Currently libclang_rt is not provided for cross-building and as such
is not connected to cross-tools. For building clang once in universe
it is likely that libclang_rt won't exist for the universe toolchain
but even if it did it would not support anything but the native arch.
So explicitly check for support before enabling h_raw.
MFC after: 1 week
Reviewed by: dim
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D16012
Allow attaching of multiple geli providers at once if they use same
passphrase and keyfiles.
This is helpful when the providers being attached are not used for boot,
and therefore the existing code to first try the cached password when
tasting the providers during boot does not apply.
Multiple providers with the same passphrase and keyfiles can be attached
at the same time during system start-up by adding the following to
rc.conf:
geli_groups="storage backup"
geli_storage_flags="-k /etc/geli/storage.keys"
geli_storage_devices="ada0 ada1"
geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
geli_backup_devices="ada2 ada3"
Reviewed by: wblock, delphij, jilles
Approved by: sobomax (src), bcr (doc)
Differential Revision: https://reviews.freebsd.org/D12644
Rather then combining hardlink creation for the geom(8) binary with
shared library build, move libraries to src/lib/geom so they are
built and installed normally. Create a common Makefile.classes
which is included by both lib/geom/Makefile and sbin/geom/Makefile
so the symlink and libraries stay in sync.
The relocation of libraries allows libraries to be build for 32-bit
compat. This also reduces the number of non-standard builds in
the system.
This commit is not sufficent to run a 32-bit /sbin/geom on a 64-bit
system out of the box as it will look in the wrong place for libraries
unless GEOM_LIBRARY_PATH is set appropriatly in the environment.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15360
This effectively reverts r335449 and changes the previous MK_LLD_IS_LD
to a MK_LLD_BOOTSTRAP check. If !TOOLS_PREFIX then these sources are
always built for llvm-objdump, lld, and llvm-cov. When TOOLS_PREFIX
is set then they are only needed if lld is being bootstrapped.
Reported by: dim
Pointyhat to: bdrewery
Sponsored by: Dell EMC
This makes it possible, through src.conf(5) settings, to select which
LLVM targets you want to build during buildworld. The current list is:
* (WITH|WITHOUT)_LLVM_TARGET_AARCH64
* (WITH|WITHOUT)_LLVM_TARGET_ARM
* (WITH|WITHOUT)_LLVM_TARGET_MIPS
* (WITH|WITHOUT)_LLVM_TARGET_POWERPC
* (WITH|WITHOUT)_LLVM_TARGET_SPARC
* (WITH|WITHOUT)_LLVM_TARGET_X86
To not influence anything right now, all of these are on by default, in
situations where clang is enabled.
Selectively turning a few targets off manually should work. Turning on
only one target should work too, even if that target does not correspond
to the build architecture. (In that case, LLVM_NATIVE_ARCH will not be
defined, and you can only use the resulting clang executable for
cross-compiling.)
I performed a few measurements on one of the FreeBSD.org reference
machines, building clang from scratch, with all targets enabled, and
with only the x86 target enabled. The latter was ~12% faster in real
time (on a 32-core box), and ~14% faster in user time. For a full
buildworld the difference will probably be less pronounced, though.
Reviewed by: bdrewery
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11077
lld always needs these DWARF sources, as well as other default and extra
tools. XDL seems to be the best fit list.
Remove MK_LLD_IS_LD check from SRCS_MIW which is now reduced to just a
few files for llvm-objdump.
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15915
MK_LLD is for the installed lld while MK_LLD_BOOTSTRAP is for the build
tool. For WITH_SYSTEM_LINKER it is necesarry to separate the logic of
these two. When building libllvm TOOLS_PREFIX will be defined and
MK_LLD_BOOTSTRAP should be checked instead.
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15837
or paths to see if they can be verified by MAC/veriexec.
Reviewed by: jtl, wblock
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8562
The nvlist_append_{bool,number,string,nvlist,descriptor}_array() functions
allows to dynamically extend array stored in the nvlist.
Submitted by: Mindaugas Rasiukevicius <rmind@netbsd.org>
All information which are need for those operations is already stored in
the cookie.
We decided not to bump libnv version because this API is not used yet in the
base system.
Reviewed by: pjd
The thr_new(2) syscall is called through libc stub. r154212 stopped
generating it for libthr but did not cleaned the unused remnants.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Aligns the build with the FreeBSD traditional approach to not build in
contrib/, and to track inter-dependencies between libraries.
With help from: bdrewery
Reviewed by: bdrewery, hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15648
The handbooks are not installed there anymore. While here, improve the
URLs markup a bit.
Reviewed by: allanjude@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15793
Fix the build of lib/libpmc and usr.sbin/pmc for gcc on amd64.
Reviewed by: mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15723
Qsort swap code aliases the sorted array elements to ints and longs in
order to do swap by machine words. Unfortunately this breaks with the
full code optimization, e.g. LTO.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83201 which seems to
reference code directly copied from libc/stdlib/qsort.c.
PR: 228780
Reported by: mliska@suse.cz
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15714
- add '-j' options to filter to enable converting native pmc
log format to json lines format to enable the use of scripts
and external tooling
% pmc filter -j pmc.log pmc.jsonl
- Record the tsc value in sampling interrupts as opposed to
recording nanotime when the sample is copied to a global log
in hardclock - potentially many milliseconds later.
- At initialize record the tsc_freq and the time of day to give
us an offset for translating the tsc values in callchain records
In the DESCRIPTION, put the more commonly used functions first in the
corresponding sentence, to help catch the eye.
Pull out the note about overlapping buffers to its own paragraph, as it
applies to all routines documented by this page.
Emphasize the potentially surprising strncpy(3) behavior of zero-filling the
remainder of a buffer larger than the source string.
Encourage strlcpy use; remove portability note about strlcpy(3). Adapting a
strlcpy-using code base to a platform that does not provide strlcpy in libc
is so trivial as to not be worth mentioning. (Just copy strlcpy.c out of
any BSD libc, or include and link the pre-packaged libbsd library on non-BSD
platforms.)
Likewise, expand the page's warning about ease of potential misuse to cover
all functions documented herein, and explicitly suggest using strlcpy most
of the time. The text was mostly cribbed from a similar suggestion in
gets(3).
Finally, document the remaining valid use of strncpy -- the rare
fixed-length record with no expectation of nul-termination.
Sponsored by: Dell EMC Isilon
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
By logging all threads and processes 'pmc filter'
can now filter on process or thread name, relieving
the user of the burden of determining which tid or
pid was which when the sample was taken.
% pmc filter -T if_io_tqg -P nginx pmc.log pmc-iflib.log
% pmc filter -x -T idle pmc.log pmc-noidle.log
Previously, libc.so would initialize its notion of the break address
using _end, a special symbol emitted by the static linker following
the bss section. Compatibility issues between lld and ld.bfd could
cause the wrong definition of _end (libc.so's definition rather than
that of the executable) to be used, breaking the brk()/sbrk()
interface.
Avoid this problem and future interoperability issues by simply not
relying on _end. Instead, modify the break() system call to return
the kernel's view of the current break address, and have libc
initialize its state using an extra syscall upon the first use of the
interface. As a side effect, this appears to fix brk()/sbrk() usage
in executables run with rtld direct exec, since the kernel and libc.so
no longer maintain separate views of the process' break address.
PR: 228574
Reviewed by: kib (previous version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D15663
