Commit Graph

259 Commits

Author SHA1 Message Date
Michael Tuexen
d6e23cf0cf Use an event handler to notify the SCTP about IP address changes
instead of calling an SCTP specific function from the IP code.
This is a requirement of supporting SCTP as a kernel loadable module.
This patch was developed by markj@, I tweaked a bit the SCTP related
code.

Submitted by:		markj@
MFC after:		3 days
2019-10-13 18:17:08 +00:00
Michael Tuexen
cd2de8b735 Fix a locking issue in sctp_accept.
PR:			238520
Reported by:		pho@
MFC after:		1 week
2019-08-06 10:29:19 +00:00
Michael Tuexen
94962f6ba0 Improve consistency. No functional change.
MFC after:		3 days
2019-08-05 13:22:15 +00:00
Bjoern A. Zeeb
0ecd976e80 IPv6 cleanup: kernel
Finish what was started a few years ago and harmonize IPv6 and IPv4
kernel names.  We are down to very few places now that it is feasible
to do the change for everything remaining with causing too much disturbance.

Remove "aliases" for IPv6 names which confusingly could indicate
that we are talking about a different data structure or field or
have two fields, one for each address family.
Try to follow common conventions used in FreeBSD.

* Rename sin6p to sin6 as that is how it is spelt in most places.
* Remove "aliases" (#defines) for:
  - in6pcb which really is an inpcb and nothing separate
  - sotoin6pcb which is sotoinpcb (as per above)
  - in6p_sp which is inp_sp
  - in6p_flowinfo which is inp_flow
* Try to use ia6 for in6_addr rather than in6p.
* With all these gone  also rename the in6p variables to inp as
  that is what we call it in most of the network stack including
  parts of netinet6.

The reasons behind this cleanup are that we try to further
unify netinet and netinet6 code where possible and that people
will less ignore one or the other protocol family when doing
code changes as they may not have spotted places due to different
names for the same thing.

No functional changes.

Discussed with:		tuexen (SCTP changes)
MFC after:		3 months
Sponsored by:		Netflix
2019-08-02 07:41:36 +00:00
Michael Tuexen
1a91d6987c Fix a LOR in SCTP which was found by running syzkaller.
Submitted by:		rrs@
Reported by:		markj@
MFC after:		1 week
2019-07-23 18:07:36 +00:00
Michael Tuexen
8a956abe12 When calling sctp_initialize_auth_params(), the inp must have at
least a read lock. To avoid more complex locking dances, just
call it in sctp_aloc_assoc() when the write lock is still held.

Reported by:		syzbot+08a486f7e6966f1c3cfb@syzkaller.appspotmail.com
MFC after:		1 week
2019-07-14 12:04:39 +00:00
Michael Tuexen
3a4f12e3b1 Allow sending on demand SCTP HEARTBEATS only in the ESTABLISHED state.
This issue was found by running syzkaller.

MFC after:		3 days
2019-05-19 17:53:36 +00:00
Michael Tuexen
fc26bf717c Improve input validation for the IPPROTO_SCTP level socket options
SCTP_CONNECT_X and SCTP_CONNECT_X_DELAYED.

Some issues where found by running syzkaller.

MFC after:		3 days
2019-05-19 17:28:00 +00:00
Michael Tuexen
eb3b9ea3fe Fix a double free of an SCTP association in an error path.
This is joint work with rrs@. The issue was found by running
syzkaller.

MFC after:		1 week
2019-03-26 08:27:00 +00:00
Michael Tuexen
3a35ad54a8 Fix locking bug.
MFC after:		3 days
2019-03-08 18:17:57 +00:00
Michael Tuexen
5f98c80550 Remove debug output.
MFC after:		3 days
2019-03-02 16:10:11 +00:00
Michael Tuexen
bab9988af5 Allow SCTP stream reconfiguration operations only in ESTABLISHED
state.

This issue was found by running syzkaller.

MFC after:		3 days
2019-03-02 14:30:27 +00:00
Michael Tuexen
49f1449309 Handle the case when calling the IPPROTO_SCTP level socket option
SCTP_STATUS on an association with no primary path (early state).

This issue was found by running syzkaller.

MFC after:		3 days
2019-03-02 14:15:33 +00:00
Michael Tuexen
e57d481c5e Report the correct length when using the IPPROTO_SCTP level
socket options SCTP_GET_PEER_ADDRESSES and SCTP_GET_LOCAL_ADDRESSES.
2019-03-02 13:12:37 +00:00
Michael Tuexen
20ab225b61 Honor the memory limits provided when processing the IPPROTO_SCTP
level socket option SCTP_GET_LOCAL_ADDRESSES in a getsockopt() call.

Thanks to Thomas Barabosch for reporting the issue which was found by
running syzkaller.

MFC after:		3 days
2019-03-01 18:47:41 +00:00
Michael Tuexen
3aee58ca76 Improve consistency, not functional change.
MFC after:		3 days
2019-03-01 15:57:55 +00:00
Michael Tuexen
507bb10421 Fix a locking issue in the IPPROTO_SCTP level SCTP_PEER_ADDR_THLDS socket
option. The problem affects only setsockopt with invalid parameters.

This issue was found by syzkaller.

MFC after:		3 days
2019-02-10 13:55:32 +00:00
Michael Tuexen
6cf360772f Fix a locking bug in the IPPROTO_SCTP level SCTP_EVENT socket option.
This occurs when call setsockopt() with invalid parameters.

This issue was found by syzkaller.

MFC after:		3 days
2019-02-10 10:42:16 +00:00
Michael Tuexen
333669e016 Fix locking for IPPROTO_SCTP level SCTP_DEFAULT_PRINFO socket option.
This problem occurred when calling setsockopt() will invalid parameters.

This issue was found by running syzkaller.

MFC after:		3 days
2019-02-10 08:28:56 +00:00
Michael Tuexen
e4c42fa266 Fix an off-by-one error in the input validation of the SCTP_RESET_STREAMS
socketoption.

This was found by running syzkaller.

MFC after:		3 days
2019-02-05 10:13:51 +00:00
Michael Tuexen
d9ba240c1c Limit the user-controllable amount of memory the kernel allocates
via IPPROTO_SCTP level socket options.

This issue was found by running syzkaller.

MFC after:	1 week
2019-01-16 11:33:47 +00:00
Michael Tuexen
1a0b021677 Refactor the SHUTDOWN_PENDING state handling.
This is not a functional change but a preperation for the upcoming
DTrace support. It is necessary to change the state in one
logical operation, even if it involves clearing the sub state
SHUTDOWN_PENDING.

MFC after:		1 month
2018-08-21 13:25:32 +00:00
Michael Tuexen
839d21d62e Use the stacb instead of the asoc in state macros.
This is not a functional change. Just a preparation for upcoming
dtrace state change provider support.
2018-08-13 13:58:45 +00:00
Michael Tuexen
61a2188021 Use consistently the macors to modify the assoc state.
No functional change.
2018-08-13 11:56:21 +00:00
Michael Tuexen
0053ed28ff Whitespace changes due to changes in ident. 2018-07-19 20:16:33 +00:00
Michael Tuexen
b0471b4b95 Revert https://svnweb.freebsd.org/changeset/base/336503
since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
Michael Tuexen
7679e49dd4 Whitespace changes due to change if ident. 2018-07-19 19:33:42 +00:00
Michael Tuexen
ff34bbe9c2 Improve compliance with RFC 4895 and RFC 6458.
Silently dicard SCTP chunks which have been requested to be
authenticated but are received unauthenticated no matter if support
for SCTP authentication has been negotiated. This improves compliance
with RFC 4895.

When the application uses the SCTP_AUTH_CHUNK socket option to
request a chunk to be received in an authenticated way, enable
the SCTP authentication extension for the end-point. This improves
compliance with RFC 6458.

Discussed with:	Peter Lei
MFC after:	3 days
2018-06-06 19:27:06 +00:00
Michael Tuexen
efcf28ef77 Fix a logical inversion bug.
Thanks to Irene Ruengeler for finding and reporting this bug.

MFC after:	3 days
2018-04-08 12:08:20 +00:00
Michael Tuexen
3bcfd10fe1 Small cleanup, no functional change.
MFC after:	3 days
2018-04-08 11:50:06 +00:00
Pedro F. Giffuni
51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
Michael Tuexen
28a6adde1d Allow the setting of the MTU for future paths using an SCTP socket option.
This functionality was missing.

MFC after:	1 week
2017-11-03 20:46:12 +00:00
Michael Tuexen
ba5fc4cf78 Fix the reporting of the MTU for SCTP sockets when using IPv6.
MFC after:	1 week
2017-11-01 16:32:11 +00:00
Michael Tuexen
f55c326691 Fix locking issues found by Coverity scanning the usrsctp library.
MFC after:	3 days
2017-09-09 20:44:56 +00:00
Michael Tuexen
5ba7f91f9d Use memset/memcpy instead of bzero/bcopy.
Just use one variant instead of both. Use the memset/memcpy
ones since they cause less problems in crossplatform deployment.

MFC after:	1 week
2017-07-19 14:28:58 +00:00
Michael Tuexen
94f66d603a Honor the backlog field. 2017-06-23 08:35:54 +00:00
Gleb Smirnoff
779f106aa1 Listening sockets improvements.
o Separate fields of struct socket that belong to listening from
  fields that belong to normal dataflow, and unionize them.  This
  shrinks the structure a bit.
  - Take out selinfo's from the socket buffers into the socket. The
    first reason is to support braindamaged scenario when a socket is
    added to kevent(2) and then listen(2) is cast on it. The second
    reason is that there is future plan to make socket buffers pluggable,
    so that for a dataflow socket a socket buffer can be changed, and
    in this case we also want to keep same selinfos through the lifetime
    of a socket.
  - Remove struct struct so_accf. Since now listening stuff no longer
    affects struct socket size, just move its fields into listening part
    of the union.
  - Provide sol_upcall field and enforce that so_upcall_set() may be called
    only on a dataflow socket, which has buffers, and for listening sockets
    provide solisten_upcall_set().

o Remove ACCEPT_LOCK() global.
  - Add a mutex to socket, to be used instead of socket buffer lock to lock
    fields of struct socket that don't belong to a socket buffer.
  - Allow to acquire two socket locks, but the first one must belong to a
    listening socket.
  - Make soref()/sorele() to use atomic(9).  This allows in some situations
    to do soref() without owning socket lock.  There is place for improvement
    here, it is possible to make sorele() also to lock optionally.
  - Most protocols aren't touched by this change, except UNIX local sockets.
    See below for more information.

o Reduce copy-and-paste in kernel modules that accept connections from
  listening sockets: provide function solisten_dequeue(), and use it in
  the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
  infiniband, rpc.

o UNIX local sockets.
  - Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
    local sockets.  Most races exist around spawning a new socket, when we
    are connecting to a local listening socket.  To cover them, we need to
    hold locks on both PCBs when spawning a third one.  This means holding
    them across sonewconn().  This creates a LOR between pcb locks and
    unp_list_lock.
  - To fix the new LOR, abandon the global unp_list_lock in favor of global
    unp_link_lock.  Indeed, separating these two locks didn't provide us any
    extra parralelism in the UNIX sockets.
  - Now call into uipc_attach() may happen with unp_link_lock hold if, we
    are accepting, or without unp_link_lock in case if we are just creating
    a socket.
  - Another problem in UNIX sockets is that uipc_close() basicly did nothing
    for a listening socket.  The vnode remained opened for connections.  This
    is fixed by removing vnode in uipc_close().  Maybe the right way would be
    to do it for all sockets (not only listening), simply move the vnode
    teardown from uipc_detach() to uipc_close()?

