Commit Graph

223231 Commits

Author SHA1 Message Date
ae
fbde243b6c Hide warning about non-existent lookup tables and informational messages
about modified table entry when quied mode enabled.

Approved by:	re (hrs)
Obtained from:	Yandex LLC
2016-07-02 11:54:20 +00:00
np
d08d8c2ff3 cxgbe(4): Avoid a NULL dereference while dumping the L2 table. Entries
used by switching filters that rewrite L2 information do not have any
associated ifnet.

Approved by:	re@ (gjb@)
Sponsored by:	Chelsio Communications
2016-07-01 23:18:49 +00:00
nwhitehorn
1a2acce994 Clean up some FDT-related code in the PowerPC bootloader, improving error
checking and robustness. Prevents errors and crashes in FDT commands on
PowerMac G5 systems.

Approved by:	re (gjb)
2016-07-01 21:09:30 +00:00
skreuzer
5081308e1a Document 300777, Add support for GPIO, Sensors and interrupts on AXP209 PMIC
Approved by:	re (gjb, implicit, relnotes)
2016-07-01 20:25:59 +00:00
skreuzer
a6723080a2 Document r299688, Add support for H3 SoC
Approved by:	re (gjb, implicit, relnotes)
2016-07-01 20:19:02 +00:00
skreuzer
eebee32c82 Document r263698, Add code for enabling second CPU core for A20 SoC.
Approved by:	re (gjb, implicit, relnotes)
2016-07-01 20:16:35 +00:00
kib
38d067a317 When a process knote was attached to the process which is already exiting,
the knote is activated immediately.  If the exit1() later activates
knotes, such knote is attempted to be activated second time.  Detect
the condition by zeroed kn_ptr.p_proc pointer, and avoid excessive
activation.

Before r302235, such knotes were removed from the knlist immediately
upon activation.

Reported by:	truckman
Sponsored by:	The FreeBSD Foundation
Approved by:	re (gjb)
2016-07-01 20:11:28 +00:00
adrian
d6284376d0 [net80211] teach AMRR to log the initial MCS rate as "MCS X"
Otheriwse it logs it as the rate value, which is 0x80 (MCS flag) + MCS,
which isn't that helpful.

Approved by:	re (gjb)
2016-07-01 19:58:13 +00:00
hselasky
e531a038fb Fix detection of USB device disconnects in USB host mode when the USB
device is connected directly to the USB port of the DWC OTG, in this
case a RPI-zero.

PR:		210695
Approved by:	re (gjb)
MFC after:	1 week
2016-07-01 07:27:33 +00:00
delphij
62d3b94f4d MFV r302260: expat 2.2.0
Approved by:	re (kib)
2016-07-01 05:48:45 +00:00
gjb
cce5cf3ef4 Update 11.0 to ALPHA6.
Approved by:	re (implicit)
Sponsored by:	The FreeBSD Foundation
2016-07-01 00:00:35 +00:00
bz
2af4ea8fc2 In case of the global eventhandler make sure the current VNET
is still operational before doing any work;  otherwise we might
run into, e.g., destroyed locks.

PR:		210724
Reported by:	olevole olevole.ru
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Obtained from:	projects/vnet
Approved by:	re (gjb)
2016-06-30 19:32:45 +00:00
bz
0c1171f994 Virtualise ipfilter.
Split initializzation an teardown into module (global state) and VNET
(per virtual network stack) parts.  Virtualise global state, which is
not "const".

Cleanup eventhandlers, so that we can make use of the passed in argument
to get the vnet state from the ifp;  disable the "cloner" event as it is
too early, has no state, and can fire before initialisation (see comment
in the source).

Handle the dynamic sysctls specially.  The problem is that "ipmain"
is the virtualized struct, but the fields used for the sysctls are
hanging off memory allocated and attached to the virtualized "ipmain"
thus standard VNET macros and sysctl handling do not work.
We still say it is VNET sysctls to get the proper protection checks
in the VIMAGE case;  to solve the problem of accessing the right bit
of memory hanging of each per-VNET ipmain, we use a dedicated handler
function wrapping around sysctl_ipf_int() undoing the base calculation
from kern_sysctl.c and then adding the passed-in offset into the right
struct depending on handler.  A bit of a mess exposing VNET-internals
this way but the only way to keep the code without having to massively
restructure ipf internals.

