Fix error in extent_try_coalesce_impl(), which could cause abort
to happen when trying to coalesce extents backwards. The error could
happen because of how extent_before_get() function works. This function
gets address of previous extent, by subtracting page size from current
extent address. If current extent is located at PAGE_SIZE offset, this
address resolved to 0x0000. An assertion in rtree_leaf_elm_lookup
then caused the running program to abort.
This problem was discovered when trying to build world on 32-bit
machines with ASLR and PIE enabled. The problem was encountered
on armv7 and i386 machines, but most likely other 32-bit
architectures are affected as well.
While this patch fixes one problem with buildworld on 32-bit platforms
with ASLR, the build still fails, however it happens much later
and due to lack of memory.
The change is aligned with accepted fix in the upstream Jemalloc
repository (https://github.com/jemalloc/jemalloc/pull/1973).
As it doesn't apply on top of Jemalloc tree, its updated version
was eventually merged: https://github.com/jemalloc/jemalloc/pull/2003
PR: 249937
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D27025
Apply upstream fix 08968baec1122a58bb90d8f97ad948a75f8a5d69:
Fix error cases when udp-connect is set and send() returns an error
Obtained from: unbound git
MFC after: 3 days
Sync libarchive with vendor.
Vendor changes:
Issue #1461: Unbreak build without lzma
Issue #1462: warc reader: Fix build with gcc11
Issue #1463: Fix code compatibility in test_archive_read_support.c
Issue #1464: Use built-in strnlen on platforms where not available
Issue #1465: warc reader: fix undefined behaviour in deconst() function
MFC after: 3 days
X-MFC-With: 368234
Vendor changes:
Issue #1461: Unbreak build without lzma
Issue #1462: warc reader: Fix build with gcc11
Issue #1463: Fix code compatibility in test_archive_read_support.c
Issue #1464: Use built-in strnlen on platforms where not available
Issue #1465: warc reader: fix undefined behaviour in deconst() function
[RISCV] Set __GCC_HAVE_SYNC_COMPARE_AND_SWAP_x defines
The RISCV target did not set the GCC atomic compare and swap defines,
unlike other targets. This broke builds for things like glib on
RISCV.
Patch by Kristof Provost (kprovost)
Differential Revision: https://reviews.llvm.org/D91784
This should fix building glib20 on RISC-V and unblock a number of
dependent ports.
Requested by: kp
MFC after: 3 days
This is addressing cases such as fts_read(3) encountering an [EIO]
from fchdir(2) when FTS_NOCHDIR is not set. That would otherwise be
seen as a successful traversal in some of these cases while silently
discarding expected work.
As noted in r264201, fts_read() does not set errno to 0 on a successful
EOF so it needs to be set before calling it. Otherwise we might see
a random error from one of the iterations.
gzip is ignoring most errors and could be improved separately.
Reviewed by: vangyzen
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D27184
Part of the libregex functionality leaked into the tests it shares with
the standard regex(3). Introduce a P flag to set the REG_POSIX cflag to
indicate that libc regex should effectively do nothing while libregex should
specifically run it in non-extended mode.
This unbreaks the libc/regex test run.
Reported by: Jenkins
This is the last of the needed GNU expressions before we can unleash bsdgrep
by default. \b is effectively an agnostic equivalent of \< and \>, while
\B will match every space that isn't making a transition from
nonchar -> char or char -> nonchar.
Implement computeHostNumHardwareThreads() for FreeBSD
This retrieves CPU affinity via FreeBSD's cpuset(2) API, and makes
LLVM respect affinity settings configured by the user via the
cpuset(1) command.
In particular, this allows to reduce the number of threads used on
machines with high core counts, which can interact badly with
parallelized build systems. This is particularly noticable with lld,
which spawns lots of threads even for linking e.g. hello_world!
This fix is related to PR48193, but does not adress the more
fundamental problem, which is that LLVM by default grabs as many CPUs
and/or threads as possible.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D92271
Originally by: mjg
MFC after: 1 week
landed upstream:
For llvm's internal function which retrieves the number of available
"hardware threads", use cpuset_getaffinity(2) on FreeBSD, so it will
honor processor sets configured by the cpuset(1) command.
This should make it possible to avoid e.g. lld creating a huge number of
threads on a machine with many cores, even for linking simple programs.
This will also be submitted upstream.
Submitted by: mjg
Update libarchive to 3.5.0
Relevant vendor changes:
Issue #1258: add archive_read_support_filter_by_code()
PR #1347: mtree digest reader support
Issue #1381: skip hardlinks pointing to itself on extraction
PR #1387: fix writing of cpio archives with hardlinks without file type
PR #1388: fix rdev field in cpio format for device nodes
PR #1389: completed support for UTF-8 encoding conversion
PR #1405: more formats in archive_read_support_format_by_code()
PR #1408: fix uninitialized size in rar5_read_data
PR #1409: system extended attribute support
PR #1435: support for decompression of symbolic links in zipx archives
Issue #1456: memory leak after unsuccessful archive_write_open_filename
MFC after: 1 week
Check label's ranges for address we want to translate if a CU doesn't
have usable DW_AT_range or DW_AT_low_pc.
