Previously, we sent a CSI 0m sequence to reset attributes, which also reset
the color scheme if the terminal defaults didn't match what we're expecting.
Go all-in and reset the color scheme, too, just in case.
Reported by: emaste
I accidentally swapped 'linux_fixup_elf' to 'linux_elf_fixup' in amd64's
declaration (only), while bringing this change over from git and
encountering a conflict.
So that -DNO_CLEAN builds work.
This should be reverted after a sufficient transition period (perhaps 3
or 6 months).
Sponsored by: The FreeBSD Foundation
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
context switch code.
Some BIOSes give control to the OS with CR0.WP already set, making the
kernel text read-only before cpu_startup().
Reported by: Peter Lei <peter.lei@ieee.org>
Reviewed by: jtl
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14768
This is a pure syntax patch to create an interface to enable and later
restore write access to the kernel text and other read-only mapped
regions. It is in line with e.g. vm_fault_disable_pagefaults() by
allowing the nesting.
Discussed with: Peter Lei <peter.lei@ieee.org>
Reviewed by: jtl
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14768
When using hardware crypto engines, the callback functions used to handle
an IPsec packet after it has been encrypted or decrypted can be invoked
asynchronously from a worker thread that is not associated with a vnet.
Extend 'struct xform_data' to include a vnet pointer and save the current
vnet in this new member when queueing crypto requests in IPsec. In the
IPsec callback routines, use the new member to set the current vnet while
processing the modified packet.
This fixes a panic when using hardware offload such as ccr(4) with IPsec
after VIMAGE was enabled in GENERIC.
Reported by: Sony Arpita Das and Harsh Jain @ Chelsio
Reviewed by: bz
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14763
It is possible to provide insane values for size in contigmalloc(9)
request, which usually not reaches the phys allocator due to failing
KVA allocation. But with the forthcoming 4/4 i386, where 32bit
architecture has almost 4G KVA, contigmalloc(1G) is not unreasonable
outright and KVA might be available sometimes.
Then, the calculation of pa_end could wrap around, depending on the
physical address, and the checks in vm_phys_alloc_seg_contig() would
pass while the iteration in the loop after the 'done' label goes out
of the vm_page_array bounds.
Fix it by detecting the wrap.
Reported and tested by: pho
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14767
It is incomplete, has not been adopted in the other locking primitives,
and we have other means of measuring lock contention (lock_profiling,
lockstat, KTR_LOCK). Drop it to slightly de-clutter the mutex code and
free up a precious KTR class index.
Reviewed by: jhb, mjg
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14771
This is originally based on a patch from David Chisnall for soft-float
N64 but has since been updated to support O32, N32, and hard-float ABIs.
The soft-float O32, N32, and N64 support has been committed upstream.
The hard-float changes are still in review upstream.
Enable LLVM_LIBUNWIND on mips when building with a suitable (C+11-capable)
toolchain. This has been tested with external GCC for all ABIs and
O32 and N64 with clang.
Reviewed by: emaste
Obtained from: CheriBSD (original N64 patch)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14701
The U-Boot efi runtime service expects us to set the address map before
calling any runtime services. It will then remap a few functions to their
runtime version. One of these is the gettime function. If we call into
this without having set a runtime map we get a page fault.
Add a check to see if this is valid in efi_init() so we don't try to use
the possibly invalid pointer.
Reviewed by: imp, kevans (both previous version)
X-MFC-With: r330868
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14759
latter casts the LBA to a 32-bit number before assigning it to the 64
bit structure entity. This works fine on the first 2TB of TRIMs, but
terrible beyond that due to trucation.
Also, add an assert to make sure we don't end too many DSM TRIM
entries in one request.
Sponsored by: Netflix
arg2 is an intmax_t, which on 32-bit architectures is 64 bits, wider than a
pointer. When &bdomain[i] is added to arg2 it widens from uintptr_t to
intmax_t, then gcc whines when it gets cast to a pointer. Casting through
uintptr_t silences this warning.
It has been replaced by /boot/dtb/overlays. We haven't yet populated it with
any of our own overlays, so no further damage from here.
Reported by: Oliver Pinter <oliver.pinter@hardenedbsd.org>
Ordinarily, the continue clause of the for-loop would free 'line.' In this
case we instead return early, missing the free. Add an explicit free to
avoid the leak.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
OF_finddevices returns ((phandle_t)-1) in case of failure. Some code
in existing drivers checked return value to be equal to 0 or
less/equal to 0 which is also wrong because phandle_t is unsigned
type. Most of these checks were for negative cases that were never
triggered so trhere was no impact on functionality.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14645
Version 16 is just a number bump, since we already had those changes.
