twice if the server bogusly returns an error with the NFSERR_RETERR
bit (bit 31) set. No actual NFS error has this bit set, but it seems
that amd will sometimes do this. This patch makes sure the NFSERR_RETERR
bit is cleared to avoid a crash.
PR: kern/153847
MFC after: 2 weeks
Allow the NFS client to use a max file size larger than 1TB for v3 mounts.
It now allows files up to OFF_MAX subject to whatever limit the server
advertises.
Reviewed by: rmacklem
Approved by: re (kib)
MFC after: 1 week
This was reported to the mailing list freebsd-net@freebsd.org
on July 21, 2011 under the subject "LOR with nfsclient sillyrename".
The LOR occurred when nfs_inactive() called vrele(sp->s_dvp)
while holding the vnode lock on the file in s_dvp. This patch
modifies the client so that it performs the vrele(sp->s_dvp)
as a separate task to avoid the LOR. This fix was discussed
with jhb@ and kib@, who both proposed variations of it.
Tested by: pho, jlott at averesystems.com
Submitted by: jhb (earlier version)
Reviewed by: kib
Approved by: re (kib)
MFC after: 2 weeks
the NFS subsystems use five of the rpcsec_gss/kgssapi entry points,
but since it was not obvious which others might be useful, all
nineteen were included. Basically the nineteen entry points are
set in a structure called rpc_gss_entries and inline functions
defined in sys/rpc/rpcsec_gss.h check for the entry points being
non-NULL and then call them. A default value is returned otherwise.
Requested by rwatson.
Reviewed by: jhb
MFC after: 2 weeks
VM_PAGER_AGAIN to VM_PAGER_ERROR for the uwritten pages. Return
VM_PAGER_AGAIN for the partially written page. Always forward at least
one page in the loop of vm_object_page_clean().
VM_PAGER_ERROR causes the page reactivation and does not clear the
page dirty state, so the write is not lost.
The change fixes an infinite loop in vm_object_page_clean() when the
filesystem returns permanent errors for some page writes.
Reported and tested by: gavin
Reviewed by: alc, rmacklem
MFC after: 1 week
in the old NFS client so that a forced dismount doesn't
get stuck in the VFS_SYNC() call that happens before
VFS_UNMOUNT() in dounmount(). Analagous to r222329 for the new NFS client.
An additional change is needed before forced dismounts will work.
PR: kern/157365
MFC after: 2 weeks
to both NFS clients. This avoids the crash reported by
Sergey Kandaurov (pluknet@gmail.com) to the freebsd-fs@
list with subject "[old nfsclient] different nmount()
args passed from mount vs mount_nfs" dated May 17, 2011.
Tested by: pluknet at gmail.com (old nfs client)
MFC after: 2 weeks
checking at open time. It may improve performance for read-only
NFS mounts. Use deliberately.
MFC after: 1 week
Reviewed by: rmacklem, jhb (earlier version)
NFS client (which I guess is no longer experimental). The fstype "newnfs"
is now "nfs" and the regular/old NFS client is now fstype "oldnfs".
Although mounts via fstype "nfs" will usually work without userland
changes, an updated mount_nfs(8) binary is needed for kernels built with
"options NFSCL" but not "options NFSCLIENT". Updated mount_nfs(8) and
mount(8) binaries are needed to do mounts for fstype "oldnfs".
The GENERIC kernel configs have been changed to use options
NFSCL and NFSD (the new client and server) instead of NFSCLIENT and NFSSERVER.
For kernels being used on diskless NFS root systems, "options NFSCL"
must be in the kernel config.
Discussed on freebsd-fs@.
when building kernels that don't have "options NFS_ROOT"
specified. I plan on moving the functions that use these
data structures into the shared code in sys/nfs/nfs_diskless.c
in a future commit. At that time, these definitions will no
longer be needed in nfs_vfsops.c and nfs_clvfsops.c.
MFC after: 2 weeks
set the f_flags field of "struct statfs". This had the interesting
effect of making the NFSv4 mounts "disappear" after r221014,
since NFSMNT_NFSV4 and MNT_IGNORE became the same bit.