Use more appropriate names: "struct CU" -> "struct range"
Developed as part of upstream ELF Tool Chain bug report
https://sourceforge.net/p/elftoolchain/tickets/552/ although this does
not address the specific case reported there.
Submitted by: Tiger Gao <tig@freebsdfoundation.org>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D23782
Instead of using a simple global++ as the data race, with this change we
perform the increment by loading the global, delaying for a bit and then
storing back the incremented value. If I move the increment outside of the
mutex protected range, I can now see the data race with only 100 iterations
on amd64 in almost all cases. Before this change such a racy test almost
always passed with < 100,000 iterations and only reliably failed with the
current limit of 10 million.
I noticed this poorly written test because the mutex:mutex{2,3} and
timedmutex:mutex{2,3} tests were always timing out on our CheriBSD Jenkins.
Writing good concurrency tests is hard so I won't attempt to do so, but this
change should make the test more likely to fail if pthread_mutex_lock is not
implemented correctly while also significantly reducing the time it takes to
run these four tests. It will also reduce the time it takes for QEMU RISC-V
testsuite runs by almost 40 minutes (out of currently 7 hours).
Reviewed By: brooks, ngie
Differential Revision: https://reviews.freebsd.org/D26473
-fstack-clash-protection was added in Clang commit e67cbac81211 but was
enabled only on Linux. It should work fine on FreeBSD as well, so
enable it.
To be discussed and upstreamed with a test. The OS test should probably
just be removed.
Reviewed by: dim
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27366
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o More code cleanup and refactoring.
o More unit tests
MFC after: 1 week
"hardware threads", use cpuset_getaffinity(2) on FreeBSD, so it will
honor processor sets configured by the cpuset(1) command.
This should make it possible to avoid e.g. lld creating a huge number of
threads on a machine with many cores, even for linking simple programs.
This will also be submitted upstream.
Submitted by: mjg
MFC after: 1 week
make it create the temporary file in the same directory as the source
file by default, instead of always using $TMPDIR or /tmp. If creating
that file fails because the directory is not writable, also fallback to
$TMPDIR or /tmp.
This has also been submitted upstream as:
https://sourceforge.net/p/elftoolchain/tickets/597/
Reported by: cem
PR: 250872
MFC after: 2 weeks
[ELF] Don't consider SHF_ALLOC ".debug*" sections debug sections
Fixes PR48071
* The Rust compiler produces SHF_ALLOC `.debug_gdb_scripts` (which
normally does not have the flag)
* `.debug_gdb_scripts` sections are removed from `inputSections` due
to --strip-debug/--strip-all
* When processing --gc-sections, pieces of a SHF_MERGE section can be
marked live separately
`=>` segfault when marking liveness of a `.debug_gdb_scripts` which
is not split into pieces (because it is not in `inputSections`)
This patch circumvents the problem by not treating SHF_ALLOC
".debug*" as debug sections (to prevent --strip-debug's stripping)
(which is still useful on its own).
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D91291
This should fix lld segfaulting when linking the rust-based parts of the
devel/py-maturin port.
Reported by: Nick Venenga <nijave@gmail.com>
PR: 250783
MFC after: 3 days
[PowerPC] Skip combining (uint_to_fp x) if x is not simple type
Current powerpc64le backend hits
```
Combining: t7: f64 = uint_to_fp t6
llc: llvm-project/llvm/include/llvm/CodeGen/ValueTypes.h:291:
llvm::MVT llvm::EVT::getSimpleVT() const: Assertion `isSimple() &&
"Expected a SimpleValueType!"' failed.
```
This patch fixes it by skipping combination if `t6` is not simple
type.
Fixed https://bugs.llvm.org/show_bug.cgi?id=47660.
Reviewed By: #powerpc, steven.zhang
Differential Revision: https://reviews.llvm.org/D88388
This should fix the llvm assertion mentioned above when building the
following ports for powerpc64le:
* audio/traverso
* databases/percona57-pam-for-mysql
* databases/percona57-server
* emulators/citra
* emulators/citra-qt5
* games/7kaa
* graphics/dia
* graphics/mandelbulber
* graphics/pcl-pointclouds
* net-p2p/libtorrent-rasterbar
* textproc/htmldoc
Requested by: pkubaj
MFC after: 3 days
Lots of new unit-tests increase code coverage.
Lots of refactoring, cleanup and simlpification to reduce
code size.
Fixes for Bug 223564 and 245807
Updates to dirdeps.mk and meta2deps.py
Follow-up to r367323 by re-adding static to a number of the functions
copied from elftc's libelftc_vstr.c. This was requested by upstream.
PR: 250702
MFC after: 3 days
This updates the private copy of libelftc_dem_gnu3.c in libcxxrt with
the most recent version from upstream r3877. Similar to r367322, this
fixes a number of possible assertions, and allows it to correctly
demangle several names that it could not handle before.
PR: 250702
MFC after: 3 days
Incorporate fixes from Dimitry Andric:
- Use a BUFFER_GROW() macro to avoid rounding errors in capacity
calculations.
- Fix a bug introduced in [r3531].
- Fix handling of nested template parameters.
