Sync libarchive with vendor.
Relevant vendor changes:
PR #905: Support for Zstandard read and write filters
PR #922: Avoid overflow when reading corrupt cpio archive
Issue #935: heap-based buffer overflow in xml_data (CVE-2017-14166)
OSS-Fuzz 2936: Place a limit on the mtree line length
OSS-Fuzz 2394: Ensure that the ZIP AES extension header is large enough
OSS-Fuzz 573: Read off-by-one error in RAR archives (CVE-2017-14502)
MFC after: 1 week
Security: CVE-2017-14166, CVE-2017-14502
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
Sync libarchive with vendor
Vendor changes (FreeBSD-related):
- constify variables in several places
- unify platform ACL code in a single source file
- fix unused variable if compiling on FreeBSD without NFSv4 ACL support
MFC after: 3 days
X-MFC-with: 315636, 315876
Sync libarchive with vendor.
Vendor changes (FreeBSD-related):
- store extended attributes with extattr_set_link() if no fd is provided
- add extended attribute tests to libarchive and bsdtar
- fix tar's test_option_acls
- support the UF_HIDDEN file flag
X-MFC with: 315636
Update libarchive to version 3.3.1 (and sync with latest vendor dist)
Notable vendor changes:
PR #501: improvements in ACL path handling
PR #724: fix hang when reading malformed cpio files
PR #864: fix out of bounds read with malformed GNU tar archives
Documentation, style, test suite improvements and typo fixes.
New options to bsdtar that enable or disable reading and/or writing of:
Access Control Lists (--acls, --no-acls)
Extended file flags (--fflags, --no-fflags)
Extended attributes (--xattrs, --no-xattrs)
Mac OS X metadata (Mac OS X only) (--mac-metadata, --no-mac-metadata)
MFC after: 2 weeks
Sync libarchive with vendor
Vendor changes (relevant to FreeBSD):
- support extracting NFSv4 ACLs from Solaris tar archives
- bugfixes and optimizations in the ACL code
- multiple fixes in the test suite
- typo and other small bugfixes
Security fixes:
- cab reader: endless loop when parsing MSZIP signature (OSS-Fuzz 335)
- LHA reader: heap-buffer-overflow in lha_read_file_header_1()
(CVE-2017-5601)
- LZ4 reader: null-pointer dereference in lz4_filter_read_legacy_stream()
(OSS-Fuzz 453)
- mtree reader: heap-buffer-overflow in detect_form() (OSS-Fuzz 421, 443)
- WARC reader: heap-buffer-overflow in xstrpisotime() (OSS-Fuzz 382, 458)
Memory leak fixes:
- ACL support: free memory allocated by acl_get_qualifier()
- disk writer: missing free in create_filesystem_object()
- file reader: fd leak (Coverity 1016755)
- gnutar writer: fix free in archive_write_gnutar_header()
(Coverity 101675)
- iso 9660 reader: missing free in parse_file_info()
(partial Coverity 1016754)
- program reader: missing free in __archive_read_program()
- program writer: missing free in __archive_write_program_free()
- xar reader: missing free in xar_cleanup()
- xar reader: missing frees in expat_xmlattr_setup()
(Coverity 1229979-1229981)
- xar writer: missing free in file_free()
- zip reader: missing free in zip_read_local_file_header()
MFC after: 1 week
X-MFC with: 310866, 310868, 310870, 311899
Sync libarchive with vendor.
Vendor changes (relevant to FreeBSD):
PR #771: Add NFSv4 ACL support to pax and restricted pax
NFSv4 ACL information may now be stored to and restored from tar archives.
ACL must be non-trivial and supported by the underlying filesystem, e.g.
natively by ZFS or by UFS with the NFSv4 ACL enable flag set.
MFC after: 2 weeks
Relnotes: yes
Sync libarchive with vendor.
Vendor bugfixes (relevant to FreeBSD):
PR 846: Spelling fixes
PR 850: Fix issues with reading certain jar files
OSS-Fuzz 286: Bugfix in archive_strncat_l()
Sync libarchive with vendor.
Vendor bugfixes:
libarchive #831:
Spelling fixes
libarchive #832:
Relax sanity checks of number fields in tar header even more
OSS-Fuzz #16:
Fix possible hang in uudecode_filter_read()
OSS-Fuzz #220:
Reject an 'ar' filename table larger than 1GB or a filename larger
than 1MB.
MFC after: 1 week
Sync libarchive with vendor.
Small improvements, style fixes, bugfixes.
Restores compatibility with tar archives created with Perl Archive::Tar (1)
MFC after: 1 week
Reported by: Matthew Seaman <matthew@freebsd.org> (1)
Sync libarchive with vendor.