Move the files used for a diskless NFS root from sys/nfsclient
to sys/nfs in preparation for them to be used by both NFS
clients. Also, move the declaration of the three global data
structures from sys/nfsclient/nfs_vfsops.c to sys/nfs/nfs_diskless.c
so that they are defined when either client uses them.
Reviewed by: jhb
MFC after: 2 weeks
"struct nfs_args" as the regular NFS client. This is needed
so that the old mount(2) syscall will work and it makes
sharing of the diskless NFS root code easier. Eary in the
porting exercise I introduced a new revision of nfs_args, but
didn't actually need it, thanks to nmount(2). I re-introduced the
NFSMNT_KERB flag, since it does essentially the same thing and
the old one would not have been used because it never worked.
I also added a few new NFSMNT_xxx flags to sys/nfsclient/nfs_args.h
that are used by the experimental NFS client.
MFC after: 2 weeks
PMC/SYSV/...).
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: arch@ (parts by rwatson, trasz, jhb)
X-MFC after: to be determined in last commit with code from this project
VNET socket push back:
try to minimize the number of places where we have to switch vnets
and narrow down the time we stay switched. Add assertions to the
socket code to catch possibly unset vnets as seen in r204147.
While this reduces the number of vnet recursion in some places like
NFS, POSIX local sockets and some netgraph, .. recursions are
impossible to fix.
The current expectations are documented at the beginning of
uipc_socket.c along with the other information there.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
Tested by: zec
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC after: 2 weeks
and vop_reclaim() methods. They seems to be unused, and the reported
situation is normal for the forced unmount.
MFC after: 1 week
X-MFC-note: keep prtactive symbol in vfs_subr.c
by both clients. Since the NLM uses various fields of the
nfsmount structure, those fields were extracted and put in a
separate nfs_mountcommon structure stored in sys/nfs/nfs_mountcommon.h.
This structure also has a function pointer for a function that
extracts the required information from the mount point and nfs vnode
for that particular client, for information stored differently by the
clients.
Reviewed by: jhb
MFC after: 2 weeks
fixed the issues with file descriptor locks, but the same problems are
present for vnode lock/user map lock.
If the nfs_asyncio() cannot find the free nfsiod, schedule task to
create new nfsiod and return error. This causes fall back to the
synchronous i/o for nfs_strategy(), or does not start read at all in
the case of readahead. The caller that holds vnode and potentially
user map lock does not wait for kproc_create() to finish, preventing
the LORs.
The change effectively reverts r203072, because we never hand off the
request to newly created nfsiod thread anymore.
Reviewed by: jhb
Tested by: jhb, pluknet
MFC after: 3 weeks
vnode lock and several locks needed during fork, like fd lock.
Instead, schedule the task to be executed in the taskqueue context. We
still waiting for the fork to finish, but the context of the thread
executing the task does not make real LORs with our vnode lock.
Submitted by: pluknet at gmail com
Reviewed by: jhb
Tested by: pho
MFC after: 3 weeks
directories for purposes of validating name cache entries. This
closes races where two updates to a file or directory within the same
second could result in stale entries in the name cache. While here,
remove the 'n_expiry' field as it is no longer used.
Reviewed by: rmacklem
MFC after: 1 week
boot.nfsroot.nfshandlelen and set the diskless root fs to
use NFSv3 and this file handle length when it is set. If
this environment variable is not set, the diskless root fs
will use NFSv2 and the same defaults as before. This fixes
the problem where the diskless nfs root fs had to be on a
FreeBSD server for NFSv3 to work, because it did not know
the correct file handle length and assumed the size used
by FreeBSD. Until pxeboot and loader are replaced by ones
built from commits coming soon, boot.nfsroot.nfshandlelen
will not be set by them and the diskless root fs will use
NFSv2 unless the /etc/fstab entry has the "nfsv3" option
specified.
Tested by: danny at cs.huji.ac.il
MFC after: 2 weeks
LK_CANRECURSE after a lock is created. Use them to implement macros that
otherwise manipulated the flags directly. Assert that the associated
lockmgr lock is exclusively locked by the current thread when manipulating
these flags to ensure the flag updates are safe. This last change required
some minor shuffling in a few filesystems to exclusively lock a brand new
vnode slightly earlier.
Reviewed by: kib
MFC after: 3 days
module that can be used by both the regular and experimental nfs
clients. This fixes the problem reported by jh@ where /dev/nfslock
would be registered twice when both nfs clients were used.
