free'd by the functions following its call, we can simply return instead
of crashing and burning in the event of igb_detach() failing.
PR: 197139
Submitted by: rupavath@juniper.net
MFC after: 2 weeks
And factor out tcp_lro_rx_done, which deduplicates the same logic with
netinet/tcp_lro.c
Reviewed by: gallatin (1st version), hps, zbb, np, Dexuan Cui <decui microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5725
- At Intel it is believed that most of their products support "only"
40 DMA segments so lower {EM,IGB}_MAX_SCATTER accordingly. Actually,
40 is more than plenty to handle full size TSO packets so it doesn't
make sense to further distinguish between MAC variants that really
can do 64 DMA segments. Moreover, capping at 40 DMA segments limits
the stack usage of {em,igb}_xmit() that - given the rare use of more
than these - previously hardly was justifiable, while still being
sufficient to avoid the problems seen with em(4) and EM_MAX_SCATTER
set to 32.
- In igb(4), pass the actually supported TSO parameters up the stack.
Previously, the defaults set in if_attach_internal() were applied,
i. e. a maximum of 35 TSO segments, which made supporting more than
these in the driver pointless. However, this might explain why no
problems were seen with IGB_MAX_SCATTER at 64.
- In em(4), take the 5 m_pullup(9) invocations performed by em_xmit()
in the TSO case into account when reporting TSO parameters upwards.
In the worst case, each of these calls will add another mbuf and,
thus, the requirement for an additional DMA segment. So for best
performance, it doesn't make sense to advertize a maximum of TSO
segments that typically will require defragmentation in em_xmit().
Again, this leaves enough room to handle full size TSO packets.
- Drop TSO macros from if_lem.h given that corresponding MACS don't
support TSO in the first place.
Reviewed by: erj, sbruno, jeffrey.e.pieper_intel.com
Approved by: erj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D5238
Major changes:
- Add i219/i219(2) hardware support. (Found on Skylake generation and newer
chipsets.)
- Further to the last Skylake support diff, this one also includes support for
the Lewisburg chipset (i219(3)).
- Add a workaround to an igb hardware errata.
All 1G server products need to have IPv6 extension header parsing turned off.
This should be listed in the specification updates for current 1G server
products, e.g. for i350 it's errata #37 in this document:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/ethernet-controller-i350-spec-update.pdf
- Avoton (i354) PHY errata workaround added
And a bunch of minor fixes, as well as #defines for things that the current
em(4)/igb(4) drivers don't implement.
Differential Revision: https://reviews.freebsd.org/D3162
Reviewed by: sbruno, marius, gnn
Approved by: gnn
MFC after: 2 weeks
Sponsored by: Intel Corporation
causes watchdog timeouts when using TSO4 at link speeds below
Gigabit, at least with 82573E. So disable the assist automatically
when at lower speeds.
Submitted by: jfv
Approved by: erj
Obtained from: D3162
MFC after: 3 days
- Add optimizing LRO wrapper which pre-sorts all incoming packets
according to the hash type and flowid. This prevents exhaustion of
the LRO entries due to too many connections at the same time.
Testing using a larger number of higher bandwidth TCP connections
showed that the incoming ACK packet aggregation rate increased from
~1.3:1 to almost 3:1. Another test showed that for a number of TCP
connections greater than 16 per hardware receive ring, where 8 TCP
connections was the LRO active entry limit, there was a significant
improvement in throughput due to being able to fully aggregate more
than 8 TCP stream. For very few very high bandwidth TCP streams, the
optimizing LRO wrapper will add CPU usage instead of reducing CPU
usage. This is expected. Network drivers which want to use the
optimizing LRO wrapper needs to call "tcp_lro_queue_mbuf()" instead
of "tcp_lro_rx()" and "tcp_lro_flush_all()" instead of
"tcp_lro_flush()". Further the LRO control structure must be
initialized using "tcp_lro_init_args()" passing a non-zero number
into the "lro_mbufs" argument.
- Make LRO statistics 64-bit. Previously 32-bit integers were used for
statistics which can be prone to wrap-around. Fix this while at it
and update all SYSCTL's which expose LRO statistics.
- Ensure all data is freed when destroying a LRO control structures,
especially leftover LRO entries.