Ticket: #581
This should fix a number of assertions on elftoolchain's cxxfilt, and
allow it to correctly demangle several names that it could not handle
before.
Obtained from: https://sourceforge.net/p/elftoolchain/code/3877/
PR: 250702
MFC after: 3 days
__FreeBSD__ is defined by the compiler derived from the triple. When
building FreeBSD 11 on a FreeBSD 12 with a CROSS_TOOLCHAIN=llvm10,
__FreeBSD__ was set to 12 when building lib32 (for some reason no triple
is being passed which seems to mean that we're taking default values
from the build system). This in turn meant we end up with a double
decleration of union semun which is a build error.
Reviewed by: gshapiro, dim
Differential Revision: https://reviews.freebsd.org/D26902
libjail is pretty small, so it makes for a good proof of concept demonstrating
how a system library can be wrapped to create a loadable Lua module for flua.
* Introduce 3lua section for man pages
* Add libjail module
Reviewed by: kevans, manpages
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26080
GNU and Oracle libelf implementations added support for section
compression, intended to reduce the size of DWARF debug info (which
might be an order of magnitude larger than the code).
There are two compressed ELF section formats:
1. Old GNU - sections are renmaed to start with 'z'. Section contains
a magic number, uncompressed size, and compressed data.
2. Oracle and New GNU - compressed sections use the SHF_COMPRESSED flag.
The compression header contains the compression type, uncompressed
size, and uncompressed alignment.
The second style is preferred and this change implements only that one.
Submitted by: Tiger Gao <tig@FreeBSDFoundation.org>
Reviewed by: markj
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24566
When compiling this for mips32 on gcc-6.x, we'd hit issues where we
don't have 64 bit atomics on mips32.
gcc implements this using libatomic, which we don't currently include
in our freebsd-gcc compiler packages.
So for now add this work around so mips32 works. It's also fine for
mips64. We can fix this later once we get libatomic included.
Approved by: dim
Differential Revision: https://reviews.freebsd.org/D26774
This release contains some minor bugfixes; notably:
- 2x minor Makefile fixes (not used in base)
- Long brackets with a huge number of '=' overflow some internal buffer
arithmetic.
- Joining an upvalue with itself can cause a use-after-free crash.
See here for examples: http://www.lua.org/bugs.html#5.3.5
MFC after: 2 weeks
This fixes a "suggested parens" compile warning-into-error
that shows up on gcc-6.4.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D26789
[clang][Sema] Fix PR47676: Handle dependent AltiVec C-style cast
Fix premature decision in the presence of type-dependent expression
operands on whether AltiVec vector initializations from single
expressions are "splat" operations.
Verify that the instantiation is able to determine the correct cast
semantics for both the scalar type and the vector type case.
Note that, because the change only affects the single-expression case
(and the target type is an AltiVec-style vector type), the
replacement of a parenthesized list with a parenthesized expression
does not change the semantics of the program in a program-observable
manner.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D88526
This should fix 'Assertion failed: (isScalarType()), function
getScalarTypeKind, file /usr/src/contrib/llvm-project/clang/lib/AST
/Type.cpp, line 2146', when building the graphics/opencv-core port for
powerpc64le.
Requested by: pkubaj
MFC after: 4 weeks
X-MFC-With: r364284
As of r363471, tmpfs is included in all GENERIC kernel configs. This
results in a warning being emitted for each call to kldload(8):
module_register: cannot register tmpfs from tmpfs.ko; already loaded from kernel
Check for the presence of the module via kldstat first to quiet this
warning.
Reviewed by: asomers, arichardson
Differential Revision: https://reviews.freebsd.org/D26632
An old it_value of {4,3} is valid. Allow it.
Reviewed by: bdrewery
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26445
zgrep should exit with success when given multiple files and the
pattern is found in at least one file. Prior to this change,
it would exit with success only if the pattern was found in _every_ file.
Reviewed by: dab ngie
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26616
This version incorporates many fixes in particular a fix for vi -w
Another approach was proposed to merge those fixes (see review), I find
it easier to track changes if we keep importing snapshot on regular
basis
PR: 241985
Reported by: fernape
Differential Revision: https://reviews.freebsd.org/D26158
I've submitted this patch upstream, so apply this to contrib/ until a new
version containing this change has been released.
Reviewed By: jkim
Differential Revision: https://reviews.freebsd.org/D26505
When matching a regex with ^, it would attempt to access
gototab[NSTATES][NCHARS+2], and therefore access the state for the \002
character instead. This change is required to run awk under CHERI (with
sub-object bounds) and when running with UBSan instrumentation.
This was committed upstream as cbf924342b
Found by: CHERI (with subobject bounds enabled)
Obtained from: CheriBSD
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D26509
If Unwind_Backtrace is broken, ctx.n will still contain ~0, and we will
return that which poor behavior for the user, so return 0 instead.