I also defined the size of the lm_fh field to be the correct value,
as it should be the maximum size of an NFSv3 file handle.
Reviewed by: jh
MFC after: 2 weeks
to avoid sending multiple ACCESS/GETATTR RPCs during a single open()
between VOP_LOOKUP() and VOP_OPEN(). Now we always send the RPC in
VOP_LOOKUP() and not VOP_OPEN() in the cases that multiple RPCs could be
sent.
MFC after: 2 weeks
name cache up into nfs_lookup() instead of nfs_open(). Continue this
trend by flushing the attribute cache for leaf nodes in nfs_lookup() during
an open() if we do a LOOKUP RPC. For NFSv3 this should generally be a NOP
as the attributes are flushed before fetching the post-op attributes from
the LOOKUP RPC which most (all?) NFSv3 servers provide, so the post-op
attributes should populate the cache.
Now all NFS open() calls will always clear the cached attributes during the
nfs_lookup() prior to nfs_open() in the !NMODIFIED case to provide CTOC.
As a result, we can remove the conditional flushing of the attribute
cache from nfs_open().
Reviewed by: rmacklem, bde
MFC after: 2 weeks
DIAGNOSTIC and #ifndef DIAGNOSTIC for debug assertions, prefer
KASSERT(). Also change one #ifdef DIAGNOSTIC in the new nfs server.
Submitted by: Mikolaj Golub <to.my.trociny gmail com>
MFC after: 2 weeks
file via NFS. Specifically, to satisfy close-to-open-consistency, the NFS
client always performs at least one RPC on a file during an open(2) to see
if the file has changed. Normally this RPC is an ACCESS or GETATTR RPC
that is forced by flushing a file's attribute cache during nfs_open() and
then requesting new attributes. However, if the file is noticed to be
stale during nfs_open(), the only recourse is to fail the open(2) call
with ESTALE. On the other hand, if the ACCESS or GETATTR RPC is sent
during nfs_lookup(), then the NFS client can fall back to a LOOKUP RPC to
obtain the new file handle in the case that a file has been replaced.
This change causes the NFS client to flush the attribute cache during
nfs_lookup() when validating a name cache hit if the attributes fetched
during nfs_lookup() can be reused in nfs_open(). This allows the client
to open a replaced file via the new file handle the first time that it
notices a replaced file rather than failing with ESTALE in some cases.
Reviewed by: rmacklem, bde
Reviewed by: mohans (older version)
MFC after: 1 week
the jail(8) command. [10:04]
Fix a one-NUL-byte buffer overflow in libopie. [10:05]
Correctly sanity-check a buffer length in nfs mount. [10:06]
Approved by: so (cperciva)
Approved by: re (kensmith)
Security: FreeBSD-SA-10:04.jail
Security: FreeBSD-SA-10:05.opie
Security: FreeBSD-SA-10:06.nfsclient
managed pages that didn't already have that lock held. (Freeing an
unmanaged page, such as the various pmaps use, doesn't require the page
lock.)
This allows a change in vm_page_remove()'s locking requirements. It now
expects the page lock to be held instead of the page queues lock.
Consequently, the page queues lock is no longer required at all by callers
to vm_page_rename().
Discussed with: kib
module. With r203732 it became apparent that creating the sysctl nodes
twice causes at least a warning, however the whole code shouldn't be
present twice in the first place.
Discussed with: rmacklem
remove the NFS server version in order to reduce code duplication.
The shared version now uses a second parameter how, which is passed
on to m_get(9) and m_getcl(9) as the server used M_WAIT while the
client requires M_DONTWAIT, and replaces the the previously unused
parameter hsiz.
- Change nfs_realign() to use nfsm_aligned() so as with other NFS code
the alignment check isn't actually performed on platforms without
strict alignment requirements for performance reasons because as the
comment suggests unaligned data only occasionally occurs with TCP.
- Change fha_extract_info() to use nfs_realign() with M_DONTWAIT rather
than M_WAIT because it's called with the RPC sp_lock held.