- Reduce number of memory allocations needed when setting up a LRO
control structure by precomputing the total amount of memory needed.
- Add own memory allocation counter for LRO.
- Bump the FreeBSD version to force recompilation of all KLDs due to
change of the LRO control structure size.
Sponsored by: Mellanox Technologies
Reviewed by: gallatin, sbruno, rrs, gnn, transport
Tested by: Netflix
Differential Revision: https://reviews.freebsd.org/D4914
alignment guarantees provided by m_defrag(9), use m_collapse(9)
instead for performance reasons.
While at it, sanitize the statistics softc members, i. e. retire
unused ones and add SYSCTL nodes missing for actually used ones.
Differential Revision: https://reviews.freebsd.org/D4717
e1000/e1000e split in linux.
Split rxbuffer and txbuffer apart to support the new RX descriptor format
structures. Move rxbuffer manipulation to em_setup_rxdesc() to unify the
new behavior changes.
Add a RSSKEYLEN macro for help in generating the RSSKEY data structures
in the card.
Change em_receive_checksum() to process the new rxdescriptor format
status bit.
MFC after: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D3447
in igb and fix a wrap-around bug.
Reviewed by: hiren
Obtained from: Jason (j@nitrology.com)
MFC after: 2 weeks
Sponsored by: LimeLight Networks
Differential Revision: https://reviews.freebsd.org/D4039
to attach with the last version of this commit. This commit fixes
attach failures on "ICH8" class devices via modifications to
e1000_init_nvm_params_ich8lan()
- Fix compiler warning in 80003es2lan.c
- Add return value handler for e1000_*_kmrn_reg_80003es2lan
- Fix usage of DEBUGOUT
- Remove unnecessary variable initializations.
- Removed unused variables (complaints from gcc).
- Edit defines in 82571.h.
- Add workaround for igb hw errata.
- Shared code changes for Skylake/I219 support.
- Remove unused OBFF and LTR functions.
Tested by some of the folks that reported breakage in previous incarnation.
Thanks to AllanJude, gjb, gnn, tijl for tempting fate with their machines.
Submitted by: erj@freebsd.org
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3162
doesn't get overrun by things like NFS that can and do shove more than 32 segs when
being used with em(4) and TSO4.
Update tso handling code in em_xmit() with update from jhb@ in email thread:
https://lists.freebsd.org/pipermail/freebsd-net/2014-July/039306.html
set ifp->if_hw_tsomax, ifp->if_hw_tsomaxsegcount & ifp->if_hw_tsomaxsegsize
to appropriate values.
Define a TSO workaround "magic" number of 4 that is used to avoid an
alignment issue in hardware.
Change a couple of integer values that were used as booleans to actual
bool types.
Ensure that em_enable_intr() enables the appropriate mask of interrupts
and not just a hardcoded define of values.
PR: 200221 199174 195078
Differential Revision: https://reviews.freebsd.org/D3192
Reviewed by: erj jhb hiren
MFC after: 2 weeks
Sponsored by: Limelight Networks
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:
- fix zerocopy monitor ports and introduce copying monitor ports
(the latter are lower performance but give access to all traffic
in parallel with the application)
- exclusive open mode, useful to implement solutions that recover
from crashes of the main netmap client (suggested by Patrick Kelsey)
- revised memory allocator in preparation for the 'passthrough mode'
(ptnetmap) recently presented at bsdcan. ptnetmap is described in
S. Garzarella, G. Lettieri, L. Rizzo;
Virtual device passthrough for high speed VM networking,
ACM/IEEE ANCS 2015, Oakland (CA) May 2015
http://info.iet.unipi.it/~luigi/research.html
- fix rx CRC handing on ixl
- add module dependencies for netmap when building drivers as modules
- minor simplifications to device-specific routines (*txsync, *rxsync)
- general code cleanup (remove unused variables, introduce macros
to access rings and remove duplicate code,
Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).
Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.
MFC after: 1 month
Sponsored by: (partly) Verisign, Cisco
up to 2 rx/tx queues for the 82574.
Program the 82574 to enable 5 msix vectors, assign 1 to each rx queue,
1 to each tx queue and 1 to the link handler.
Inspired by DragonFlyBSD, enable some RSS logic for handling tx queue
handling/processing.