Important vendor bugfixes (relevant to FreeBSD):
#821: tar -P cannot extract hardlinks through symlinks
#825: Add sanity check of tar "uid, "gid" and "mtime" fields
PR: 213255
Reported by: Tijl Coosemans <tilj@FreeBSD.org>
MFC after: 1 week
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
Sync libarchive with vendor including security fixes.
Important vendor bugfixes (relevant to FreeBSD):
#747: Out of bounds read in mtree parser
#761: heap-based buffer overflow in read_Header (7-zip)
#784: Invalid file on bsdtar command line results in internal errors (1)
PR: 213092 (1)
MFC after: 1 week
Sync libarchive with vendor including important security fixes.
Issues fixed (FreeBSD):
PR #778: ACL error handling
Issue #745: Symlink check prefix optimization is too aggressive
Issue #746: Hard links with data can evade sandboxing restrictions
This update fixes the vulnerability #3 and vulnerability #4 as reported in
"non-cryptanalytic attacks against FreeBSD update components".
https://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
Fix for vulnerability #2 has already been merged in r304989.
MFC after: 1 week
Security: http://gist.github.com/anonymous/e48209b03f1dd9625a992717e7b89c4f
Sync libarchive with vendor
Vendor issues fixed:
PR #777: Multiple bugfixes for setup_acls()
This includes a bugfix for a bug that caused ACLs not to be read properly
for files and directories inside subdirectories and as a result not being
stored or being incorrectly stored in tar archives.
MFC after: 3 days
Sync libarchive with vendor including three security fixes
Vendor issues fixed:
Issue #744: Very long pathnames evade symlink checks
Issue #748: libarchive can compress, but cannot decompress zip some files
PR #750: ustar: fix out of bounds read on empty string ("") filename
PR #755: fix use of acl_get_flagset_np() on FreeBSD
MFC after: 3 days
Update libarchive to 3.2.1 (bugfix and security fix release)
List of vendor fixes:
- fix exploitable heap overflow vulnerability in Rar decompression
(vendor issue 719, CVE-2016-4302, TALOS-2016-0154)
- fix exploitable stack based buffer overflow vulnebarility in mtree
parse_device functionality (vendor PR 715, CVE-2016-4301, TALOS-2016-0153)
- fix exploitable heap overflow vulnerability in 7-zip read_SubStreamsInfo
(vendor issue 718, CVE-2016-4300, TALOS-2016-152)
- fix integer overflow when computing location of volume descriptor
(vendor issue 717)
- fix buffer overflow when reading a crafred rar archive (vendor issue 521)
- fix possible buffer overflow when reading ISO9660 archives on machines
where sizeof(int) < sizeof(size_t) (vendor issue 711)
- tar and cpio should fail if an input file named on the command line is
missing (vendor issue 708)
- fix incorrect writing of gnutar filenames that are exactly 512 bytes
long (vendor issue 682)
- allow tests to be run from paths that are equal or longer than 128
characters (vendor issue 657)
- add memory allocation errors in archive_entry_xattr.c (vendor PR 603)
- remove dead code in archive_entry_xattr_add_entry() (vendor PR 716)
- fix broken decryption of ZIP files (vendor issue 553)
- manpage style, typo and description fixes
Post-3.2.1 vendor fixes:
- fix typo in cpio version reporting (Vendor PR 725, 726)
- fix argument range of ctype functions in libarchive_fe/passphrase.c
- fix ctype use and avoid empty loop bodies in WARC reader
MFC after: 1 week
Security: CVE-2016-4300, CVE-2016-4301, CVE-2016-4302
Approved by: re (kib)
Update libarchive to 3.2.0
New features:
- new bsdcat command-line utility
- LZ4 compression (in src only via external utility from ports)
- Warc format support
- 'Raw' format writer
- Zip: Support archives >4GB, entries >4GB
- Zip: Support encrypting and decrypting entries
- Zip: Support experimental streaming extension
- Identify encrypted entries in several formats
- New --clear-nochange-flags option to bsdtar tries to remove noschg and
similar flags before deleting files
- New --ignore-zeros option to bsdtar to handle concatenated tar archives
- Use multi-threaded LZMA decompression if liblzma supports it
- Expose version info for libraries used by libarchive
Patched files (fixed compiler warnings):
contrib/libarchive/cat/bsdcat.c (vendor PR #702)
contrib/libarchive/cat/bsdcat.h (vendor PR #702)
contrib/libarchive/libarchive/archive_read_support_format_mtree.c (PR #701)
contrib/libarchive/libarchive_fe/err.c (vendor PR #703)
MFC after: 1 month
Relnotes: yes
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
the FreeBSD test suite
functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.
A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)
As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
We want to ensure we always use libarchive from ports in the ports tree.
It simplifies ports maintainance and anyway libarchive.pc was not reflecting the
different way libarchive can be built in base
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp