After 0ee0dbfb0d where I imported a more
recent libcxxrt snapshot, the variables 'rtn' and 'has_ret' could in
some cases be used while still uninitialized. Most obviously this would
lead to a jemalloc complaint about a bad free(), aborting the program.
Fix this by initializing a bunch variables in their declarations. This
change has also been sent upstream, with some additional changes to be
used in their testing framework.
PR: 253226
MFC after: 3 days
I did this without a full vendor update since that would cause too many
conflicts. Since these files now almost match the NetBSD sources the
next git subtree merge should work just fine.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D28797
In 0ee0dbfb0d I imported a more recent
libcxxrt snapshot, which includes an upstream fix for the padding of
struct _Unwind_Exception:
e458560b7e
However, we also had a similar fix in our tree as:
https://cgit.freebsd.org/src/commit/?id=3c4fd2463bb29f65ef1404011fcb31e508cdf2e2
Since having both fixes makes the struct too large again, it leads to
SIGBUSes when throwing exceptions on amd64 (or other LP64 arches). This
is most easily tested by running kyua without any arguments.
It looks like our fix is no longer needed now, so revert it to reduce
diffs against upstream.
PR: 253226
Reviewed by: arichardson, kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28799
Add three examples showing the use of `-h`, `-l`, `-t`, `-w`
christos@netbsd.org to be notified.
Reviewed by: bcr@, gbe@, imp@
Approved by: bcr@, gbe@ (mentor), imp@
Differential Revision: https://reviews.freebsd.org/D25242
Since 4581cefc1e
ATF opens the results file on startup. This fixes problems like
capsicumized tests not being able to open the file on exit.
However, this test closes all file descriptors above 3 to get a
deterministic fd table allocation for the child. Instead of using closefrom
(which will close the ATF output file FD) I've changed this test use
the lowest available fd and pass that to the helper program as a string.
We could also try to re-open the results file in ATF if we get a EBADF
error, but that will fail when running under Capsicum.
Reviewed By: cem
Differential Revision: https://reviews.freebsd.org/D28684
This update changes the behavior of "-e" or "-f" in BC_ENV_ARGS:
Use of these options on the command line makes bc exit after executing
the given commands. These options will not cause bc to exit when
passed via the environment (but EOF in STDIN or -e or -f on the
command line will make bc exit as before).
The same applies to DC_ENV_ARGS with regard to the dc program.
Importing flex 2.6.4 has introduced a regression: input() now returns 0
instead of EOF to indicate that the end of input was reached, just like
traditional AT&T and POSIX lex. Note the behavior contradicts flex(1).
See "INCOMPATIBILITIES WITH LEX AND POSIX" section for information.
This incompatibility traces back to the original version and documented
in its manual page by the Vern Paxson.
Apparently, it has been reported in a few places, e.g.,
https://github.com/westes/flex/issues/448https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911415
Unfortunately, this also breaks the scanner used by libdtrace and
dtrace is unable to resolve some probe argument types as a result. See
PR253440 for more information.
Note the regression was introduced by the following upstream commit
without any explanation or documentation change:
f863c9490e
Now we restore the traditional flex behavior unless lex-compatibility
mode is set with "-l" option because I believe the author originally
wanted to make it more lex and POSIX compatible.
PR: 253440
Reported by: markj
Since 4581cefc1e
ATF opens the results file on startup. This fixes problems like
capsicumized tests not being able to open the file on exit.
However, this test closes all file descriptors just to check that
socketpair returns fd 3+4 and thereby also closes the ATF results file.
This then results in an EBADF when writing the result so the test is
reported as broken.
While system calls that create new file descriptors (must?) use the lowest
available file descriptor number, it does not seem useful to test this
property here. Drop the check for FD==3/4 to unbreak the testsuite.
We could also try to re-open the results file in ATF if we get a EBADF
error, but that will fail when running under Capsicum.
Reviewed By: cem
Differential Revision: https://reviews.freebsd.org/D28683
The rpc_control() API does not accept the CLCR_SET_RPCB_TIMEOUT command,
it only accepts RPC_SVC_CONNMAXREC_GET/RPC_SVC_CONNMAXREC_SET, so it was
not doing anything.
