Precompute the new PTE before entering the critical section.
Eliminate duplication of the pmap and pv list unlock operations in
pmap_enter() by implementing a single return path. Otherwise, the
duplication will only increase with the upcoming support for psind == 1.
Reviewed by: mmel
Tested by: mmel
Discussed with: kib, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16443
Ifuncs selectors dispatch copyin(9) family to the suitable variant, to
set rflags.AC around userspace access. Rflags.AC bit is cleared in
all kernel entry points unconditionally even on machines not
supporting SMAP.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13838
According to the man page, getrusage(2) should return EFAULT if the rusage
argument lies outside of the process's address space. But due to an
oversight in r100384, that's never been the case during 32-bit emulation.
Fix it.
PR: 230153
Reported by: tests(7)
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16500
It allows locking or unlocking physical pages in memory within a jail
This allows running elasticsearch with "bootstrap.memory_lock" inside a jail
Reviewed by: jamie@
Differential Revision: https://reviews.freebsd.org/D16342
initial call to sched_balance() during startup is meant to initialize
balance_ticks, but does not actually do that since smp_started is
still zero at that time. Since balance_ticks does not get set,
there are no further calls to sched_balance(). Fix this by setting
balance_ticks in sched_initticks() since we know the value of
balance_interval at that time, and eliminate the useless startup
call to sched_balance(). We don't need to randomize the intial
value of balance_ticks.
Since there is now only one call to sched_balance(), we can hoist
the tests at the top of this function out to the caller and avoid
the overhead of the function call when running a SMP kernel on UP
hardware.
PR: 223914
Reviewed by: kib
MFC after: 2 weeks
I believe that a ReclaimComplete with rca_one_fs == TRUE is only
to be used after a file system has been transferred to a different
file server. However, RFC5661 is somewhat vague w.r.t. this and
the ESXi 6.7 client does both a ReclaimComplete with rca_one_fs == TRUE
and one with ReclaimComplete with rca_one_fs == FALSE.
Therefore, just ignore the rca_one_fs == TRUE operation and return
NFS_OK without doing anything instead of replying NFS4ERR_NOTSUPP.
This allows the ESXi 6.7 NFSv4.1 client to do a mount.
After discussion on the NFSv4 IETF working group mailing list, doing this
along with setting a flag to note that a ReclaimComplete with rca_one_fs TRUE
was an appropriate way to handle this.
The flag that indicates that a ReclaimComplete with rca_one_fs == TRUE was
done may be used to disable replies of NFS4ERR_GRACE for non-reclaim
state operations in a future commit.
This patch along with r332790, r334492 and r336357 allow ESXi 6.7 NFSv4.1 mounts
work ok. ESX 6.5 NFSv4.1 mounts do not work well, due to what I believe are
violations of RFC-5661 and should not be used.
Reported by: andreas.nagy@frequentis.com
Tested by: andreas.nagy@frequentis.com, daniel@ftml.net (earlier version)
MFC after: 2 weeks
Relnotes: yes
blocking vm map entry and object coalescing for the calling process.
However, there is no reason that mlockall(MCL_FUTURE) should block
such coalescing. This change enables it.
Reviewed by: kib, markj
Tested by: pho
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D16413
As discussed in arm@. This is a scaled back version of the prior
commit because xscale is overlaoded in places to mean armv5 or
similar. The OLD XSCALE stuff hasn't been useful in a while. The
original committer (cognet@) was the only one that had boards for
it. He's blessed this removal. Newer XSCALE (GUMSTIX) is for hardware
that's quite old. After discussion on arm@, it was clear there was no
support for keeping it.
Noticed by: andrew@
r336773 removed all things xscale. However, some things xscale are
really armv5. Revert that entirely. A more modest removal will follow.
Noticed by: andrew@
There's no differene between VM_FREELIST_ISADMA and VM_FREELIST_LOWMEM
except for the default boundary (16MB on x86 and 256MB on MIPS, but
they are otherwise the same). We don't need both for any system we
support (there were some really old ARC systems that did have ISA/EISA
bus, but we never ran on them and they are too old to ever grow
support for).
Differential Review: https://reviews.freebsd.org/D16290
The OLD XSCALE stuff hasn't been useful in a while. The original
committer (cognet@) was the only one that had boards for it. He's
blessed this removal. Newer XSCALE (GUMSTIX) is for hardware that's
quite old. After discussion on arm@, it was clear there was no support
for keeping it.
Differential Review: https://reviews.freebsd.org/D16313
Add std.ralink to define common things across all ralink configs.
Add cpu, machine and options INTRNG to this file.
Remove RT1310.hints file reference: that file isn't in our tree.
This port hasn't been updated since it was committed, apart from
housekeeping. There's no known users, and the known hardware for
this port is too thin to run FreeBSD/arm these days well.
This also removes the last armv4 port. We've had no reports of armv4
systems working since FreeBSD 8. All the kernel support for armv4 has
not been removed since it's too intertwined with armv5 support (which
remains in the tree).