We could document ~0 to be an error, but that would deviate from the
Linux behavior which is not desirable. Noted by Poul-Henning Kamp
PR: 209842
This absolute include causes a build failure on Linux for me:
.../cheri/freebsd/contrib/nvi/cl/../common/common.h:10:10: fatal error: '/usr/include/db.h' file not found
This change patches the file to use #include <db.h> instead until a
solution has been found upstream. See also https://github.com/lichray/nvi2/issues/69
Reviewed By: bapt
Differential Revision: https://reviews.freebsd.org/D26480
[X86] Place new constant node in topological order in
X86DAGToDAGISel::matchBitExtract
Fixes PR47482
This should fix 'Assertion failed: (Op->getNodeId() != -1 && "Node has
already selected predecessor node"), function DoInstructionSelection,
file
/usr/src/contrib/llvm-project/llvm/lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp,
line 1149' when compiling part of the project_painter project, while
targeting the bdver2 (or higher) CPU.
Reported by: jkim
MFC after: 6 weeks
X-MFC-With: r364284
[Sema] Introduce BuiltinAttr, per-declaration builtin-ness
Instead of relying on whether a certain identifier is a builtin,
introduce BuiltinAttr to specify a declaration as having builtin
semantics.
This fixes incompatible redeclarations of builtins, as reverting the
identifier as being builtin due to one incompatible redeclaration
would have broken rest of the builtin calls.
Mostly-compatible redeclarations of builtins also no longer have
builtin semantics. They don't call the builtin nor inherit their
attributes.
A long-standing FIXME regarding builtins inside a namespace enclosed
in extern "C" not being recognized is also addressed.
Due to the more correct handling attributes for builtin functions are
added in more places, resulting in more useful warnings.
Tests are updated to reflect that.
Intrinsics without an inline definition in intrin.h had `inline` and
`static` removed as they had no effect and caused them to no longer
be recognized as builtins otherwise.
A pthread_create() related test is XFAIL-ed, as it relied on it being
recognized as a builtin based on its name.
The builtin declaration syntax is too restrictive and doesn't allow
custom structs, function pointers, etc.
It seems to be the only case and fixing this would require reworking
the current builtin syntax, so this seems acceptable.
Fixes PR45410.
Reviewed By: rsmith, yutsumi
Differential Revision: https://reviews.llvm.org/D77491
This should fix 'Assertion failed: (i < getNumParams() && "Illegal
param #"), function getParamDecl, file
/usr/src/contrib/llvm-project/clang/include/clang/AST/Decl.h, line 2430'
when building the graphics/pgplot port.
Note that there may also have been other ports which triggered this
assertion, if they redeclare standard functions with incompatible
arguments.
Reported by: zeising
MFC after: 6 weeks
X-MFC-With: r364284
Teach clang that powerpc64le-*-freebsd* is a valid triple.
This is already in upstream clang, but was too late for llvm 11.0.0.
Apply it directly for now, until it can be backported to llvm 11.0.1.
See upstream https://reviews.llvm.org/D73425 for details.
Reviewed by: dim (upstream version), emaste
Approved by: emaste
Differential Revision: https://reviews.freebsd.org/D26400
Two more cases of explicitly marking globals for internal linkage where they
need not be shared. Committed upstream as of a38e62314a1f.
MFC after: 1 week
got_sigalrm is a global with external linkage and must therefore have a
previous extern declaration. There's no reason to maintain the status quo
there, so just make it static.
The result var is unused.
This part of the test has not been upstreamed, presumably because it exists
solely for sem_clockwait_np. We should perhaps consider moving it into its
own test file outside of ^/contrib/netbsd-tests, but this can happen later.
MFC after: 1 week
v1.17 of this file included a fix that I just submitted upstream to fix a
warning about prevent_inline with external linkage not having been
previously declared.
MFC after: 1 week
[X86] SSE4_A should only imply SSE3 not SSSE3 in the frontend.
SSE4_1 and SSE4_2 due imply SSSE3. So I guess I got confused when
switching the code to being table based in D83273.
Fixes PR47464
This should fix builds with -march=amdfam10 emitting SSSE3 instructions
such as pshufb, which lead to programs crashing with SIGILL on such
processors.
Reported by: avg
MFC after: 6 weeks
X-MFC-With: r364284
Main changes:
* Vim-style expandtab option
* Provides Turkish translation
* Backspace now deletes \ rather than being escaped
* T during motion commands is now VI-compatible
* Encoding related fixes, such as UTF-8 detection
* Fixed a number of memory management issues
MFC after: 3 weeks
Add <stdarg.h> include to kmp_os.h, to get the va_list type, required
after cde8f4c164a2. Sort system includes, while here.
The original merged commit works fine by itself on head, but fails to
compile on stable branches because stdarg.h is not implicitly pulled in.
MFC after: immediately, to fix failing builds on stable/{11,12}
For historical reasons, defining MALLOC_PRODUCTION in /etc/make.conf has
been used to turn off potentially expensive debug checks and statistics
gathering in the implementation of malloc(3).
It seems more consistent to turn this into a regular src.conf(5) option,
e.g. WITH_MALLOC_PRODUCTION / WITHOUT_MALLOC_PRODUCTION. This can then
be toggled similar to any other source build option, and turned on or
off by default for e.g. stable branches.
Reviewed by: imp, #manpages
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26337
Lots of code refactoring, simplification and cleanup.
Lots of new unit-tests providing much higher code coverage.