Instead of incorrectly calling this API, use clnt_create_timed() instead.
I noticed this because the test was timing out after 120s in the CheriBSD CI.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28478
summary of changes, or for a more thorough overview:
https://subversion.apache.org/docs/release-notes/1.14
NOTE 1: There is no need to dump and reload repositories, and the
working copy format is still the same as Subversion 1.8 through 1.13.
NOTE 2: The upstream release also contains a fix for a security issue in
mod_dav_svn (CVE-2020-17525), but since we do not build or use any
Apache modules, it is not an issue for the FreeBSD base system.
Relnotes: yes
MFC after: 3 days
After d3338f3355, the lib/msun test case
'hypotl_near_underflow' would fail to compile on platforms where long
doubles weren't 80 bit, like on x86. Disable this particular test on
such platforms for now.
PR: 253313
MFC after: 1 week
X-MFC-With: d3338f3355
Changes of interest
o unit-tests: use private TMPDIR to avoid errors from other users
o avoid strdup in mkTempFile
o always use vfork
o job.c: do not create empty shell files in jobs mode
reduce unnecessary calls to waitpid
o cond.c: fix debug output for comparison operators in conditionals
This adjusts the factor used to scale the subnormal numbers, so it
becomes the right value after adjusting its exponent. Thanks to Steve
Kargl for finding the most elegant fix.
Also enable the hypot tests, and add a test case for this bug.
PR: 253313
MFC after: 1 week
The basic issue here is that grep, when given -m 1, would stop all
line processing once it hit the match count and exit immediately. The
problem with exiting immediately is that -A processing only happens when
subsequent lines are processed and do not match.
The fix here is relatively easy; when bsdgrep matches a line, it resets
the 'tail' of the matching context to the value supplied to -A and
dumps anything that's been queued up for -B. After the current line has
been printed and tail is reset, we check our mcount and do what's
needed. Therefore, at the time that we decide we're doing nothing, we
know that 'tail' of the context is correct and we can simply continue
on if there's still more to pick up.
With this change, we still bail out immediately if there's been no -A
flag. If -A was supplied, we signal that we should continue on. However,
subsequent lines will not even bothere to try and process the line. We
have reached the match count, so even if the next line would match then
we must process it if it hadn't. Thus, the loop in procfile() can
short-circuit and just process the line as a non-match until
procmatches() indicates that it's safe to stop.
A test has been added to reflect both that we should be picking up the
next line and that the next line should be considered a non-match even
if it should have been.
PR: 253350
MFC-after: 3 days
The null pattern semantics were terrible because I tried to match gnugrep,
but I got it wrong. Let's unwind that:
- The null pattern should match every line if neither -w nor -x.
- The null pattern should match empty lines if -x.
- The null pattern should not match any lines if -w.
The first two will stop processing (shortcut) even if additional patterns
are specified. In any other case, we will continue processing other
patterns. If no other patterns are specified beside a null pattern, then
we match if neither -w nor -x or set and do not match if either of those
are specified.
The justification for -w is that it should match on a whole word, but the
null pattern deos not have a whole word to match on.
Empty pattern files should never match anything, and more importantly, -v
should cause everything to be written.
PR: 253209
MFC-after: 4 days
This includes improvements to the atf-sh helper functions that
significantly reduce the number of spawned processes for each test
and therefore speeds up running the testsuite noticeably.
OpenSSL BIO classes provide an abstraction for dealing with I/O.
OpenSSL provides BIO classes for commonly used I/O primitives backed
by file descriptors, sockets, etc. as well as permitting consumers
of OpenSSL to define custom BIO classes.
One of the methods BIO classes implement is a control method invoked
by BIO_ctrl() for various ancilliary tasks somewhat analgous to
fcntl() and ioctl() on file descriptors. According to the BIO_ctrl(3)
manual page, control methods should return 0 for unknown control
requests.