Approved by:		re (hrs)
Sponsored by:		The FreeBSD Foundation
Obtained from:		projects/vnet
MFC after:		2 weeks
Reviewed by:		cy
Differential Revision:	https://reviews.freebsd.org/D7000
2016-06-30 15:01:07 +00:00
mav
b281d573a9 Revert r299454 and r299448.
Those changes were found confusing FreeBSD libc ACL code, that doesn't
differentiate ACL for directories and files, and report ACLs for all
directories created after those patches as non-trivial.  On the other
side these changes were considered wrong from POSIX and NFSv4 points of
view.  Until further investigation done upstream, revert those changes
locally in preparation for FreeBSD 11.0 release.

Approved by:	re (hrs)
2016-06-30 14:55:49 +00:00
cy
956164118e Remove dead code.
Approved by:	re@ (hrs@)
MFC after:	1 week
2016-06-30 14:53:46 +00:00
mm
d19e109faf MFV r302264:
Sync libarchive with vendor, bugfixes for tests:
- fix tests on filesystems without birthtime support, e.g. UFS1 (1)
- vendor issue #729: avoid use of C99 for-scope declarations in
  test_write_format_gnutar_filenames.c

MFC after:	1 week
PR:		204157 (1)
Approved by:	re (hrs)
2016-06-30 08:51:50 +00:00
tuexen
557adfd043 This patch fixes two bugs related to the setting of the I-Bit
for SCTP DATA and I-DATA chunks.
* For fragmented user messages, set the I-Bit only on the last
  fragment.
* When using explicit EOR mode, set the I-Bit on the last
  fragment, whenever SCTP_SACK_IMMEDIATELY was set in snd_flags
  for any of the send() calls.

Approved by:	re (hrs)
MFC after:	1 week
2016-06-30 06:06:35 +00:00
wma
eaf77c9cc6 ARM, ARM64: Workaround for buf_ring reordering
This patch offers a workaround to buf_ring reordering
    visible on armv7 and armv8. This is supposed to be
    removed once new buf_ring implementation is integrated
    into the tree.

    Obtained from:         Semihalf
    Reviewed by:           alc,emaste
    Differential Revision: https://reviews.freebsd.org/D6986
    Approved by:           re (gjb)
2016-06-30 05:18:37 +00:00
wma
2da75cc60b ARM64: fix DMAP calculation
Use arithmetic operators instead of logical. This fixes
    DMAP ranges calculation for ThunderX Dual Socket.

    Obtained from:         Semihalf
    Sponsored by:          Cavium
    Reviewed by:           zbb
    Differential Revision: https://reviews.freebsd.org/D7023
    Approved by:           re (gjb)
2016-06-30 04:58:19 +00:00
bz
c79242bce1 Move the ipfw_log_bpf() calls from global module initialisation to
per-VNET initialisation and virtualise the interface cloning to
allow a dedicated ipfw log interface per VNET.

Approved by:		re (gjb)
MFC after:		2 weeks
Sponsored by:		The FreeBSD Foundation
2016-06-30 01:33:14 +00:00
bz
47f08657c2 Remove unused global variables as well as unused memory
allocations from ipfilter in preparation for VNET support.

Suggested by:		cy (see D7000)
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Approved by:		re (gjb)
2016-06-30 01:32:12 +00:00
cperciva
94125daa17 Enable indirect segment I/Os by default in the Xen blkfront driver when
running on EC2.  Due to improvements in EC2, the performance penalty which
was present on some EC2 instances no longer exists, and enabling this
feature now consistently yields ~20% higher throughput with equal or lower
latency.

Reverts:	r286063
Approved by:	re (gjb)
MFC after:	2 weeks
Relnotes:	Improved disk throughput on EC2
2016-06-29 23:56:24 +00:00
gonzo
62a7c9548d Fixed FreeBSD/mips MALTA support for QEMU
Recource management functions in GT PCI controller driver
treated memory/IO resources as KSEG1 addresses, later during
activation these values would be increased by KSEG1 base again
rendering the address invalid and causing "bus error" trap.

Actual logic was converted to use real physical addresses,
so mapping takes place only during activation.

Submitted by:	Aleksandr Rybalko <ray@FreeBSD.org>
Approved by:	re (gjb)
2016-06-29 23:33:44 +00:00
bdrewery
c3a4dbd1d2 Flush every line when using meta mode and no -j or with -B.
Otherwise the output is buffered and it appears that make is stuck on something
long-running.  This problem is not present with -j as it uses different
code that was already flushing.