All courtesy of rillig at netbsd.
Other significant changes:
o new read-only variable .SHELL which provides the path of the shell
used to run scripts (as defined by the .SHELL target).
o variable parsing detects more errors.
o new debug option -dl: LINT mode, does the equivalent of := for all
variable assignments so that file and line number are reported for
variable parse errors.
Eliminate the sizing template parameter N from CoalescingBitVector
Since the parameter is not used anywhere, and the default size of 16
apparently causes PR47359, remove it. This ensures that IntervalMap
will automatically determine the optimal size, using its NodeSizer
struct.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D87044
This should fix 'Assertion failed: (Elements + Grow <= Nodes * Capacity
&& "Not enough room for elements"), function distribute, file
/usr/src/contrib/llvm-project/llvm/lib/Support/IntervalMap.cpp, line
123.' when building the x11-toolkits/py-wxPython40 port on a i386 host.
Reported by: zeising
MFC after: 6 weeks
X-MFC-With: r364284
We need to define the LUA_FLOAT_INT64 macro even if we don't use it (copied
from stand/luaconf.h). While touching luaconf.h.dist also sync it with the
the 5.3.5 release version (matches the one in lib/liblua).
Reviewed By: kevans
Differential Revision: https://reviews.freebsd.org/D25977
There have been several mentions on our mailing lists about missing
atomic functions in our system libraries (e.g. __atomic_load_8 and
friends), and recently I saw __bswapdi2 and __bswapsi2 mentioned too.
To address this, add implementations for the functions from compiler-rt
to the system compiler support libraries, e.g. libcompiler_rt.a and and
libgcc_s.so.
This also needs a small fixup in compiler-rt's atomic.c, to ensure that
32-bit mips can build correctly.
Bump __FreeBSD_version to make it easier for port maintainers to detect
when these functions were added.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26159
Move special va_list handling to kmp_os.h
Instead of copying and pasting the same #ifdef expressions in
multiple places, define a type and a pair of macros in kmp_os.h, to
handle whether va_list is pointer-like or not:
* kmp_va_list is the type to use for __kmp_fork_call()
* kmp_va_deref() dereferences a va_list, if necessary
* kmp_va_addr_of() takes the address of a va_list, if necessary
Also add FreeBSD to the list of OSes that has a non pointer-like
va_list. This can now be easily extended to other OSes too.
Reviewed By: AndreyChurbanov
Differential Revision: https://reviews.llvm.org/D86397
This should enable building of LLVM's OpenMP on AArch64. Addition to
share/mk will follow in a subsequent commit.
PR: 248864
MFC after: 2 weeks
mtree(5) and mtree(8) come from different contrib sources. The former
already had an xref to the latter, but not the other way around.
MFC after: 1 week
Instantiate Error in Target::GetEntryPointAddress() only when
necessary
When Target::GetEntryPointAddress() calls
exe_module->GetObjectFile()->GetEntryPointAddress(), and the returned
entry_addr is valid, it can immediately be returned.
However, just before that, an llvm::Error value has been setup, but
in this case it is not consumed before returning, like is done
further below in the function.
In https://bugs.freebsd.org/248745 we got a bug report for this,
where a very simple test case aborts and dumps core:
* thread #1, name = 'testcase', stop reason = breakpoint 1.1
frame #0: 0x00000000002018d4 testcase`main(argc=1, argv=0x00007fffffffea18) at testcase.c:3:5
1 int main(int argc, char *argv[])
2 {
-> 3 return 0;
4 }
(lldb) p argc
Program aborted due to an unhandled Error:
Error value was Success. (Note: Success values must still be checked prior to being destroyed).
Thread 1 received signal SIGABRT, Aborted.
thr_kill () at thr_kill.S:3
3 thr_kill.S: No such file or directory.