RelNotes: Yes
No objection from: arm@
The last known robust version of this code base was FreeBSD 8.2. There
are no users of this on current, and all users of it have abandoned
this platform or are in legacy mode with a prior version of FreeBSD.
All known users on arm@ approved this removal, and there were no
objections.
Differential Revision: https://reviews.freebsd.org/D16312
register to determine if trap is from userspace.
Otherwise if we jump to kernel address from userspace, then
TRAPF_USERMODE failed to detect usermode and then do_ast
triggers a panic "ast in kernel mode".
Reviewed by: markj@
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16469
Do not use vm_map_remove() to release KVA back to the system. Because
kernel map entries do not have an associated VM object, with r336030
the vm_map_remove() call will not update the kernel page tables. Avoid
relying on the vm_map layer and instead update the pmap and release KVA
to the kernel arena directly in kmem_bootstrap_free().
Because the pmap updates will generally result in superpage demotions,
modify pmap_init() to insert PTPs shadowed by superpage mappings into
the kernel pmap's radix tree.
While here, port r329171 to i386.
Reported by: alc
Reviewed by: alc, kib
X-MFC with: r336505
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16426
the AMD document 55449 'Revision Guide for AMD Family 17h Models
00h-0Fh Processors' rev 1.12.
The errata numbers are mentioned near each action.
It seems that newer BIOSes already include required chicken bits
settings, so the magic MSR updates are only needed when BIOS cannot be
updated. On the other hand, MWAIT avoidance seems to be important.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If a timer is updated (re-added) with a different time period
(specified in the .data field of the kevent), the new time period has
no effect; the timer will not expire until the original time has
elapsed. This violates the documented behavior as the kqueue(2) man
page says (in part) "Re-adding an existing event will modify the
parameters of the original event, and not result in a duplicate
entry."
This modification, adapted from a patch submitted by cem@ to PR214987,
fixes the kqueue system to allow updating a timer entry. The
kevent timer behavior is changed to:
* When a timer is re-added, update the timer parameters to and
re-start the timer using the new parameters.
* Allow updating both active and already expired timers.
* When the timer has already expired, dequeue any undelivered events
and clear the count of expirations.
All of these changes address the original PR and also bring the
FreeBSD and macOS kevent timer behaviors into agreement.
A few other changes were made along the way:
* Update the kqueue(2) man page to reflect the new timer behavior.
* Fix man page style issues in kqueue(2) diagnosed by igor.
* Update the timer libkqueue system test to test for the updated
timer behavior.
* Fix the (test) libkqueue common.h file so that it includes
config.h which defines various HAVE_* feature defines, before the
#if tests for such variables in common.h. This enables the use of
the actual err(3) family of functions.
* Fix the usages of the err(3) functions in the tests for incorrect
type of variables. Those were formerly undiagnosed due to the
disablement of the err(3) functions (see previous bullet point).
PR: 214987
Reported by: Brian Wellington <bwelling@xbill.org>
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15778
There were some bits that were being set in cmd_flags (a field of AHCI's
command list structure) after cmd_flags was converted to little endian.
On a big endian host, such as PowerPC, this would set the wrong bits.
This was preventing AHCI driver from working on these hosts.
Reviewed by: jhibbits
Approved by: jhibbits (mentor)
read bias so we do reads in preference to TRIMs. This helps a lot when
many trims are delivered at once from the upper layers as they tend to
delay READs due to priority inversion in the code today.
The non iosched case will be fixed when the trim comibing changes
needed for nvme come in later this year.
Sponsored by: Netflix
In the V5 ABI the flags are EF_ARM_ABI_FLOAT_HARD and
EF_ARM_ABI_FLOAT_SOFT. The flags have the same values as the legacy GCC
flags EF_ARM_VFP_FLOAT and EF_ARM_SOFT_FLOAT respectively.
The legacy names are kept for compatibility.
Reported by: Peter Smith (Linaro)
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Start in "class" instead of "flow" mode. This eliminates the need to
specify an MTU, which is not available that early anyway. It also
allows the user to manually configure ch-rl rate limiting after attach.
This used to fail because ch-rl isn't supported if cl-rl "flow" mode is
configured.
Set all traffic classes to 1Gbps during initialization. The goal is to
start off with _any_ valid configuration and 1Gbps works even for
gigabit cards.
Sponsored by: Chelsio Communications
Previously, a step by PT_STEP resulted in no signal being raised to
the debugger so that a step was silently completed with the program
continuing to execute after the step. Fix by raising a SIGTRAP
signal with TRAP_TRACE as the signal code.
To simplify the error handling cases (if ptrace_clear_single_step()
fails, etc.) move the handling of PTRACE_BREAKPOINT into the
gdb_trapper() function. If ptrace_clear_single_step() fails,
gdb_trapper() won't claim the fault, and the default case of
SIGILL / ILL_OPC will be used.
Differential Revision: https://reviews.freebsd.org/D16100