Discussed with:	sjg
Approved by:	re (blanket, META_MODE)
Sponsored by:	EMC / Isilon Storage Division
2016-06-29 22:54:01 +00:00
bdrewery
3ef66a1afe WITH_META_MODE: Avoid false-positive error due to missing .meta with build commands.
Sponsored by:	EMC / Isilon Storage Division
Approved by:	re (blanket, META_MODE)
2016-06-29 22:39:22 +00:00
sobomax
fa8fbeaaf4 1.Improve handling around last compressed block of the file, which is
necessary because CLOOP format lacks explicit EOF or length, so that
  in the presence of padding or when the CLOOP is put onto a larger
  partition upper level provider size may be larger. Bound amount
  of extra data that we might touch to the max length of the compressed
  block and detect zero-padding in the last cluster, which when
  sector is all-zero might cause us to emit bogus I/O error after
  decompression of that fails. To not make code any more complicated
  that it needs to be deal with it in lazy-manner, i.e. when we
  first access that specific cluster.

  This change also fixes stupid mistake in the LZMA code, inherited
  from geom_lzma, which does not share length of the output buffer
  buffer with the decompression routine, so that in the presence
  of corrupted or purposedly tailored data may easily cause heap
  overflow and kernel memory corruption.

  Beef up validation of the CLOOP TOC by checking that lengths of
  all but the last compressed clusters match upper limit set by
  the decompressor and improve some error diagnostic output while
  I am here.

2.Add kern.geom.uzip.attach_to tunable to artifically limit
  attaching uzip to certain devices in the dev tree only.

    For example the following only makes us attaching to the
    GPT labels:

    kern.geom.uzip.attach_to="gpt/*"

3.Add kern.geom.uzip.noattach_to, which does opposite to the (2)
  above, i.e. prevents geom_uzip from tasting / attaching to
  providers matching some pattern. By default we don't attach
  to our own kind, i.e. kern.geom.uzip.noattach_to="*.uzip".
  It saves us quite some CPU cycles, esp on low-end embedded
  systems.

Approved by:	re (gjb)
Differential Revision:	https://reviews.freebsd.org/D7013
2016-06-29 18:19:05 +00:00
avos
19e196315e net80211: fix LOR/deadlock in ieee80211_ff_node_cleanup().
Add new lock for stageq (part of ieee80211_superg structure) and
ni_tx_superg (part of ieee80211_node structure);
drop com_lock protection where it is used to protect them.

While here, drop duplicate OPACKETS counter incrementation.

ni_tx_ampdu is not protected with it (however, it is also used without
locking in other places; probably, it requires some other solution
to be thread-safe).

Tested with RTL8188CUS (AP) and RTL8188EU (STA).

NOTE: Since this change breaks KBI, all wireless drivers need to be
recompiled.

Reviewed by:	adrian
Approved by:	re (gjb)
Differential Revision:	https://reviews.freebsd.org/D6958
2016-06-29 17:25:46 +00:00
bdrewery
5c68448b2f Don't warn about needing filemon for makeman.
r287879 wasn't quite enough here since Makefile.inc1 is running
'make -C release -V VERSION' and hitting the warning.

Reported by:	lattera
Sponsored by:	EMC / Isilon Storage Division
Approved by:	re (blanket, META_MODE)
2016-06-29 16:45:01 +00:00
sbruno
7fe30bec23 Correct PERSISTENT RESERVE OUT command and populate scsi_cmd->length.
PR:	202625
Submitted by:	niakrisn@gmail.com
Reviewed by:	scottl kenm
Approved by:	re (gjb)
MFC after:	2 weeks
2016-06-29 16:41:37 +00:00
nwhitehorn
032d51d92b Fix fat-fingering: #if AIM should have been #ifdef AIM to avoid failures on
Book-E kernels.

Approved by:	re (gjb)
Pointy hat to:	nwhitehorn
2016-06-29 16:34:56 +00:00
nwhitehorn
74554ccb4a Do not rely on firmware having pre-enabled the MMU in a reasonable way for
late boot: enable it explicitly after installing the page tables. If booting
from an FDT, also make sure to escape the firmware's MMU context early
before overwriting firmware page tables.

Approved by:	re (gjb)
2016-06-29 14:40:43 +00:00
emaste
e45b60ce4b libcxxrt: correct mangled "typeinfo name" symbols in Version.map
r260553 added missing C++ typinfos to libcxxrt's version script.
It appears that a number of duplicate mangled symbols were added due to
a cut and paste error. Switch the second instances to _ZTS*,
typeinfo name for *.

