level socket option SCTP_GET_LOCAL_ADDRESSES in a getsockopt() call.
Thanks to Thomas Barabosch for reporting the issue which was found by
running syzkaller.
MFC after: 3 days
In all of the architectures we have today, we always use PAGE_SIZE.
While in theory one could define different things, none of the
current architectures do, even the ones that have transitioned from
32-bit to 64-bit like i386 and arm. Some ancient mips binaries on
other systems used 8k instead of 4k, but we don't support running
those and likely never will due to their age and obscurity.
Reviewed by: imp (who also contributed the commit message)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19280
When porting code once written for Linux we find not only uints but also ushort and ulong.
Provide central typedefs as part of the linuxkpi for those as well.
Reviewed by: hselasky, emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19405
The plls frequency are now correctly calculated in fractional mode
and integer mode.
While here add some debug printfs (disabled by default)
Tested with powerd on the little cluster on a RockPro64.
MFC after: 1 week
The send_packets() function was using ring->cur as index to scan
the transmit ring. This function may also set ring->cur ahead of
ring->head, in case no more slots are available. However, the function
also uses nm_ring_space() which looks at ring->head to check how many
slots are available. If ring->head and ring->cur are different, this
results in pkt-gen advancing ring->cur beyond ring->tail.
This patch fixes send_packets() (and similar source locations) to
use ring->head as a index, rather than using ring->cur.
MFC after: 1 week
Generate a fragmented packet with different header chains, to provoke
the incorrect behaviour of pf.
Without the fix this will trigger a panic.
Obtained from: Corentin Bayet, Nicolas Collignon, Luca Moro at Synacktiv
We mistakenly used the extoff value from the last packet to patch the
next_header field. If a malicious host sends a chain of fragmented packets
where the first packet and the final packet have different lengths or number of
extension headers we'd patch the next_header at the wrong offset.
This can potentially lead to panics or rule bypasses.
Security: CVE-2019-5597
Obtained from: OpenBSD
Reported by: Corentin Bayet, Nicolas Collignon, Luca Moro at Synacktiv
Firmware needed by petitboot, for example, GPU firmware, can be installed to
a partition in the flash filesystem. This driver exposes the full flash
given by the device tree, letting the user manage firmware, etc, from
FreeBSD.
To use the partitions provided by the flash module, the fdt_slicer module is
needed, but the module isn't needed for raw access, so there's no direct
dependency link in here.
MFC after: 2 weeks
For some reason this seems to be required on aarch64, but I can build armv7
from clean without needing this in the list. (The file does get included,
so the mystery is why armv7 works.)
The OPAL firmware only supports a finite number of in-flight asynchronous
operations. Rather than have each subsystem try to manage its own, use a
central management service to hand out tokens.
More work can be done to improve asynchronous behavior, such as funneling
things through a future OPAL heartbeat handler, but capabilities will be
added as needed.
Augment the existing consumers (i2c and sensors) to use this new API.
MFC after: 4 weeks
SGE_QSETS is an upper bound -- fewer qsets may be allocated depending on
the number of CPUs.
Reviewed by: markj, np, vangyzen
X-MFC-With: r333288
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17274
This change is made in the name of GNU patch compatibility. If GNU patch is
fed a zero-length patch, it will exit successfully with no output. This is
used in at least one port to date (comms/wsjtx), and we break on this usage.
It seems unlikely that anyone relies on patch(1) calling their completely
empty patch garbage and failing, and GNU compatibility is a plus if it helps
with porting, so make the switch.
Reported by: db
MFC after: 2 weeks
When the device is in attaching state, detach should return
EBUSY instead of success. In other case, there could be race
between attach and detach during the driver unloading.
If driver goes sleep and releases GIANT lock during attaching,
unloading module could start. In such case when attach continues
after module unload, page fault "supervisor read instruction,
page not present" occurred.
This patch works around the real issue, which is a locking
deficiency of the busses.
Submitted by: Rafal Kozik <rk@semihalf.com>
Reviewed by: imp
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D19375
geom_flashmap depends on a slicer being available in order to do any
work. On fdt platforms this is provided by fdt_slicer, but this needs
to be available. Often it's compiled into the kernel for platforms that
boot from the relevant media, but this is not always the case. Add the
file to the geom_flashmap module so that it can be used on platforms
which don't always need this functionality available.
Specifically, ccr(4) devices are also children of cxgbe nexus devices.
Rather than making assumptions about the child device's softc, walk
the list of ports from the nexus' softc to determine if a child is a
port in t4_child_location_str(). This fixes a panic when detaching a
ccr device.
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D19399
They have no effect, as with filesystem file descriptors.
This improves compatibility with some existing userspace code.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19330
This was actually the known good configuration we used before.
Single MSI-X configuration doesn't even work there on my tests, just due
to lack of documentation not sure whether by design or I am doing something
wrong.
