When crypto_newsession() is given a request for an unsupported capability,
raise a more specific error than EINVAL.
This allows cryptotest.py to skip some HMAC tests that a driver does not
support.
Reviewed by: jhb, rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12451
If unwinding stops due to hitting the end of the call chain, the return
value is supposed to be _URC_END_OF_STACK; other values indicate internal
errors. The return value from get_eit_entry() is now returned without
translating it to _URC_FAILURE, so that callers can see _URC_END_OF_STACK
when it happens.
When raising an exception, the unwinder searches for a catch handler and if
none is found it should invoke std::terminate() with the uncaught exception
as the "current" exception. Before this change, the terminate handler was
invoked with no exception as current (abi::__cxa_current_exception_type()
returned NULL), because the return value from the unwinder indicated an
internal failure in unwinding. It turns out that was because all errors
from get_eit_entry() were translated to _URC_FAILURE. Now the error is
returned untranslated, which allows _URC_END_OF_STACK to percolate upwards
to throw_exception() in libcxxrt. When it sees that return status it
properly calls std::terminate() with the uncaught exception installed
as the current exception, allowing custom terminate handlers to work
with it.
vm_page_try_to_free() is testing conditions, like clean versus dirty,
that only vary in managed pages.
Suggested by: kib
Reviewed by: markj
X-MFC after: never
There was a panic() in the NFS server's write operation that didn't
need to be a panic() and could just be an error return.
This patch makes that change.
Found by code inspection during development of the pNFS service.
MFC after: 2 weeks
Like r266444, g_resize_provider_event can attempt to orphan an already
orphaned geom_dev consumer. This will cause a panic in g_dev_orphan. Apply
the same fix as was applied to g_orphan_register.
Reviewed by: ae
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12469
nfsm_uiombuflist() zero filled the mbuf list to a multiple of 4bytes
as required for XDR. Unfortunately that modified an mbuf list after
it was m_copym()'d and was broken. This patch removes the zero filling code.
Since nfsm_uiombuflist() is not yet used in head/current, this has no
effect on users.
The function will be used by a future commit of code that adds Flex
File Layout support.
can be avoided when the page's containing object has a reference count of
zero. (If the object has a reference count of zero, then none of its pages
can possibly be mapped.)
Address nearby style issues in vm_page_try_to_free(), and change its
return type to "bool".
Reviewed by: kib, markj
MFC after: 1 week
Merge in the missing devices from the IMX6 and ZEDBOARD kernel configs. The
Freescale sdma device has been renamed to fslsdma to mark it as a platform
specific driver.
Reviewed by: ian
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11564
This change allows to just call sdhci_start_slot() in SDHCI drivers
and not to think about which stack handles the operation.
As a side effect, this will also fix MMCCAM with sdhci_acpi driver.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12471
echo | awk 'BEGIN {i=$1; print i}' prints a boatload of stack
garbage. NUL terminate the memory returned from malloc to prevent it.
Obtained from: OpenBSD run.c 1.40
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D12379
out. Since it can't be paged out, it is never actually enqueued in a
paging queue. Nonetheless, passing PQ_INACTIVE to vm_page_unwire()
creates the appearance that the page "frame" is being enqueued in the
inactive queue. As of r288122, we can avoid this false impression by
passing PQ_NONE.
MFC after: 1 week
- Import print_function from __future__ and use print(..) instead of `print ..`.
- Use repr instead of backticks when the object needs to be dumped, unless
print(..) can do it lazily. Use str instead of backticks as appropriate
for simplification reasons.
This doesn't fully convert these modules over py3k. It just gets over some of
the trivial compatibility hurdles.
Add a DDB command that mirrors sysctl debug.witness.badstacks.
Reapply r323935 after fixing trivial deficiency. I forgot to compile with
WITNESS enabled. Thanks emaste@ for fixing the build while I was asleep.
Reported by: rstone
Reviewed by: rstone (previous version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12468
1) Choose correct Firmware options for HW LRO for best performance
2) Delete TBD and other comments which are not required.
3) Added sysctl interface to enable / disable / modify different factors
of HW LRO.
4) Disabled HW LRO by default to avoid issues with packet forwarding
This allows much better control over the LRO configuration via sysctls, and
uses much better defaults. Hardware LRO can now be enabled/disabled
independantly from the software LRO, and the tuning parameters are exposed.
manpage updates coming soon.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed by: shurd, sbruno
Approved by: sbruno (mentor)
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D12223
Move TX out of the enqueue() path. As a result, we need
to have ifmp_ring_check_drainage() pick up from the abdicate state.
We also need to either enqueue the TX task, or check drainage
after calling ifmp_ring_enqueue() to ensure it's sent.
This change results in a 30% small packet forwarding improvement.
Reviewed by: olivier, sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12439
Previously, it was just a pointer which was copied, but
some callers pass in a stack variable which will go out of scope.
Add GROUPTASK_NAMELEN macro (32) and snprintf() the name into it,
using "grouptask" if name is NULL. We can now safely include
gtask->gt_name in console messages.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12449
This allows tuning the rx budget for special load profiles
as well as more easily testing to determine sane defaults.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12445
Build a list of mbufs to pass to if_input() after LRO. Results in
12% small packet forwarding rate improvement.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12444
If the packet is smaller than MTU, disable the TSO flags.
Move TCP header parsing inside the IS_TSO?() test.
Add a new IFLIB_NEED_ZERO_CSUM flag to indicate the checksums need to be zeroed before TX.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12442
build on arm/armv6 images.
Pointyhat: gjb (myself)
MFC after: immediate
MFC note: releng/10.4 has broken because of this
Sponsored by: The FreeBSD Foundation
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
illumos/illumos-gate@42b141117242b1411172https://www.illumos.org/issues/8648
I'm opening this bug to track integration of the following ZFS on Linux
commit into illumos:
commit f763c3d1df569a8d6b60bcb5e95cf07aa7a189e6
Author: LOLi <loli10K@users.noreply.github.com>
Date: Mon Aug 21 17:59:48 2017 +0200
Fix range locking in ZIL commit codepath
Since OpenZFS 7578 (1b7c1e5) if we have a ZVOL with logbias=throughput
we will force WR_INDIRECT itxs in zvol_log_write() setting itx->itx_lr
offset and length to the offset and length of the BIO from
zvol_write()->zvol_log_write(): these offset and length are later used
to take a range lock in zillog->zl_get_data function: zvol_get_data().
Now suppose we have a ZVOL with blocksize=8K and push 4K writes to
offset 0: we will only be range-locking 0-4096. This means the
ASSERTion we make in dbuf_unoverride() is no longer valid because now
dmu_sync() is called from zilog's get_data functions holding a partial
lock on the dbuf.
Fix this by taking a range lock on the whole block in zvol_get_data().
Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Alexander Motin <mav@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: LOLi <loli10K@users.noreply.github.com>
MFC after: 10 days
