Commit Graph

5 Commits

Author SHA1 Message Date
Luiz Otavio O Souza
8d25059572 Move gpiobus routines to dev/gpio. Avoid polluting ofw_bus with bus
specific parts.

Requested by:	nwhitehorn
2014-05-04 04:01:26 +00:00
Luiz Otavio O Souza
628a40b5c4 Fix the gpio-specifier decoding by respecting the GPIO controller's
#gpio-cells property.

Add a new ofw_bus method (OFW_BUS_MAP_GPIOS()) that allows the GPIO
controller to implement its own mapping to deal with gpio-specifiers,
allowing the decoding of gpio-specifiers to be controller specific.

The default ofw_bus_map_gpios() decodes the linux standard (#gpio-cells =
<2>) and the FreeBSD standard (#gpio-cells = <3>).

It pass the gpio-specifier flag field to the children as an ivar variable so
they can act upon.
2014-04-27 12:11:00 +00:00
Nathan Whitehorn
bbc6da03ef Open Firmware interrupt specifiers can consist of arbitrary-length byte
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.
2014-02-01 17:17:35 +00:00
Nathan Whitehorn
f214848258 Add two new interfaces to ofw_bus:
- ofw_bus_map_intr()
  Maps an (iparent, IRQ) tuple to a system-global interrupt number in some
  platform dependent way. This is meant to be implemented as a replacement
  for [FDT_]MAP_IRQ() that is an MI interface that knows about the bus
  hierarchy.
- ofw_bus_config_intr()
  Configures an interrupt (previously mapped) based on firmware sense flags.
  This replaces manual interpretation of the sense field in bus drivers and
  will, in a follow-up, allow that interpretation to be redirected to the PIC
  drivers where it belongs. This will eventually replace the tables in
  /sys/dev/fdt/fdt_ARCH.c

The PowerPC/AIM code has been converted to use these globally, with an
implementation in terms of MAP_IRQ() and powerpc_config_intr(), assuming
OpenPIC, at the bus root in nexus(4). The ofw_bus_config_intr() will shortly
be integrated into pic_if.m and bounced through nexus into the PIC tree.

FDT integration will happen significantly later due to larger testing
requirements. This patch in general also lays the groundwork for the removal
of /sys/dev/fdt/fdt_ARCH.c and machine/fdt.h.
2013-10-23 17:24:21 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00