PR: 233654
MFC after: 1 week
It is protected by MK_NLS. If it should really be optional then
it needs to be documented as such in share/mk/bsd.README and
.sinclude used where needed.
This fixes a regression from r335011.
PR: 232527
Submitted by: jarrod@downtools.com.au
Reported by: ktullavik@gmail.com
MFC after: 3 days
not supported.
According to SDM rev. 69 vol. 3, for PDPTE registers loads:
- when PAT is not supported, access to the PDPTE page is performed as
UC, see 4.9.1;
- when PAT is supported, the access is WB, see 4.9.2.
So potentially CPU might load stale memory as PDPTEs if both PAT and
self-snoop are not implemented. To be safe, add total local cache
flush to pmap_cold() before initial load of cr3, and flush PDPTE page
in pmap_pinit(), if PAT is not implemented.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19365
@cem removed references to pdwait4(2) (a nonexistent syscall) in
r320058.
This change removes references to pdwait4(2) and `CAP_PDWAIT` in
rights(4) to not mislead the user into thinking that pdwait4(2)/`CAP_PDWAIT` is
actually implemented in the stock FreeBSD kernel.
The goal of this functionality was to simplify monitoring/manipulating
processes started with `pdfork`, et al, and avoid races with waiting on pids.
The syscall was never completed though--just discussed on the capsicum mailing
list back in 2015:
https://lists.cam.ac.uk/pipermail/cl-capsicum-discuss/2015-May/msg00012.html
. That being said, there are members of the project (@rwatson, etc) who
have longterm goals to implement this syscall to better secure pdfork(2)
calls.
PR: 235871
Reviewed by: emaste
Discussed with: rwatson
Approved by: emaste (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18950
These are 4Gb/s and pretty old and slow now, so I see no reason to fight
for their performance over stability.
PR: 233654
MFC after: 1 week
Sponsored by: iXsystems, Inc.
There are some problem reports possibly related to the new driver use of
multiple interrupts on older cards. Hopefully this allow to workaround
them.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This allows us to limit the number of CPUs to use, e.g. to debug problems
seen when enabling multiple clusters.
Reviewed by: manu
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19404
The default handling showed the argument as hex. Add explicit handling so
we can show it as decimal, since that's how we show file descriptors
everywhere else.
Approved by: mjg (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19295
Linux generates the content of procfs files using a mechanism prefixed with
seq_*. This in particular came up with recent gcov import.
Sponsored by: The FreeBSD Foundation
r344162 exposed a bug in one of ixgbe's interrupt filters; they are never
supposed to return 0. Fix the interrupt filter to return the proper nonzero
return value.
Reported by: Oleg Ginzburg <olevole@olevole.ru>
MFC after: 1 week
Sponsored by: Intel Corporation
supporting older kernels. However, all supported versions of FreeBSD
have unmapped I/Os (as do several that have gone EOL), remove it. It's
unlikely the driver would work on the older kernels anyway at this
point.
supported in years. A number of changes have been made to the driver
that likely wouldn't work on those older versions that aren't properly
ifdef'd and it's project policy to GC such code once it is stale.
Replace long per-LUN queue of blocked commands, scanned on each command
completion and sometimes even twice, causing up to O(n^^2) processing cost,
by much shorter per-command blocked queues, scanned only when respective
command completes, and check only commands before the previous blocker,
reducing cost to O(n).
While there, unblock aborted commands to make them "complete" ASAP to be
removed from the OOA queue and so not waste time ordering other commands
against them. Aborted commands that were not sent to execution yet should
have no visible side effects, so this is safe and easy optimization now,
comparing to commands already in processing, which are a still pain.
Together those two optimizations should fix quite pathological case, when
due to backend slowness CTL accumulated many thousands of blocked requests,
partially aborted by initiator and so supposedly not even existing, but
still wasting CTL CPU time.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Marvell XHCI is in fact generic-xhci, so move the driver and
add the compatible string.
While here, get and enable the phy if the dtb provide one.
The xhci bindings state that phys should be in a 'phys' property but
Marvell DTS uses 'usb-phy', only add support for 'usb-phy' for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
This is a "fake" phy that handle regulator, clocks and reset gpio.
Only clock and regulator is supported for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
- Use strlcpy() with sizeof() instead of strncpy().
- Simplify initialization of TCP functions structures.
init_tcp_functions() was already called before the first call to
register a stack. Just inline the work in the SYSINIT and remove
the racy helper variable. Instead, KASSERT that the rw lock is
initialized when registering a stack.
- Protect the default stack via a direct pointer comparison.
The default stack uses the name "freebsd" instead of "default" so
this protection wasn't working for the default stack anyway.
Reviewed by: rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19152
- Explicitly mention the #bhyve group on Phabricator.
- Request reviews of the userland components (libvmmapi, bhyve,
bhyvectl, and bhyveload).
Reviewed by: imp, rgrimes
Differential Revision: https://reviews.freebsd.org/D17848
