F option
passed to moused.
- requested by Alexander Best
- P4 ID: 166075
PR: usb/125264
Submitted by: hps
Approved by: re
jails have their own IP stack and don't have access to the parent IP
addresses anyway. Note that a virtual network stack forms a break
between prisons with regard to the list of allowed IP addresses.
Approved by: re (kib), bz (mentor)
"disable", which only allows access to the parent/physical system's
IP addresses when specifically directed. Change the default value of
"host" to "new", and don't copy the parent host values, to insulate
jails from the parent hostname et al.
Approved by: re (kib), bz (mentor)
for NFSv2 and not NFSv4 when nfscl_mustflush() returns 0. Since
nfscl_mustflush() only returns 0 when there is a valid write delegation
issued to the client, it only affects the case of an NFSv4 mount with
callbacks/delegations enabled.
Approved by: re (kensmith), kib (mentor)
when memory page caching attributes changed, and CPU does not support
self-snoop, but implemented clflush, for i386.
Take care of possible mappings of the page by sf buffer by utilizing
the mapping for clflush, otherwise map the page transiently. Amd64
used direct map.
Proposed and reviewed by: alc
Approved by: re (kensmith)
provide specific macros, AUDIT_ARG_UPATH1() and AUDIT_ARG_UPATH2()
to capture path information for audit records. This allows us to
move the definitions of ARG_* out of the public audit header file,
as they are an implementation detail of our current kernel-internal
audit record, which may change.
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
to avoid exposing ARG_ macros/flag values outside of the audit code in
order to name which one of two possible vnodes will be audited for a
system call.
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 month
instead of the root/current working directory as the starting point for
lookups. Up to two such descriptors can be audited. Add audit record
BSM encoding for fooat(2).
Note: due to an error in the OpenBSM 1.1p1 configuration file, a
further change is required to that file in order to fix openat(2)
auditing.
Approved by: re (kib)
Reviewed by: rdivacky (fooat(2) portions)
Obtained from: TrustedBSD Project
MFC after: 1 month
L2 information. For an indirect route the cached L2 entry contains the
MAC address of the gateway. Typically the default route is used to
transmit multicast packets when explicit multicast routes are not
available. The ether_output() function bypasses L2 resolution function
if it verifies the L2 cache is valid, because the cached L2 address
(a unicast MAC address) is copied into the packets as the destination
MAC address. This validation, however, does not apply to broadcast and
multicast packets because the destination MAC address is mapped
according to a standard method instead.
Submitted by: Xin Li
Reviewed by: bz
Approved by: re
processing code holds the read lock (when processing a
FWD-TSN for pr-sctp). If it finds stranded data that
can be given to the application, it calls sctp_add_to_readq().
The readq function also grabs this lock. So if INVAR is on
we get a double recurse on a non-recursive lock and panic.
This fix will change it so that readq() function gets a
flag to tell if the lock is held, if so then it does not
get the lock.
Approved by: re@freebsd.org (Kostik Belousov)
MFC after: 1 week
- Allow loopback route to be installed for address assigned to
interface of IFF_POINTOPOINT type.
- Install loopback route for an IPv4 interface addreess when the
"useloopback" sysctl variable is enabled. Similarly, install
loopback route for an IPv6 interface address when the sysctl variable
"nd6_useloopback" is enabled. Deleting loopback routes for interface
addresses is unconditional in case these sysctl variables were
disabled after an interface address has been assigned.
Reviewed by: bz
Approved by: re
old ABI versions of the relevant control system call (e.g.
freebsd7_freebsd32_msgctl() instead of freebsd32_msgctl() for msgsys()).
Approved by: re (kib)
panic when in zfs_fuid_create_cred() when userid is negative. It is
converted to unsigned value which makes IS_EPHEMERAL() macro to
incorrectly report that this is ephemeral ID. The most reasonable
solution for now is to always report that the given ID is not ephemeral.
