Commit Graph

30575 Commits

Author SHA1 Message Date
bde
ed011e55cb FIxed missing include in synopsis. 1998-08-03 17:29:44 +00:00
bde
d50829cd8e FIxed bitrot in prototype in synopsis. 1998-08-03 17:27:41 +00:00
dfr
fc4cb2cea6 Use explicitly sized types when digging through packet headers.
Reviewed by: Julian Elischer <julian@whistle.com>
1998-08-03 17:23:37 +00:00
bde
b0f1ad7788 Changed prototype in synopsis to match prototype in <pthread.h>. 1998-08-03 16:54:51 +00:00
bde
f4657fb06b Fixed missing header in synopsis. 1998-08-03 16:29:31 +00:00
bde
589ee87735 isnetworktty -> isnettty. ttyent.h has already gone through 3
revisions to match the confusing spelling in getttyent.c (1 to
break it to match the man page and 1 in each of 2 branches to fix
it).  This function seems to be orphaned and unused.
1998-08-03 15:35:41 +00:00
yokota
df0803d1a1 Added the `saver' key definition. The saver key will activate the screen
saver if one is loaded.
1998-08-03 11:33:22 +00:00
yokota
506dee0328 1. Reorganized screen saver related code so that both the LKM screen
saver and splash screen can all work properly with syscons.  Note that
the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it
requires additional code from msmith.

- Reorganized the splash screen code to match the latest development
  in this area.
- Delay screen switch in `switch_scr()' until the screen saver is
  stopped, if one is running,
- Start the screen saver immediately, if any, when the `saver' key is
  pressed. (There will be another commit for `kbdcontrol' to support
  this keyword in the keymap file.)
- Do not always stop the screen saver when mouse-related ioctls
  are called.  Stop it only if the mouse is moved or buttons are
  clicked; don't stop it if any other mouse ioctls are called.

2. Added provision to write userland screen savers.  (Contact me if you
are interested in writing one.)

- Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to
  support userland screen savers.

3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
bde
ef6d9fe5f0 Fixed garbage after comment after #endif. Fixed reversed sense of same
comment.
1998-08-03 10:59:02 +00:00
kato
0e7d4663e3 Sync with sys/i386/isa/syscons.h revision 1.38. 1998-08-03 10:50:57 +00:00
kato
adbad99e8e Sync with sys/i386/isa/syscons.c revision up to 1.271. 1998-08-03 10:50:27 +00:00
kato
29c78c7184 Sync with sys/i386/i386/userconfig.c revision 1.106. 1998-08-03 10:49:18 +00:00
yokota
fb540ba984 - When the system is shut down, switch to the vty0 if possible.
- Don't try to ring bell when system is going down. Beacuse the clock
  code is about to be stopped, the timeout routine won't be called
  anymore.
1998-08-03 09:18:58 +00:00
yokota
513eb689bc Fix the bug which always reallocated the cut buffer whenever
the screen mode is changed even if another vty has larger size.
Reallocate the buffer only when the new screen size is larger than
the current cut buffer size.
1998-08-03 09:17:06 +00:00
yokota
8c6ba1f58e Don't accept the blank time value, if it is too big.
PR: bin/6188
1998-08-03 09:15:36 +00:00
yokota
5c2620bec2 - Set bell pitch in hertz and duration in msecs.
The change corresponds to syscons.c 1.268.

PR: bin/6037
Submitted by: Kouichi Hirabayashi (kh@eve.mogami-wire.co.jp)
1998-08-03 09:12:39 +00:00
yokota
c54fb2066b - Add new bell types: "quiet.normal" and "quiet.visual".
When bell is of "quiet" types, the console won't ring (or flush)
  if the ringing process is in a background vty.
  PR: i386/2853