Version 17 introduces new AdapterType value, that allows new user-space
tools from Broadcom to differentiate adapter generations 3 and 3.5.
Version 18 updates headers and adds SAS_DEVICE_DISCOVERY_ERROR reporting.
MFC after: 2 weeks
mtx_init does not do a copy of the name string it is passed. The
eventhandler code incorrectly passed the parameter string directly to
mtx_init instead of using the copy it makes. This was an existing
problem with the code that I dutifully copied over in my changes in r325621.
Reported by: Anton Rang <rang AT acm.org>
Reviewed by: rstone, markj
Approved by: rstone (mentor)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14764
It's preferable to have a consistent prefix. This also reduces
differences between the three linux*_sysvec.c files.
Sponsored by: Turing Robotic Industries Inc.
If a user attempts to add two tables with the same name the duplicate table
will not be added, but we forgot to free the duplicate table, leaking memory.
Ensure we free the duplicate table in the error path.
Reported by: Coverity
CID: 1382111
MFC after: 3 weeks
This patch will:
- Update ixgbe shared code
- Add support for Intel(R) Ethernet Connection X552 1000BASE-T
- Add error handling for link state check preventing VF from stopping traffic
after changing PF's MTU value
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: Intel Networking
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D13885
The ch(4) driver was missed in change 328918, which changed
cam_periph_acquire() to return an errno instead of cam_status.
As a result, ch(4) failed to attach.
Sponsored by: Spectra Logic
The 'physio' fast-path used by AIO requests on md(4) devices, is not
gated on the unsafe_aio knob. Prior to r327755, some AIO requests could
fail the fast-path and fall back to the slow-path (requests for devices
not supporting unmapped I/O and requests which failed with EFAULT during
the fast-path). However, those cases now return a suitable error rather
than using the slow-path.
PR: 217261
Reviewed by: asomers
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14742
ECN (ABE)" proposal to the New Reno congestion control algorithm module.
ABE reduces the amount of congestion window reduction in response to
ECN-signalled congestion relative to the loss-inferred congestion response.
More details about ABE can be found in the Internet-Draft:
https://tools.ietf.org/html/draft-ietf-tcpm-alternativebackoff-ecn
The implementation introduces four new sysctls:
- net.inet.tcp.cc.abe defaults to 0 (disabled) and can be set to non-zero to
enable ABE for ECN-enabled TCP connections.
- net.inet.tcp.cc.newreno.beta and net.inet.tcp.cc.newreno.beta_ecn set the
multiplicative window decrease factor, specified as a percentage, applied to
the congestion window in response to a loss-based or ECN-based congestion
signal respectively. They default to the values specified in the draft i.e.
beta=50 and beta_ecn=80.
- net.inet.tcp.cc.abe_frlossreduce defaults to 0 (disabled) and can be set to
non-zero to enable the use of standard beta (50% by default) when repairing
loss during an ECN-signalled congestion recovery episode. It enables a more
conservative congestion response and is provided for the purposes of
experimentation as a result of some discussion at IETF 100 in Singapore.
The values of beta and beta_ecn can also be set per-connection by way of the
TCP_CCALGOOPT TCP-level socket option and the new CC_NEWRENO_BETA or
CC_NEWRENO_BETA_ECN CC algo sub-options.
Submitted by: Tom Jones <tj@enoti.me>
Tested by: Tom Jones <tj@enoti.me>, Grenville Armitage <garmitage@swin.edu.au>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D11616
The former is fairly vague; these are FDT overlays to be applied to the
running system, so /boot/dtb is a sensible location to put it without
cluttering up /boot/dtb even further if desired.
The console may have been set for different colors before lualoader kicks
in; notably, a black-on-white color scheme is not necessarily what we're
expecting.
While here, make color.default() a composition of color.escape() instead of
rewriting the escape sequence to make it more obvious what it's achieving: a
white-on-black color scheme with no attributes set.
Reported by: emaste, whose eyes may rest easily
These problems have only been observed with boards using U-Boot (e.g. ARM)
where virtual addresses are already set in the memory map by the firmware
and the firmware is expecting a call to SetVirtualAddressMap to be made.
I refrain from mentioning this in the note because this could also be the
case on some not-yet-tested firmware on amd64 and it's not a bad
recommendation for the general case.
There's a fair amount of duplication between MD linuxulator files.
Make indentation and comments consistent between the three versions of
linux_sysvec.c to reduce diffs when comparing them.
Sponsored by: Turing Robotic Industries Inc.
