sesX device number may change between reboots, so to properly identify
the instance we need more data. Name and ID reported here may mach ones
reported by SCSI device, but that is not really required by specs.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
sizeof(unsigned long) < sizeof(vm_paddr_t) on Book-E, which uses 36-bit
addressing. With this, a CCSR with a physical address above 4GB successfully
maps.
Sponsored by: Alex Perez/Inertial Computing
Since r289279 bufinit() uses mp_ncpus so adapt to what x86 does and
set this variable already in cpu_mp_setmaxid().
While at it, rename cpu_cpuid_prop() to cpu_portid_prop() as well as
the MD cpuid variable to portid to avoid confusion with the MI use
of "cpuid" and make some variable static/global in order to reduce
stack usage.
PR: 204685
the map has been created via bounce_bus_dmamem_alloc(). In that case
bus_dmamap_unload(9) typically isn't called during normal operation
but still should be during detach, cleanup from failed attach etc.
Submitted by: yongari
MFC after: 3 days
Extended memory here is "physical memory above 256MB".
"memsize" in the environment only grows to 256MB; "ememsize" is the entire
memory range. Extended memory shows up at physical address 0x90000000.
This allows for malta64 VMs to be created with > 256MB RAM, all the way
up to 2GB RAM.
Tested:
* qemu-devel package; qemu-system-mips64 -m 2048 (and -m 256 to test the
no-ememsize case.)
TODO:
* testing mips32 with > 256MB RAM.
Reviewed by: imp
At this time I cannot see a way to fix directory caching when it
has partial blocks in the buffer cache, due to the fact that the
syscall's uio_offset won't stay the same as the lblkno * NFS_DIRBLKSIZ
offset.
Reported by: bde
MFC after: 2 weeks
This was [re-]added in r127458 (apparently with disconnected history as well)
and never connected to the build.
It is no longer relevant for modern systems from the past 20 years.
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
All versions of getfsstat(3) are supposed to return the number of [o]statfs
structs in the array that was copied out.
Also fix missing bounds checking and signed comparison of unsigned types.
Submitted by: bde@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
map has been created via bounce_bus_dmamem_alloc(). Even for coherent
DMA - which bus_dmamem_alloc(9) typically is used for -, calling of
bus_dmamap_sync(9) isn't optional.
PR: 188899 (non-original problem)
MFC after: 3 days
Lower the payload data (IP) portion of the MTU from 0x10000 to
IP_MAXPACKET (0xFFFF) to avoid panicing the IP stack.
Sponsored by: EMC / Isilon Storage Division
This feature is disabled by default. To enable it, tune
hw.if_ntb.enable_xeon_watchdog to non-zero.
If enabled, writes an unused NTB register every second to demonstrate to
a hardware watchdog that the NTB device is still alive. Most machines
with NTB will not need this -- you know who you are.
Sponsored by: EMC / Isilon Storage Division
This change simplifies and unifies port adding/updating for loop and
fabric scanners. It also fixes problems with scanning restarts due to
concurrent port databases changes. It also fixes many cosmetic issues.
critical section.
uma_zalloc_arg()/uma_zalloc_free() may acquire a sleepable lock on the
zone. The malloc() family of functions may call uma_zalloc_arg() or
uma_zalloc_free().
The malloc(9) man page currently claims that free() will never sleep.
It also implies that the malloc() family of functions will not sleep
when called with M_NOWAIT. However, it is more correct to say that
these functions will not sleep indefinitely. Indeed, they may acquire
a sleepable lock. However, a developer may overlook this restriction
because the WITNESS check that catches attempts to call the malloc()
family of functions within a critical section is inconsistenly
applied.
This change clarifies the language of the malloc(9) man page to clarify
the restriction against calling the malloc() family of functions
while in a critical section or holding a spin lock. It also adds
KASSERTs at appropriate points to make the enforcement of this
restriction more consistent.
PR: 204633
Differential Revision: https://reviews.freebsd.org/D4197
Reviewed by: markj
Approved by: gnn (mentor)
Sponsored by: Juniper Networks
default and add a manual page for mlx5en. The mlx5 module contains
shared code for both infiniband and ethernet. The mlx5en module
contains specific code for ethernet functionality only. A mlx5ib
module is in the works for infiniband support.
Supported hardware:
- ConnectX-4: 10/20/25/40/50/56/100Gb/s speeds.
- ConnectX-4 LX: 10/25/40/50Gb/s speeds (low power consumption)
Refer to the mlx5en(4) manual page for a comprehensive list.
The team porting the mlx5 driver(s) to FreeBSD:
- Hans Petter Selasky <hselasky@freebsd.org>
- Oded Shanoon <odeds@mellanox.com>
- Meny Yossefi <menyy@mellanox.com>
- Shany Michaely <shanim@mellanox.com>
- Shahar Klein <shahark@mellanox.com>
- Daria Genzel <dariaz@mellanox.com>
- Mark Bloch <markb@mellanox.com>
Differential Revision: https://reviews.freebsd.org/D4163
Submitted by: Mark Block <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Reviewed by: gnn @
MFC after: 3 days
RX buffers from number of received packets.
Differential Revision: https://reviews.freebsd.org/D4178
Submitted by: Drew Gallatin <gallatin@freebsd.org>
Sponsored by: Mellanox Technologies
MFC after: 3 days
Setting sysctl dev....conf.hw_lro may fail if the net device lro is
turned off. Due to the nature of our sysctl handler we need to set the
values back to 0 and issue an error.
Differential Revision: https://reviews.freebsd.org/D4177
Submitted by: Shahar Klein <shahark@mellanox.com>
Sponsored by: Mellanox Technologies
MFC after: 3 days
This is useful in environments where system configuration is performed by
automated interaction with the system console, since unexpected witness
output makes such automation difficult. With this change, the new
debug.witness.output_channel sysctl allows one to specify that witness
output is to be printed to the kernel log (using log(9)) rather than the
console.
Reviewed by: cem, jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4183
stack, take into account the copy of rsi pushed between the breakpoint
trapframe and the dtrace_invop frame. Prior to r287644, this was covered
by the fact that sizeof(struct amd64_frame) was 24 rather than 16.
Reported by: smh
Analogously to r291040, in6_mc_get recurses on if_addr_lock if the
M_NOWAIT allocation fails. The fix is the same.
Suggested by: Andrey V. Elsukov
Reviewed by: jhb (ip4 version)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4138 (ip4 version)
When the M_NOWAIT allocation fails, we recurse the if_addr_lock trying
to clean up. Reorder the cleanup after dropping the if_addr_lock. The
obvious race is already possible between if_addmulti and IF_ADDR_WLOCK
above, so it must be ok.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: jhb
Found with: M_NOWAIT failure injection testing
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4138
trying to do a mount. Given the backtrace,
it appears that the crash occurred when smb_vc_create() failed and then
called smb_vc_put() with vcp->vc_iod == NULL. smb_vc_put() subsequently
called smb_vc_disconnect() with vcp->vc_iod == NULL, causing the crash.
This patch adds a check for vcp->vc_iod != NULL in smb_vc_disconnect() to
avoid the crash. It also fixes the case in smb_vc_create() where
kproc_create() fails so that it destroys the mutexes and sets
vcp->vc_iod == NULL before free()'ing the iod structure.
The person who reported the PR tested the patch, but was not able
to reproduce the crash with or without the patch.
PR: 201912
Reviewed by: jhb
MFC after: 2 weeks
Discard the unused rx_free_q. Instead, reuse inputed packets by putting
them back on the *pend* queue after reinitialization.
If tx or rx handlers are unavailable, free mbufs rather than leaking
them.
With this change, if_ntb can receive more than 100
(NTB_QP_DEF_NUM_ENTRIES) packets.
Sponsored by: EMC / Isilon Storage Division
32-bit BARs can only address memory mapped in the low 32 bits of
physical RAM. Expose this as a 'plimit' out parameter from
ntb_mw_get_range().
Fix if_ntb to allocate memory within this limit.
Sponsored by: EMC / Isilon Storage Division