- Modify the escape sequence 'ESC[=%d;%dB' so that bell pitch and
  duration are set in hertz and msecs by kbdcontrol(1).
  There will be a corresponding kbdcontrol patch.
  PR: bin/6037
  Submitted by: Kouichi Hirabayashi (kh@eve.mogami-wire.co.jp)
1998-08-03 09:09:35 +00:00
bde
c4e1dd04fb Fixed building -current under 2.2.6 using `make world'. Moved some
recently added definitions from sys.mk to bsd.own.mk.  Include the
src-relative bsd.own.mk in src/Makefile to pick up all new definitions.
Don't check that MACHINE_ARCH is defined in src/Makefile, since it is
(and should have been) guaranteed to be defined.
1998-08-03 08:28:14 +00:00
charnier
4d4ca48c85 Use errx() instead of err() for malloc failures. -Wall. Do not dot
terminate errx() string. Remove unused #includes. Use .Tn for NFS.
1998-08-03 06:44:46 +00:00
charnier
0fc51bafab Document -n (soft-update) flag.
Add rcsid, remove unused #includes. Sync usage() and SYNOPSIS.
1998-08-03 06:41:20 +00:00
charnier
3c48dac533 .Nm swapon -> .Nm.
Sort #includes. Add rcsid.
1998-08-03 06:35:01 +00:00
charnier
25f789f509 Correct use of .Nm and .Ev.
Add rcsid, rmove unused #include. Spelling.
1998-08-03 06:32:57 +00:00
charnier
36b4b3712e Typo: i. e. -> i.e.
Remove unused #include.
1998-08-03 06:24:59 +00:00
charnier
0432758e6b Correct use of .Nm. Add rcsid. Do not dot terminate err(3) strings. Spelling. 1998-08-03 06:22:43 +00:00
charnier
0d7f7325ec Correct use of .Nm, add .An. 1998-08-03 06:19:47 +00:00
peter
2a9768fc55 This commit was generated by cvs2svn to compensate for changes in r38032,
which included commits to RCS files with non-trunk default branches.
1998-08-03 05:56:20 +00:00
peter
3299490505 Import sendmail-8.9.1 (slightly trimmed) onto a fresh branch under
src/contrib as per various discussions.  I will copy across our changes
and then point the Makefiles across once the dust has settled..
1998-08-03 05:56:20 +00:00
hoek
a70d246f15 Ignore (effectively) SIGTSTP if we're already in the process of tstoping. 1998-08-03 03:11:09 +00:00
wpaul
86f0f2b26f Updates for the ThunderLAN driver:
- probe for PHYs by checking the BMSR (phy status) register instead
  of the vendor ID register.

- fix the autonegotiation routine so that it figures out the autonegotiated
  modes correctly.

- add tweaks to support the Olicom OC-2326 now that I've actually had
  a chance to test one

	o Olicom appears to encode the ethernet address in the EEPROM
	  in 16-bit chunks in network byte order. If we detect an
	  Olicom card (based on the PCI vendor ID), byte-swap the station
	  address accordingly.

	  XXX The Linux driver does not do this. I find this odd since
	  the README from the Linux driver indicates that patches to
	  support the Olicom cards came from somebody at Olicom; you'd
	  think if anyone would get that right, it'd be them. Regardless,
	  I accepted the word of the disgnoatic program that came bundled
	  with the card as gospel and fixed the attach routine to make
	  the station address match what it says.

	o The version of the 2326 card that I got for testing is a
	  strange beast: the card does not look like the picture on
	  the box in which it was packed. For one thing, the picture
	  shows what looks like an external NS 83840A PHY, but the
	  actual card doesn't have one. The card has a TNETE100APCM
	  chip, which appears to have not only the usual internal
	  tlan 10Mbps PHY at MII address 32, but also a 10/100 PHY
	  at MII address 0. Curiously, this PHY's vendor and device ID
	  registers always return 0x0000. I suspect that this is
	  a mutant version of the ThunderLAN chip with 100Mbps support.
	  This combination behaves a little strangely and required the
	  following changes:

		- The internal PHY has to be enabled in tl_softreset().
		- The internal PHY doesn't seem to come to life after
		  detecting the 100Mbps PHY unless it's reset twice.
		- If you want to use 100Mbps modes, you have to isolate
		  the internal PHY.
		- If you want to use 10Mbps modes, you have to un-isolate
		  the internal PHY.

	The latter two changes are handled at the end of tl_init(): if
	the PHY vendor ID is 0x0000 (which should not be possible if we
	have a real external PHY), then tl_init() forces the internal
	PHY's BMCR register to the proper values.
1998-08-03 01:33:12 +00:00
alex
5d69d2598b The pthreads standard has been published. Change:
...is expected to conform to IEEE (``POSIX'') Std 1003.1c when it is
   published.
to:
   ...conforms to ISO/IEC 9945-1 ANSI/IEEE (``POSIX'') Std 1003.1 Second
   Edition 1996-07-12.