Found by lld, which produces an error or warning for duplicate symbols.

Reviewed by:	dim
Approved by:	re (gjb)
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7011
2016-06-29 11:48:42 +00:00
smh
b24634094a Allow ZFS ARC min / max to be tuned at runtime
Prior to this change ZFS ARC min / max could only be changed using
boot time tunables, this allows the values to be tuned at runtime
using the sysctls:
* vfs.zfs.arc_max
* vfs.zfs.arc_min

When adjusting ZFS ARC minimum the memory used  will only reduce
to the new minimum given memory pressure.

Reviewed by:	allanjude
Approved by:	re (gjb)
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	Multiplay
Differential Revision:	https://reviews.freebsd.org/D5907
2016-06-29 07:55:45 +00:00
np
ecbf2c3532 cxgbe(4): Do not bring up an interface when IFCAP_TOE is enabled on it.
The interface's queues are functional after VI_INIT_DONE (which is short
of interface-up) and that's all that's needed for t4_tom to communicate
with the chip.

Approved by:	re@ (gjb@)
Sponsored by:	Chelsio Communications
2016-06-29 06:55:30 +00:00
cem
eaa90873e9 USB: Add Garmin FR230 device quirk (broken INQUIRY)
PR:		210544
Reviewed by:	hps
Approved by:	re
2016-06-29 06:42:20 +00:00
delphij
133af1c34d Vendor import of expat 2.2.0 (trimmed). 2016-06-29 06:24:30 +00:00
bz
2acea814a2 Several device drivers call if_alloc() and then do further checks and
will cal if_free() in case of conflict, error, ..
if_free() however sets the VNET instance from the ifp->if_vnet which
was not yet initialized but would only in if_attach(). Fix this by
setting the curvnet from where we allocate the interface in if_alloc().
if_attach() will later overwrite this as needed. We do not set the home_vnet
early on as we only want to prevent the if_free() panic but not change any
of the other housekeeping, e.g., triggered through ifioctl()s.

Reviewed by:	brooks
Approved by:	re (gjb)
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7010
2016-06-29 05:21:25 +00:00
bdrewery
1e1f5317b7 WITH_SYSTEM_COMPILER: Avoid using GCC4.8+ logic on native GCC4.2 platforms.
As the XXX notes, these should really be checking MK_GNUCXX since there is
already a version check in share/mk/src.opts.mk to disable it.  Fixing that
here is more complex though.  This could also be using X_COMPILER_FEATURES
but uses X_COMPILER_VERSION to keep in sync with the src.opts.mk logic.

Tested by:	andreast
Sponsored by:	EMC / Isilon Storage Division
Approved by:	re (gjb)
2016-06-29 01:50:30 +00:00
phk
8c8129e2bd Do not coredump if the packet is too long in the global (non-interface
associated) instance.

The result is that the packet is dropped without an indication
that smaller MTU is advisable, which is not optimal, but better
than a NULL pointer deref.

Approved by:	re (glebius)
2016-06-28 20:10:30 +00:00
bdrewery
a88a58d887 Use on crypto.x and rpc.x from the source tree.
This fixes the build when DESTDIR may be blank or not yet populated.
It also fixes reproducibility.

Submitted by:	brooks
Approved by:	re (gjb)
Differential Revision:	https://reviews.freebsd.org/D6455
2016-06-28 19:53:16 +00:00
sbruno
c6d7fbc03e Revert svn r302253 at the request/review of Ken M. This commit is
incorrect.

PR:		202625
Approved by:	re (implicit)
2016-06-28 18:32:15 +00:00
sbruno
90baee121f Correct PERSISTENT RESERVE OUT command and populate scsi_cmd->length.
PR:		202625
Submitted by:	niakrisn@gmail.com
Reviewed by:	scottl
Approved by:	re (hrs)
MFC after:	2 weeks
2016-06-28 18:08:47 +00:00
kib
42d92058c3 Currently the ntptime code and resettodr() are Giant-locked. In
particular, the Giant is supposed to protect against parallel
ntp_adjtime(2) invocations.  But, for instance, sys_ntp_adjtime() does
copyout(9) under Giant and then examines time_status to return syscall
result.  Since copyout(9) could sleep, the syscall result might be
inconsistent.