PR: kern/132337
Submitted by: Matthew West <freebsd@r.zeeb.org>
Tested by: Thomas Backman <serenity@exscape.org>, Michael Reifenberger <mike@reifenberger.com>
Approved by: re (kib)
MFC after: 2 weeks
* don't clobber proxy entries
* HWMP seq number processing, including discard of old frames
* flush routing table entries based on nexthop
* print route flags in ifconfig
* more debugging messages and comments
Proxy changes submitted by sam.
Approved by: re (kib)
requesting IDENTIFY from slave device first. This order is important
for proper cable type detection by master device.
PR: kern/136438
Approved by: re (kib)
things a bit:
- use dpcpu data to track the ifps with packets queued up,
- per-cpu locking and driver flags
- along with .nh_drainedcpu and NETISR_POLICY_CPU.
- Put the mbufs in flight reference count, preventing interfaces
from going away, under INVARIANTS as this is a general problem
of the stack and should be solved in if.c/netisr but still good
to verify the internal queuing logic.
- Permit changing the MTU to virtually everythinkg like we do for loopback.
Hook epair(4) up to the build.
Approved by: re (kib)
(ifconfig ifN (-)vnet <jname|jid>) work correctly.
Move vi_if_move to if.c and split it up into two functions(*),
one for each ioctl.
In the reclaim case, correctly set the vnet before calling if_vmove.
Instead of silently allowing a move of an interface from the current
vnet to the current vnet, return an error. (*)
There is some duplicate interface name checking before actually moving
the interface between network stacks without locking and thus race
prone. Ideally if_vmove will correctly and automagically handle these
in the future.
Suggested by: rwatson (*)
Approved by: re (kib)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
ability to retrieve the group list of each process.
Modify procstat's -s option to query this mib when the kinfo_proc
reports that the field has been truncated. If the mib does not exist,
fall back to the truncated list.
Reviewed by: rwatson
Approved by: re (kib)
MFC after: 2 weeks
- When a vlan event occurs a check was not made that
the event was actually for the interface, thus resulting
in a panic. All three drivers have this vulnerability. Add
a check for this condition.
- Secondly, there was a duplicate buf_ring free in the em
driver resulting in a panic on unload. Remove.
Approved by: re
part that is made up of 8K banks rather than 4K, if these
systems are using bank 1 then the last change in this code
breaks the bank read, resulting in an invalid checksum of
the eeprom during driver load. This change fixes this.
Approved by: re
frequency w/o regulatory issues, do this by hooking if_transmit and
if_output with routines that discard all transmits
Reviewed by: thompsa, cbzimmer (intent)
Approved by: re (kensmith)
in up to 16 (KI_NGROUPS) values and steal a bit from ki_cr_flags
(all bits currently unused) to indicate overflow with the new flag
KI_CRF_GRP_OVERFLOW.
This fixes procstat -s.
Approved by: re (kib)
a device pager (OBJT_DEVICE) object in that it uses fictitious pages to
provide aliases to other memory addresses. The primary difference is that
it uses an sglist(9) to determine the physical addresses for a given offset
into the object instead of invoking the d_mmap() method in a device driver.
Reviewed by: alc
Approved by: re (kensmith)
MFC after: 2 weeks
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
if input-device is unavailable. The Xserve G5 defaults to using
screen/keyboard for output-device/input-device even if these are not
installed, and then falls back to serial ports at boot time.
Reviewed by: marcel
Hardware from: grehan
Approved by: re (kib)
experimental NFSv4 client might try and use it as an IPv6 address,
breaking callbacks. The fix simply initializes the isinet6 variable
for this case.
Approved by: re (kensmith), kib (mentor)
doesn't exist and user doesn't have write access to the file.
Without this fix, it returns bogus value instead of 0. For some
reason this didn't manifest on my kernel compiled with -O0.
PR: kern/136601
Submitted by: Jaakko Heinonen <jh at saunalahti dot fi>
Approved by: re (kib)