KTLS support in OpenSSL adds new control requests. Two of those new
requests are queries to determine if KTLS is enabled for either
reading or writing. These control reuquest return 1 if KTLS is
enabled and 0 if it is not.
serf includes two custom BIO classes for wrapping I/O requests from
files and from a buffer in memory. These BIO classes both use a
custom control method. However, this custom control method was
returning 1 for unknown or unsupported control requests instead of 0.
As a result, OpenSSL with KTLS believed that these BIOs were using
KTLS and were thus adding headers and doing encryption/decryption in
the BIO. Correcting the return value removes this confusion.
PR: 253135
Reported by: Guido Falsi <mad@madpilot.net>
Reviewed by: emaste
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28472
In the old days when K&R C and STD C were each in use a workaround
(read hack) was required to allow the same code to work on each
without modification. All C compilers support STD C. We can finally
put the __P prototype to rest.
MFC after: 1 week
SVN r343917 fixed this for in-tree clang, but when building with a newer
out-of-tree clang the test was still marked as XFAIL.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28390
Merge commit 740a164de from llvm git (by Richard Smith):
PR46377: Fix dependence calculation for function types and typedef
types.
We previously did not treat a function type as dependent if it had a
parameter pack with a non-dependent type -- such a function type depends
on the arity of the pack so is dependent even though none of the
parameter types is dependent. In order to properly handle this, we now
treat pack expansion types as always being dependent types (depending on
at least the pack arity), and always canonically being pack expansion
types, even in the unusual case when the pattern is not a dependent
type. This does mean that we can have canonical types that are pack
expansions that contain no unexpanded packs, which is unfortunate but
not inaccurate.
We also previously did not treat a typedef type as
instantiation-dependent if its canonical type was not
instantiation-dependent. That's wrong because instantiation-dependence
is a property of the type sugar, not of the type; an
instantiation-dependent type can have a non-instantiation-dependent
canonical type.
Merge commit 9cf98d26e from llvm git (by Richard Smith):
PR46637: Fix handling of placeholder types in trailing-return-types.
Only permit a placeholder type in a trailing-return-type if it would
also have been permitted in the decl-specifier sequence of a
corresponding declaration with no trailing-return-type. The standard
doesn't actually say this, but this is the only thing that makes sense.
Also fix handling of an 'auto' in a trailing-return-type in a parameter
of a generic lambda. We used to crash if we saw such a thing.
Merge commit 234f51a65 from llvm git (by Richard Smith):
Don't crash if we deserialize a pack expansion type whose pattern
contains no packs.
Fixes a regression from 740a164dec483225cbd02ab6c82199e2747ffacb.
PR: 252892
Reported by: thierry
MFC after: 3 days
bfc99943b0 removed ndis(4) support however
wpa as delivered by the wpa upstream (w1.fi) enables NDIS by default.
This commit disables NDIS suppport in the w1.fi delivered build config,
circumventing the build failure.
All C compilers in 2021 support standard C and architectures that did
not were retired long ago. Simplify by removing now redundant
pre-standard C code.
MFC after: 1 week
determine the length of the routing table buffer. As of 81728a538d
wpa_supplicant is started before the routing table has been populated
resulting in the length of zero to be returned. This causes
wpa_supplicant to loop endlessly. (The workaround is to kill and restart
wpa_supplicant as by the time it is restarted the routing table is
populated.)
(Personally, I was not able to reproduce this unless wlan0 was a member of
lagg0. However, others experienced this problem on standalone wlan0.)
PR: 252844
Submitted by: shu <ankohuu _ outlook.com>
Reported by: shu <ankohuu _ outlook.com>
Reviewed by: cy
X-MFC with: 81728a538d
Differential Revision: https://reviews.freebsd.org/D28249
Quite a lot of churn on style, but lots of
good work refactoring complicated functions
and lots more unit-tests.
Thanks mostly to rillig at NetBSD
Some interesting entries from ChangeLog
o .MAKE.{UID,GID} represent uid and gid running make.
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o add more unit tests for META MODE
Merge commit '8e11a9b4250be3c3379c45fa820bff78d99d5946' into main
Change-Id: I464fd4c013067f0915671c1ccc96d2d8090b2b9c