Another and more important issue is that if PPS is configured,
hardpps(9) is executed without any protection against the parallel
top-level code invocation. Potentially, this may result in the
inconsistent state of the ntptime state variables, but I cannot say
how serious such distortion is. The non-functional splclock() call in
sys_ntp_adjtime() protected against clock interrupts calling hardpps()
in the pre-SMP era.

Modernize the locking. A mutex protects ntptime data.  Due to the
hardpps() KPI legitimately serving from the interrupt filters (and
e.g. uart(4) does call it from filter), the lock cannot be sleepable
mutex if PPS_SYNC is defined.  Otherwise, use normal sleepable mutex
to reduce interrupt latency.

Reviewed by:	  imp, jhb
Sponsored by:	  The FreeBSD Foundation
Approved by:	  re (gjb)
Differential revision:	https://reviews.freebsd.org/D6825
2016-06-28 16:43:23 +00:00
kib
8543a46c50 Do not use Giant to prevent parallel calls to CLOCK_SETTIME(). Use
private mtx in resettodr(), no implementation of CLOCK_SETTIME() is
allowed to sleep.

Reviewed by:	  imp, jhb
Sponsored by:	  The FreeBSD Foundation
Approved by:	  re (gjb)
X-Differential revision:	https://reviews.freebsd.org/D6825
2016-06-28 16:42:40 +00:00
kib
fb3ea99e64 Complete r302215. TDF_SBDRY | TDF_SERESTART and TDF_SBDRY |
TDF_SEINTR flags values, unlike TDF_SBDRY, must be treated almost as
if TDF_SBDRY is not set for STOP signal delivery.  The only difference
is that sig_suspend_threads() should abort the sleep instead of doing
immediate suspension.

Reported by:	ngie
Sponsored by:	The FreeBSD Foundation
MFC after:	12 days
Approved by:	re (gjb)
2016-06-28 16:41:50 +00:00
jtl
be49875b46 Regenerate for WITH_EXTRA_TCP_STACKS updates.
Approved by:	re (gjb)
Sponsored by:	Juniper Networks
2016-06-28 13:42:50 +00:00
jtl
bbaee6454f Document support for alternate TCP stacks.
Differential Revision:	https://reviews.freebsd.org/D6940
Reviewed by:	hiren
Approved by:	re (gjb)
Sponsored by:	Juniper Networks
2016-06-28 13:37:01 +00:00
cy
96d5d9cf5d This commit addresses regression introduceded in r302177
(WITH_SYSTEM_COMPILER: Enable by default) and it's prerequisite: r300354,
caused i386 builds to fail when cross-built on an amd64 host.

Reviewed by:	bdrewery, delphij, gjb
Approved by:	re (gjb)
2016-06-28 07:47:42 +00:00
kib
8dad8cb1ad Fix userspace build after r302235: do not expose bool field of the
structure, change it to int.

The real fix is to sanitize user-visible definitions in sys/event.h,
e.g. the affected struct knlist is of no use for userspace programs.

Reported and tested by:	jkim
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
Approved by:	re (gjb)
2016-06-27 23:34:53 +00:00
kib
8ecc9fc9fd If the vm_fault() handler raced with the vm_object_collapse()
sleepable scan, iteration over the shadow chain looking for a page
could find an OBJ_DEAD object.  Such state of the mapping is only
transient, the dead object will be terminated and removed from the
chain shortly.  We must not return KERN_PROTECTION_FAILURE unless the
object type is changed to OBJT_DEAD in the chain, indicating that
paging on this address is really impossible.  Returning
KERN_PROTECTION_FAILURE prematurely causes spurious SIGSEGV delivered
to processes, or kernel accesses to UVA spuriously failing with
EFAULT.

If the object with OBJ_DEAD flag is found, only return
KERN_PROTECTION_FAILURE when object type is already OBJT_DEAD.
Otherwise, sleep a tick and retry the fault handling.

Ideally, we would wait until the OBJ_DEAD flag is resolved, e.g. by
waiting until the paging on this object is finished.  But to do so, we
need to reference the dead object, while vm_object_collapse() insists
on owning the final reference on the collapsed object.  This could be
fixed by e.g. changing the assert to shared reference release between
vm_fault() and vm_object_collapse(), but it seems to be too much
complications for rare boundary condition.

PR:	204426
Tested by:    pho
Reviewed by:  alc
Sponsored by: The FreeBSD Foundation
X-Differential revision:	https://reviews.freebsd.org/D6085
MFC after:	2 weeks
Approved by:	re (gjb)
2016-06-27 21:54:19 +00:00