SPC-2 tells REPORT LUNS shall be supported by devices supporting LUNs other
then LUN 0. If we see LUN 0 disconnected, guess there may be others, and
so REPORT LUNS shall be supported.
MFC after: 1 month
usage of a function computing the checksum only over a part of the function.
Therefore introduce in6_cksum_partial() and implement in6_cksum() based
on that.
While there, ensure that the UDPLite packet contains at least enough bytes
to contain the header.
Reviewed by: kevlo
MFC after: 3 days
Previous logic was not differentiating disconnected LUNs and absent targets.
That made it to stop scan if LUN 0 was not found for any reason. That made
problematic, for example, using iSCSI targets declaring SPC-2 compliance and
having no LUN 0 configured.
The new logic continues sequential LUN scan if:
-- we have more configured LUNs that need recheck;
-- this LUN is connected and its SCSI version allows more LUNs;
-- this LUN is disconnected, its SCSI version allows more LUNs and we
guess they may be connected (we haven't scanned first 8 LUNs yet or
kern.cam.cam_srch_hi sysctl is set to scan more).
Reported by: trasz
MFC after: 1 month
the PAT MSR on guest exit/entry. This workaround was done for a beta release
of VMware Fusion 5 but is no longer needed in later versions.
All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT
in the VM exit and entry controls.
Discussed with: grehan
Instead requeue mbuf back to IPv4 protocol handler. If there is one extra IP-IP
encapsulation, it will be handled with tunneling interface. And thus proper
interface will be exposed into mbuf's rcvif. Also, tcpdump that listens on tunneling
interface will see packets in both directions.
Sponsored by: Yandex LLC
if_lagg(4) interfaces which were cloned in a vnet jail.
Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".
CR: D842
This is temporary commit to be merged to 10.
Other approach (like hash table) should be used
to store different masks.
PR: 194078
Submitted by: Rumen Telbizov
MFC after: 3 days
Some watchdog drivers (like ipmi) need to sleep while patting the watchdog.
See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK).
Submitted by: asomers
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 637548 on 2012/10/04
This is checked for in the zfs_snapshot_004_neg STF/ATF test (currently
still in projects/zfsd rather than head).
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:
- zfsvfs_create(): Check whether the objset name fits into
statfs.f_mntfromname, and return ENAMETOOLONG if not. Although
the filesystem can be unmounted via the umount(8) command, any
interface that relies on iterating on statfs (e.g. libzfs) will
fail to find the filesystem by its objset name, and thus assume
it's not mounted. This causes "zfs unmount", "zfs destroy",
etc. to fail on these filesystems, whether or not -f is passed.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 974872 on 2013/08/09
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socekt option and provice
the minimum coverage it accepts.
Reviewed by: kevlo
MFC after: 3 days
Also increase default for Tx queue get-list limit.
Too small limit results in TCP packets drops especiall when many
streams are running simultaneously.
Put list may be kept small enough since it is just a temporary
location if transmit function can't get Tx queue lock.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Required size of event queue is calculated now.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Remove trailing whitespaces and tabs.
Enclose value in return statements in parentheses.
Use tabs after #define.
Do not skip comparison with 0/NULL in boolean expressions.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Fix a problem where the blockback driver could run out of requests,
despite the fact that we allocate enough request and reqlist
structures to satisfy the maximum possible number of requests.
The problem was that we were sending responses back to the other
end (blockfront) before freeing resources. The Citrix Windows
driver is pretty agressive about queueing, and would queue more I/O
to us immediately after we sent responses to it. We would run into
a resource shortage and stall out I/O until we freed resources.
It isn't clear whether the request shortage condition was an
indirect cause of the I/O hangs we've been seeing between Windows
with the Citrix PV drivers and FreeBSD's blockback, but the above
problem is certainly a bug.
Sponsored by: Spectra Logic
Submitted by: ken
Reviewed by: royger
dev/xen/blkback/blkback.c:
- Break xbb_send_response() into two sub-functions,
xbb_queue_response() and xbb_push_responses().
Remove xbb_send_response(), because it is no longer
used.
- Adjust xbb_complete_reqlist() so that it calls the
two new functions, and holds the mutex around both
calls. The mutex insures that another context
can't come along and push responses before we've
freed our resources.
- Change xbb_release_reqlist() so that it requires
the mutex to be held instead of acquiring the mutex
itself. Both callers could easily hold the mutex
while calling it, and one really needs to hold the
mutex during the call.
- Add two new counters, accessible via sysctl
variables. The first one counts the number of
I/Os that are queued and waiting to be pushed
(reqs_queued_for_completion). The second one
(reqs_completed_with_error) counts the number of
requests we've completed with an error status.
Using realmem on PVH is not realiable, since in this case the realmem value
is computed from Maxmem, which contains the higher memory address found. Use
HYPERVISOR_start_info->nr_pages instead, which is set by the hypervisor and
contains the exact number of memory pages assigned to the domain.
Sponsored by: Citrix Systems R&D
This device is used by the user-space daemon that runs xenstore
(xenstored). It allows xenstored to map the xenstore memory page, and
reports the event channel xenstore is using.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstored_dev.c:
- Add the xenstored character device that's used to map the xenstore
memory into user-space, and to report the event channel used by
xenstore.
conf/files:
- Add the device to the build process.
Convert the xenstore user-space device (/dev/xen/xenstore) to a device
using the newbus interface. This allows us to make the device
initialization dependant on the initialization of xenstore itself in
the kernel.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstore.c:
- Convert to a newbus device, this removes the xs_dev_init function.
xen/xenstore/xenstore_internal.h:
- Remove xs_dev_init prototype.
dev/xen/xenstore/xenstore.c:
- Don't call xs_dev_init anymore, the device will attach itself when
xenstore is started.
The xenstore related devices in the kernel cannot be started until
xenstored is running, which will happen later in the Dom0 case. If
start_info_t doesn't contain a valid xenstore event channel, defer all
xenstore related devices attachment to later.
Sponsored by: Citrix Systems R&D
dev/xen/xenstore/xenstore.c:
- Prevent xenstore from trying to attach it's descendant devices if
xenstore is not initialized.
- Add a callback in the xenstore interrupt filter that will trigger
the plug of xenstore descendant devices on the first received
interrupt. This interrupt is generated when xenstored attaches to
the event channel, and serves as a notification that xenstored is
running.
Move xenstore related devices (xenstore.c and xenstore_dev.c) from
xen/xenstore to dev/xen/xenstore. This is just code motion, no
functional changes.
Sponsored by: Citrix Systems R&D