Discussed with:	jb
1998-08-03 00:58:37 +00:00
alex
9f99cda126 A style fix for my previous commit. 1998-08-02 23:07:25 +00:00
hoek
62b257a6d9 Add missing "else", without whom the prev. commit is a null change.
Fix a 2nd level indentation style bug.
1998-08-02 22:47:11 +00:00
alex
a9c05a1ce9 Fixed a race condition during the first lock/trylock of a statically
initialized mutex.  Statically initialized mutexes are actually
initialized at first use (pthread_mutex_lock/pthread_mutex_trylock).
To prevent concurrent initialization by multiple threads, all
static initializations are now serialized by a spinlock.

Reviewed by:	jb
1998-08-02 17:04:25 +00:00
bde
1d56e79a13 Fixed printf format errors. 1998-08-02 16:44:18 +00:00
bde
b7b0859c3f Fixed printf format errors. 1998-08-02 16:06:35 +00:00
bde
dbc09be291 Fixed printf format errors. 1998-08-02 15:18:45 +00:00
bde
559a9a5f7d Fixed printf format errors. gcc should have a macro HOST_PTR_PRINTF_TYPE
to go with its HOST_PTR_PRINTF[_FORMAT], since if %p is wrong for the
format then `void *' is probably wrong for the type.
1998-08-02 14:57:00 +00:00
bde
aaeb261fcc Fixed printf format errors. 1998-08-02 14:41:34 +00:00
bde
950c1ed802 Fixed printf format warnings for non-errors. This change is null unless
a system header defines a macro __printf0like() using the new printf0
format attribute.  uucp's internal ulog() function isn't actually
printf-like but uucp normally declares it as such.
1998-08-02 14:35:35 +00:00
bde
f2d2a0561a Fixed printf format errors (time_t is not necessarily long). 1998-08-02 14:25:24 +00:00
bde
06571cef5a Oops, the SRCDIR=${.OBJDIR} hack is still necessary, (since bsd.doc.mk
has to cd to ${SRCDIR} to support inclusion messes elsewhere).
Fortunately the previous commit forgot to remove it.
1998-08-02 14:21:35 +00:00
bde
8a2bb30022 Cleaned up. tmac.srefs was in both SRCS and EXTRAS. The
SRCDIR=${.OBDDIR} hack is now unnecessary.  It was never necessary
to use so many explicit paths to ${.OBJDIR} and ${.CURDIR}.
1998-08-02 14:07:27 +00:00
bde
2f98cd2d0f Don't use `::' to break dependencies. Cleaned some nearby things. 1998-08-02 14:00:39 +00:00
bde
09797423d9 Use a different hack in the ${DFILE} rule to keep indirect dependencies
(mostly for includes) separate from direct dependencies (so that ${.ALLSRC}
can be used to find full paths to the sources for the direct dependencies
only).  The `::' hack just forgot the indirect dependendencies.  This
broke building doc/usd/13.viref with `make -jN' - the index got corrupted
by being built twice concurrently.

Cleaned up the ${DFILE} rule.  There was a .else clause with dead code in
it following a .else clause (make accepts this bad syntax).  ${.ALLSRC}
now works in the USE_SOELIMPP case.  Some client Makefiles no longer need
the SRCDIR=${.OBJDIR} hack.
1998-08-02 13:50:23 +00:00
brian
7603926540 PR: 7469
Be careful that the current or next prompt in the list
that we're iterating through doesn't get changed by
descriptor_Read().
1998-08-02 13:01:16 +00:00
gpalmer
2916928fb5 Add the ISP Qlogic SCSI card to the list of known devices. 1998-08-02 09:32:52 +00:00
wosch
d2d8dfe1c5 Malformed conditional if MACHINE_ARCH is not defined. From rev 1.195. 1998-08-02 09:24:59 +00:00
brian
1312bb150c On receipt of a sig 15, do a full bundle_Close() even if
our current phase is PHASE_DEAD as it's possible that there
are links stuck in OPENING waiting for a redial timer.
1998-08-02 06:56:40 +00:00
dg
d36ff66a00 Added 82555B support for media status. 1998-08-02 00:33:38 +00:00
dg
37e4dcfa9b Reordered fxp_softc for optimal cacheline behavior. 1998-08-02 00:29:15 +00:00