Reviewed by: jhb, rmacklem
MFC after: 1 week
Without this patch it was possible for a different thread that calls
nfs_asyncio() to snitch a newly created nfsiod thread that was
intended for another caller of nfs_asyncio(), because the nfs_iod_mtx
mutex was unlocked while the new nfsiod thread was created. This patch
labels the newly created nfsiod, so that it is not taken by another
caller of nfs_asyncio(). This is believed to fix the problem reported
on the freebsd-stable email list under the subject:
FreeBSD NFS client/Linux NFS server issue.
Tested by: to DOT my DOT trociny AT gmail DOT com
Reviewed by: jhb
MFC after: 2 weeks
This avoids a bogus negative name cache entry from persisting forever
when another client creates an entry with the same name within the
same NFS server time of day clock tick. The mount option negnametimeo
can be used to override the default timeout interval on a
per-mount-point basis. Setting negnametimeo to 0 disables negative
name caching for the mount point.
I also fixed one obvious typo where args.timeo should be
args.maxgrouplist.
Submitted by: jhb (earlier version)
Reviewed by: jhb
MFC after: 2 weeks
kernel to boot from NFS. [1]
Note: this is not a full virtualization of nfsclient. It is only does
what advertised above and nothing more.
Requested by: public demand [1]
Tested by: kris, ..
MFC after: 5 days
Specifically, clients only trust -ve cache entries while the directory
remains unchanged and discard any -ve cache entries for a directory when
they notice that the modification time of a directory entry changes. The
race involves two concurrent lookups as follows:
- Thread A does a lookup for file 'foo' which sends a lookup RPC to the
server. The lookup fails and the server replies.
- The 'foo' file is created (either by the same client or a different
client) updating the modification time on the parent directory of 'foo'.
- Thread B does a lookup for a different file 'bar' which updates the
cached attributes of the parent directory of 'foo' to reflect the new
modification time after 'foo' was created.
- Thread A finally resumes execution to parse the reply from the NFS
server. It adds a -ve cache entry and sets the cached value of the
directory's modification time that is used for invalidating -ve cached
lookups to the new modification time set by thread B.
At this point, future lookups of 'foo' will honor the -ve cached entry
until the cached entry is pushed out of the name cache's LRU or the
modification time of the parent directory is changed again by some other
change. The fix is to read the directory's modification time before
sending the lookup RPC and use that cached modification time when setting
the directory's cached modification time. Also, we do not add a -ve cache
entry if another thread has added -ve cache entry that set the directory's
cached modification time to a newer value than the value we read before
sending the lookup RPC.
Reviewed by: rmacklem
MFC after: 1 week
fixes their issues but one reports a failure in NFS ROOT. Revert
the change for now pending further investigation.
Reviewed by: bz
MFC after: immediately
module tries to install the same address again. This extra code
is removed, which was discovered by the removal of a call to
in_ifscrub() in r196714. This call to in_ifscrub is put back here
because the SIOCAIFADDR command can be used to change the prefix
length of an existing alias.
Reviewed by: kmacy
vnodes, since these nodes are not linked into the mount queue and,
as such, the vn_lock() cannot cause a deadlock so LORs are harmless.
Suggested by: kib
Approved by: kib (mentor)
MFC after: 3 days
context inside the RPC code.
Temporarily set td's cred to mount's cred before calling socreate() via
__rpc_nconf2socket().
Submitted by: rmacklem (in part)
Reviewed by: rmacklem, rwatson
Discussed with: dfr, bz
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
several critical bugs, including race conditions and lock order issues:
Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
sxlock. Either can be held to stablize the lists and indexes, but both
are required to write. This allows the list to be held stable in both
network interrupt contexts and sleepable user threads across sleeping
memory allocations or device driver interactions. As before, writes to
the interface list must occur from sleepable contexts.
Reviewed by: bz, julian
MFC after: 3 days
pathes, as far as I see and testing seems to confirm it. Comparision of
old_lock with LK_SHARED make sense only if vnode is locked by current
thread.
When downgrading, pass LK_RETRY to the vn_lock(), since otherwise
vn_lock() unlocks the doomed vnode, causing extra unlock.
Reported and tested by: pho
Approved by: re (rwatson)
MFC after: 3 weeks
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
r195704 for the experimental client. The patch avoids calling vn_lock()
for the case where nfs_nget() has acquired the same vnode as dvp,
since nfs_nget() has already locked the vnode.