(gdb) bt
#0 thr_kill () at thr_kill.S:3
#1 0x00000008049a0004 in __raise (s=6) at /usr/src/lib/libc/gen/raise.c:52
#2 0x0000000804916229 in abort () at /usr/src/lib/libc/stdlib/abort.c:67
#3 0x000000000451b5f5 in fatalUncheckedError () at /usr/src/contrib/llvm-project/llvm/lib/Support/Error.cpp:112
#4 0x00000000019cf008 in GetEntryPointAddress () at /usr/src/contrib/llvm-project/llvm/include/llvm/Support/Error.h:267
#5 0x0000000001bccbd8 in ConstructorSetup () at /usr/src/contrib/llvm-project/lldb/source/Target/ThreadPlanCallFunction.cpp:67
#6 0x0000000001bcd2c0 in ThreadPlanCallFunction () at /usr/src/contrib/llvm-project/lldb/source/Target/ThreadPlanCallFunction.cpp:114
#7 0x00000000020076d4 in InferiorCallMmap () at /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/Utility/InferiorCallPOSIX.cpp:97
#8 0x0000000001f4be33 in DoAllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/FreeBSD/ProcessFreeBSD.cpp:604
#9 0x0000000001fe51b9 in AllocatePage () at /usr/src/contrib/llvm-project/lldb/source/Target/Memory.cpp:347
#10 0x0000000001fe5385 in AllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Target/Memory.cpp:383
#11 0x0000000001974da2 in AllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Target/Process.cpp:2301
#12 CanJIT () at /usr/src/contrib/llvm-project/lldb/source/Target/Process.cpp:2331
#13 0x0000000001a1bf3d in Evaluate () at /usr/src/contrib/llvm-project/lldb/source/Expression/UserExpression.cpp:190
#14 0x00000000019ce7a2 in EvaluateExpression () at /usr/src/contrib/llvm-project/lldb/source/Target/Target.cpp:2372
#15 0x0000000001ad784c in EvaluateExpression () at /usr/src/contrib/llvm-project/lldb/source/Commands/CommandObjectExpression.cpp:414
#16 0x0000000001ad86ae in DoExecute () at /usr/src/contrib/llvm-project/lldb/source/Commands/CommandObjectExpression.cpp:646
#17 0x0000000001a5e3ed in Execute () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandObject.cpp:1003
#18 0x0000000001a6c4a3 in HandleCommand () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:1762
#19 0x0000000001a6f98c in IOHandlerInputComplete () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:2760
#20 0x0000000001a90b08 in Run () at /usr/src/contrib/llvm-project/lldb/source/Core/IOHandler.cpp:548
#21 0x00000000019a6c6a in ExecuteIOHandlers () at /usr/src/contrib/llvm-project/lldb/source/Core/Debugger.cpp:903
#22 0x0000000001a70337 in RunCommandInterpreter () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:2946
#23 0x0000000001d9d812 in RunCommandInterpreter () at /usr/src/contrib/llvm-project/lldb/source/API/SBDebugger.cpp:1169
#24 0x0000000001918be8 in MainLoop () at /usr/src/contrib/llvm-project/lldb/tools/driver/Driver.cpp:675
#25 0x000000000191a114 in main () at /usr/src/contrib/llvm-project/lldb/tools/driver/Driver.cpp:890
Fix the incorrect error catch by only instantiating an Error object
if it is necessary.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D86355
This should fix lldb aborting as described in the scenario above.
Reported by: dmgk
PR: 248745
[PowerPC] Fix a typo for InstAlias of mfsprg
D77531 has a type for mfsprg, it should be mtsprg. This patch is to
fix this typo.
This should fix booting powerpc64 kernels, after LLVM 11 was imported.
PR: 248763
resolution for <https://bugs.llvm.org/show_bug.cgi?id=47181>.
The cache implementation depends on dl_iterate_phdr(3) ensuring that its
callbacks are not called simultaneously for multiple threads, but that
is only the case for the dl_iterate_phdr() implementation in rtld.
In a statically linked executable, libc's dl_iterate_phdr() is used,
which does no such locking. If multiple threads then call into the
unwinder at the same time, it is possible to trigger a segfault.
In particular, the statically linked lld which is built during the
cross-tools stage can segfault in this way, because it starts multiple
worker threads that can exit in parallel. Since our pthread_exit(3)
invokes the unwinder, it will therefore call into it in parallel too.
llvm: Default to -mno-relax on RISC-V
Compiling on a RISC-V system fails with 'relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax'.
Our default linker (ld.lld) doesn't support relaxation, so default to
no-relax so we don't generate object files the linker can't handle.
Reviewed by: mhorne
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25210
lldb: use lua as the default script language
In the FreeBSD base system we do not have Python support in lldb, but
will have Lua support. Make Lua the default.
This needs to be made into a configure-time option; that is being
discussed upstream and will appear in a future lldb import. For now
carry this change as a tiny patch to our copy of lldb.
[PowerPC] enable atomic.c in compiler_rt and do not check and forces
lock/lock_free decisions in compiled time
Summary:
Enables atomic.c in compiler_rt and forces clang to not emit a call for runtime
decision about lock/lock_free. At compiling time, if clang can't decide if
atomic operation can be lock free, it emits calls to external functions like
`__atomic_is_lock_free`, `__c11_atomic_is_lock_free` and
`__atomic_always_lock_free`, postponing decision to a runtime check. According
to LLVM code documentation, the mechanism exists due to differences between
x86_64 processors that can't be decided at runtime.
On PowerPC and PowerPCSPE (32 bits), we already know in advance it can't be lock
free, so we force the decision at compile time and avoid having to implement it
in an external library.
This patch was made after 32 bit users testing the PowePC32 bit ISO reported
llvm could not be compiled with in-base llvm due to `__atomic_load8` not
implemented.
Submitted by: alfredo.junior_eldorado.org.br
Reviewed by: jhibbits, dim
Differential Revision: https://reviews.freebsd.org/D22549
Fix LLVM libunwnwind _Unwind_Backtrace symbol version for ARM.
In original GNU libgcc, _Unwind_Backtrace is published with GCC_3.3 version
for all architectures but ARM. For ARM should be publishes with GCC_4.3.0
version. This was originally omitted in r255095, fixed in r318024 and omitted
aging in LLVM libunwind implementation in r354347.