Move multiqueue handler functions so that they line up better in a diff
review to if_igb.c
Always enqueue tx work to be done in em_mq_start, if unable to acquire
the TX lock, then this will be processed in the background later by the
taskqueue. Remove mbuf argument from em_start_mq_locked() as the work
is always enqueued. (stolen from igb)
Setup TARC, TXDCTL and RXDCTL registers for better performance and stability
in multiqueue and singlequeue implementations. Handle Intel errata 3 and
generic multiqueue behavior with the initialization of TARC(0) and TARC(1)
Bind interrupt threads to cpus in order. (stolen from igb)
Add 2 new DDB functions, one to display the queue(s) and their settings and
one to reset the adapter. Primarily used for debugging.
In the multiqueue configuration, bump RXD and TXD ring size to max for the
adapter (4096). Setup an RDTR of 64 and an RADV of 128 in multiqueue configuration
to cut down on the number of interrupts. RADV was arbitrarily set to 2x RDTR
and can be adjusted as needed.
Cleanup the display in top a bit to make it clearer where the taskqueue threads
are running and what they should be doing.
Ensure that both queues are processed by em_local_timer() by writing them both
to the IMS register to generate soft interrupts.
Ensure that an soft interrupt is generated when em_msix_link() is run so that
any races between assertion of the link/status interrupt and a rx/tx interrupt
are handled.
Document existing tuneables: hw.em.eee_setting, hw.em.msix, hw.em.smart_pwr_down, hw.em.sbp
Document use of hw.em.num_queues and the new kernel option EM_MULTIQUEUE
Thanks to Intel for their continued support of FreeBSD.
Reviewed by: erj jfv hiren gnn wblock
Obtained from: Intel Corporation
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D1994
applying them to em(4).
Rely on iterations through the local timer, and the tx queue state to
determine if an actual hang has occurred. Any time a descriptor is used
(packet sent), the tx queue is flagged as busy. Then when txeof runs, it
either clears the flag when all is clean, or resets it to 1 if ANY are
cleaned, if nothing is cleaned it increments the flag.
Local timer simply checks to see if busy ever reaches MAX (10, which
is compile time configurable), and then sets it as HUNG, at that point
there is one more timer cycle in which to have any cleans, if not a
watchdog reset will occur.
Differential Revision: https://reviews.freebsd.org/D2019
Submitted by: jfv
Reviewed by: hiren
Obtained from: Intel Corporation
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Limelight Networks
- Use hardware counters for ifnet stats in igb(4) when possible. This
ensures these stats include packets that bypass the regular stack via
netmap.
- Don't derefence values off the end of the igb(4) VF stats structure.
Instead, add a dedicated if_get_counter method for igb(4) VF interfaces.
- Report missed packets on igb(4) as input queue drops rather than an
input error.
- Report bug_ring drop counts as output queue drops for igb(4) and ixgbe(4).
- Export the buf_ring drop stats for individual rings via sysctl on
ixgbe(4).
- Fix a typo that in ixl(4) that caused output queue drops to be reported
as input queue drops and input queue drops to be unreported.
Differential Revision: https://reviews.freebsd.org/D2402
Reviewed by: jfv, rstone (6)
Sponsored by: Norse Corp, Inc.
RSS hash from the card. We do not need to hide that under "ifdef RSS" and should
expose that by default so others like lagg(4) can use that and avoid hashing the
traffic by themselves.
While here, improve comments and get rid of hidden/unimplemented RSS support
code for UDP.
Differential Revision: https://reviews.freebsd.org/D2296
Reviewed by: jfv, erj
Discussed with: adrian
Sponsored by: Limelight Networks
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
This allows one to make a kernel module to tune the
number of queues before the driver loads.
This is needed so that a module at SI_SUB_CPU can set
tunables for these drivers to take. Otherwise getenv
is called too early by the TUNABLE macros.
Reviewed by: smh
Phabric: https://reviews.freebsd.org/D1149
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
- Read the counts of received, dropped, and transmitted management
packets and add sysctl nodes for them.
- Fix the total octets received/transmitted to read all 64 bits of
the counters.
- Add missing sysctl nodes for rlec, tncrs, fcruc, tor, and tot.
- Remove spurious spaces.
Reviewed by: Eric Joyner @ Intel
MFC after: 1 week