Reviewed by: kib, jhb
Approved by: re (kensmith), kib (mentor)
kernel resources that block other threads, like vnode locks. The SIGSTOP
sent to such thread (process, rather) shall not stop it until thread
releases the resources.
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
around the sequence that drop vnode lock and then busies the mount point.
Not having vlocked node or direct reference to the mp allows for the
forced unmount to proceed, making mp unmounted or reused.
Tested by: pho
Reviewed by: jeff
Approved by: re (kensmith)
MFC after: 2 weeks
in_ifaddrhead and INADDR_HASH address lists.
Previously, these lists were used unsynchronized as they were effectively
never changed in steady state, but we've seen increasing reports of
writer-writer races on very busy VPN servers as core count has gone up
(and similar configurations where address lists change frequently and
concurrently).
For the time being, use rwlocks rather than rmlocks in order to take
advantage of their better lock debugging support. As a result, we don't
enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion
is complete and a performance analysis has been done. This means that one
class of reader-writer races still exists.
MFC after: 6 weeks
Reviewed by: bz
operating on the unmounted mount point and freed mount data in case of
forced unmount performed while dvp is unlocked to nget the target vnode.
Add missed calls to m_freem(mrep) there on error exits [1].
Submitted by: rmacklem [1]
Tested by: pho
MFC after: 2 weeks
nfs_bioread_check_cons(). This is required since it is possible
for the vnode to be vgonel()'d while in nfs_upgrade_vnlock() when
a forced dismount is in progress. Also, move the check for VI_DOOMED
in nfs_vinvalbuf() down to after nfs_upgrade_vnlock() and replace the
out of date comment for it.
Submitted by: jhb
Tested by: pho
Approved by: kib (mentor)
MFC after: 1 month
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
- Each socket upcall is now invoked with the appropriate socket buffer
locked. It is not permissible to call soisconnected() with this lock
held; however, so socket upcalls now return an integer value. The two
possible values are SU_OK and SU_ISCONNECTED. If an upcall returns
SU_ISCONNECTED, then the soisconnected() will be invoked on the
socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls. The
API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
the receive socket buffer automatically. Note that a SO_SND upcall
should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
instead of calling soisconnected() directly. They also no longer need
to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
state machine, but other accept filters no longer have any explicit
knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
while invoking soreceive() as a temporary band-aid. The plan for
the future is to add a new flag to allow soreceive() to be called with
the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
buffer locked. Previously sowakeup() would drop the socket buffer
lock only to call aio_swake() which immediately re-acquired the socket
buffer lock for the duration of the function call.
Discussed with: rwatson, rmacklem
an accessor function to get the correct rnh pointer back.
Update netstat to get the correct pointer using kvm_read()
as well.
This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.
Reviewed by: julian, rwatson, zec
X-MFC: not possible
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex. Jails may
have their own host information, or they may inherit it from the
parent/system. The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL. The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.
The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.
Approved by: bz (mentor)
on platforms with strict alignment requirements. In particular, this fixes the
problems with the new RPC transport on the arm platform.
Note: this adds yet another copy of nfs_realign(). I will attempt to refactor
after NFS_LEGACYRPC is removed.
Submitted by: sam
the VFS. Now all the VFS_* functions and relating parts don't want the
context as long as it always refers to curthread.
In some points, in particular when dealing with VOPs and functions living
in the same namespace (eg. vflush) which still need to be converted,
pass curthread explicitly in order to retain the old behaviour.
Such loose ends will be fixed ASAP.
While here fix a bug: now, UFS_EXTATTR can be compiled alone without the
UFS_EXTATTR_AUTOSTART option.
VFS KPI is heavilly changed by this commit so thirdy parts modules needs
to be recompiled. Bump __FreeBSD_version in order to signal such
situation.
previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
the removal of NQNFS, but was left in in case it was required for NFSv4.
Since our new NFSv4 client and server can't use it for their
requirements, GC the old mechanism, as well as other unused lease-
related code and interfaces.
Due to its impact on kernel programming and binary interfaces, this
change should not be MFC'd.
Proposed by: jeff
Reviewed by: jeff
Discussed with: rmacklem, zach loafman @ isilon