For ARM _Unwind_Backtrace should be published as default with GCC_4.3.0
version , (because this is right original version) and again as
normal(not-default) with GCC_3.3 version (to maintain ABI compatibility
compiled/linked with wrong pre r318024 libgcc)
PR: 233664
Fix llvm-libunwind userspace build on ARM
GCC's libgcc exports a few ARM-specific symbols for ARM EABI, AEABI, or
EHABI or whatever it's called. Export the same ones from LLVM-libunwind's
libgcc_s, on ARM. As part of this, convert libgcc_s from a direct
Version.map to one constructed from component Symbol.map files. This allows
the ARM-specific Symbol.map to be included only on ARM.
Fix ARM-only oddities in struct name/aliases in LLVM-libunwind to match
non-ARM definitions and ARM-specific expectations in libcxxrt /
libcompiler_rt.
No functional change intended for non-ARM architectures.
This commit does not actually flip the switch for ARM defaults from libgcc
to llvm-libunwind, but makes it possible (to compile, anyway).
lldb: shorten thread names to make logs easier to follow
lldb prepends the thread name to log entries, and the existing thread
name for the FreeBSD ProcessMonitor thread was longer than the kernel's
supported thread name length, and so was truncated. This made logs hard
to read, as the truncated thread name ran into the log message. Shorten
"lldb.process.freebsd.operation" to just "freebsd.op" so that logs are
more readable.
(Upstreaming to lldb still to be done).
Apply a workaround to be able to build clang 8.0.0 headers with clang
3.4.1, which is still in the stable/10 branch.
It looks like clang 3.4.1 implements static_asserts by instantiating a
temporary static object, and if those are in an anonymous union, it
results in "error: anonymous union can only contain non-static data
members".
To work around this implementation limitation, move the static_asserts
in question out of the anonymous unions.
This should make building the latest stable/11 from stable/10 possible
again.
Reported by: Mike Tancsa <mike@sentex.net>
Put in a temporary workaround for what is likely a gcc 6 bug (it does
not occur with gcc 7 or later). This should prevent the following error
from breaking the head-amd64-gcc CI builds:
In file included from /workspace/src/contrib/llvm/tools/lldb/source/API/SBMemoryRegionInfo.cpp:14:0:
/workspace/src/contrib/llvm/tools/lldb/include/lldb/Target/MemoryRegionInfo.h:128:54: error: 'template<class _InputIterator> lldb_private::MemoryRegionInfos::MemoryRegionInfos(_InputIterator, _InputIterator, const allocator_type&)' inherited from 'std::__1::vector<lldb_private::MemoryRegionInfo>'
using std::vector<lldb_private::MemoryRegionInfo>::vector;
^~~~~~
/workspace/src/contrib/llvm/tools/lldb/include/lldb/Target/MemoryRegionInfo.h:128:54: error: conflicts with version inherited from 'std::__1::vector<lldb_private::MemoryRegionInfo>'
Reported by: CI
Create new EINTEGRITY error with message "Integrity check failed".
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
lldb: remove assertion that target_arch is FreeBSD
The target is not necessarily a FreeBSD binary - for example, it may be
a Linux binary running under the linuxulator. Basic ptrace (live)
debugging already worked in this case, except for the assertion.
Sponsored by: Turing Robotic Industries Inc.
Do not include float interfaces when using libsa.
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
For our lldb customizations, instead of commenting out lines, use #ifdef
LLDB_ENABLE_ALL / #endif preprocess directives instead, so our diffs
against upstream only consist of added lines.
(Note that upstream has largely reshuffled the way optional lldb plugins
are handled, so we need a lot less of these #ifdefs. However, not all of
them can be dropped, unless we re-import several sources that we have
always skipped.)
This version omits the printing of a copyright header in interactive mode
and the dc command now exits after execution of the commands passed via -e
or -f instead of switching to interactive mode. To pass further commands
via STDIN when dc has been invoked with -e or -f, add "-f -" to the
parameter list.
This revision worked around an endless recursion when compiling clzdi2.c
and ctzdi2.c with gcc, upstream landed a different workaround for this
in https://reviews.llvm.org/rL324593, which is effective enough.
Noticed by: jrtc27
Merge lld trunk r321017 to contrib/llvm/tools/lld.
(Note that in this merge, I foolishly combined upstream changes with
this local change. But only this ifdef part is really needed, as we
always default to ELF link mode.)
Since this is contrib code, create an upstreamable version of my
change. Now on FreeBSD and NetBSD if _STANDALONE is defined, we
include the kernel version with alloances for the quirky differences
between the two.
Sponsored by: Netflix
o Replace __riscv__ with __riscv
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
libunwind: make __{de,}register_frame compatible with libgcc API
The libgcc __register_frame and __deregister_frame functions take a
pointer to a set of FDE/CIEs, terminated by an entry where length is 0.
In Apple's libunwind implementation the pointer is taken to be to a
single FDE. I suspect this was just an Apple bug, compensated by Apple-
specific code in LLVM.
See lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp and
http://lists.llvm.org/pipermail/llvm-dev/2013-April/061737.html
for more detail.
This change is based on the LLVM RTDyldMemoryManager.cpp. It should
later be changed to be alignment-safe.