Sponsored by:		Netflix
Differential Revision:	https://reviews.freebsd.org/D9770
2017-06-08 21:30:34 +00:00
Michael Tuexen
5d08768a2b Use the SCTP_PCB_FLAGS_ACCEPTING flags to check for listeners.
While there, use a macro for checking the listen state to allow for
easier changes if required.

This done to help glebius@ with his listen changes.
2017-05-26 16:29:00 +00:00
Michael Tuexen
10e0318afa Allow SCTP to use the hostcache.
This patch allows the MTU stored in the hostcache to be used as an
initial value for SCTP paths. When an ICMP PTB message is received,
store the MTU in the hostcache.

MFC after:	1 week
2017-04-29 19:20:50 +00:00
Michael Tuexen
d274bcc661 Fix an issue with MTU calculation if an ICMP messaeg is received
for an SCTP/UDP packet.

MFC after:	1 week
2017-04-26 20:21:05 +00:00
Michael Tuexen
6ebfa5ee14 Use consistently uint32_t for mtu values.
This does not change functionality, but this cleanup is need for further
improvements of ICMP handling.

MFC after:	1 week
2017-04-26 19:26:40 +00:00
Michael Tuexen
2aa116007c Take the SCTP common header into account when computing the
space available for chunks. This unbreaks the handling of
ICMPV6 packets indicating "packet too big". It just worked
for IPv4 since we are overbooking for IPv4.

MFC after:	1 week
2017-01-31 23:36:31 +00:00
Michael Tuexen
b7b84c0e02 Whitespace changes.
The toolchain for processing the sources has been updated. No functional
change.

MFC after:	3 days
2016-12-26 11:06:41 +00:00
Michael Tuexen
49656eefc8 Cleanup the names of SSN, SID, TSN, FSN, PPID and MID.
This made a couple of bugs visible in handling SSN wrap-arounds
when using DATA chunks. Now bulk transfer seems to work fine...
This fixes the issue reported in
https://github.com/sctplab/usrsctp/issues/111

MFC after:	1 week
2016-12-07 19:30:59 +00:00
Michael Tuexen
5b495f17a5 Whitespace changes.
The tools using to generate the sources has been updated and produces
different whitespaces. Commit this seperately to avoid intermixing
these with real code changes.

MFC after:	3 days
2016-12-06 10:21:25 +00:00
Michael Tuexen
26a5d52f03 Remove duplicate code, which is not protected by the appropriate locks.
MFC after: 3 days
2016-08-22 00:40:45 +00:00
Michael Tuexen
d1ea5fa9c2 Fix various bugs in relation to the I-DATA chunk support
This is joint work with rrs.

MFC after:	3 days
2016-08-06 12:33:15 +00:00
Michael Tuexen
55b8cd93ef Don't consider the socket when processing an incoming ICMP/ICMP6 packet,
which was triggered by an SCTP packet. Whether a socket exists, is just
not relevant.

Approved by: re (kib)
MFC after: 1 week
2016-06-23 09:13:15 +00:00
Bjoern A. Zeeb
3f58662dd9 The pr_destroy field does not allow us to run the teardown code in a
specific order.  VNET_SYSUNINITs however are doing exactly that.
Thus remove the VIMAGE conditional field from the domain(9) protosw
structure and replace it with VNET_SYSUNINITs.
This also allows us to change some order and to make the teardown functions
file local static.
Also convert divert(4) as it uses the same mechanism ip(4) and ip6(4) use
internally.

Slightly reshuffle the SI_SUB_* fields in kernel.h and add a new ones, e.g.,
for pfil consumers (firewalls), partially for this commit and for others
to come.

Reviewed by:		gnn, tuexen (sctp), jhb (kernel.h)
Obtained from:		projects/vnet
MFC after:		2 weeks
X-MFC:			do not remove pr_destroy
Sponsored by:		The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6652
2016-06-01 10:14:04 +00:00
Michael Tuexen
4f3b84b524 Make struct sctp_paddrthlds compliant to RFC 7829. 2016-05-26 11:38:26 +00:00