Reported by: dim
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8869
Reapply r351610:
Update libunwind custom frame register and deregister functions for
FreeBSD: use the new doubly underscored names for unw_add_dynamic_fde
and unw_remove_dynamic_fde.
NOTE: this should be upstreamed...
Reapply r230021 (by ed):
Add a workaround to prevent endless recursion in compiler-rt.
SPARC and MIPS CPUs don't have special instructions to count
leading/trailing zeroes. The compiler-rt library provides fallback
rountines for these. The 64-bit routines, __clzdi2 and __ctzdi2, are
implemented as simple wrappers around the compiler built-in
__builtin_clz(), assuming these will expand to either 32-bit
CPU instructions or calls to __clzsi2 and __ctzsi2.
Unfortunately, our GCC 4.2 probably thinks that because the operand is
stored in a 64-bit register, it might just be a better idea to invoke
its 64-bit equivalent, simply resulting into endless recursion. Fix this
by defining __builtin_clz and __builtin_ctz to __clzsi2 and __ctzsi2
explicitly.
Reapply r276851:
Update compiler-rt to trunk r224034. This brings a number of new
builtins, and also the various sanitizers. Support for these will be
added in a later commit.
master 2e10b7a39b9, the last commit before the llvmorg-12-init tag, from
which release/11.x was branched.
Note that for now, I rolled back all our local changes to make merging
easier, and I will reapply the still-relevant ones after updating to
11.0.0-rc1.
In IEEE 1003.1-2008 [1] and earlier revisions, BRE/ERE grammar allows for
any character to be escaped, but "ORD_CHAR preceded by an unescaped
<backslash> character [gives undefined results]".
Historically, we've interpreted an escaped ordinary character as the
ordinary character itself. This becomes problematic when some extensions
give special meanings to an otherwise ordinary character
(e.g. GNU's \b, \s, \w), meaning we may have two different valid
interpretations of the same sequence.
To make this easier to deal with and given that the standard calls this
undefined, we should throw an error (EESCAPE) if we run into this scenario
to ease transition into a state where some escaped ordinaries are blessed
with a special meaning -- it will either error out or have extended
behavior, rather than have two entirely different versions of undefined
behavior that leave the consumer of regex(3) guessing as to what behavior
will be used or leaving them with false impressions.
This change bumps the symbol version of regcomp to FBSD_1.6 and provides the
old escape semantics for legacy applications, just in case one has an older
application that would immediately turn into a pumpkin because of an
extraneous escape that's embedded or otherwise critical to its operation.
This is the final piece needed before enhancing libregex with GNU extensions
and flipping the switch on bsdgrep.
[1] http://pubs.opengroup.org/onlinepubs/9699919799.2016edition/
PR: 229925 (exp-run, courtesy of antoine)
Differential Revision: https://reviews.freebsd.org/D10510
were cherry picked up the upstream OpenBSD repository. At some point we
will look at doing another import, but the diffs are substantial and will
require some careful testing.
Differential Revision: https://reviews.freebsd.org/D25021
MFC after: 2 weeks
Submitted by: gbe
Reviewed by: myself, bcr
- Handle whitespace with long flags that take arguments:
echo 'foo bar' > test
zgrep --regexp='foo bar' test
- Do not hang reading from stdin with patterns in a file:
echo foobar > test
echo foo > pattern
zgrep -f pattern test
zgrep --file=pattern test
- Handle any flags after -e:
echo foobar > test
zgrep -e foo --ignore-case < test
These two are still outstanding problems:
- Does not handle flags that take an argument if there is no
whitespace:
zgrep -enfs /etc/rpc
- When more than one -e pattern used matching should occur for all
patterns (similar to multiple patterns supplied with -f file).
Instead only the last pattern is used for matching:
zgrep -e rex -e nfs /etc/rpc
(This problem is masked in the unpatched version by the "any
flags after -e" problem.)
Add tests for the above problems.
Update the mange and add references to gzip(1) and zstd(1) and also
document the remaining known problems.
PR: 247126
Approved by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25613
gnu_debuglink external debug files will contain an .eh_frame section of
type SHT_NOBITS. libdwarf does not handle such sections (or rather, it
expects all debug sections to not have type SHT_NOBITS). Avoid loading
SHT_NOBITS sections, to be consistent with SGI libdwarf's handling of
this case.
PR: 239516
Diagnosed by: Paco Pascal <me@pacopascal.com>
Reviewed by: emaste (previous version)
Event: July 2020 Bugathon
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25626
and ipfstat -o where without an argument IPv4 and IPv6 states are
shown. Use -4 and -6 to limit the display to IPv4 or IPv6 respectively.
PR: 247952
MFC after: 1 week
ipfstat would list IPv4 outputs by default while -6 would produce IPv6
outputs. This commit combines the ipfstat -i and -o outputs into one
listing of IPv4 and IPv6 rules. The -4 option lists only IPv4 rules
(as the default before) while -6 continues to list only rules that affect
IPv6.
PR: 247952
Reported by: joeb1@a1poweruser.com
MFC after: 1 week
the kernel, not an arbitrary 4 or 6.
This only affected printing ipfilter stats and rules from a kernel
dump. (This is currently undocumented.)
PR: 247952
MFC after: 1 week
